How to Rekey All House Locks in Devore in One Visit

What to expect in Devore

People sometimes ask why they should rekey all house locks when only one key is known to be missing. The honest answer is that keys spread in ways nobody tracks. A standard house key can be copied at a hardware store kiosk in seconds, and a Do Not Duplicate stamp is a request, not a barrier. A key loaned to a contractor may have been copied for a helper. A key you think fits only the back door may also open the front if a previous owner keyed them alike. If you can't account for every copy, partial rekeys leave gaps you can't see. Rekeying everything at once closes them in one step, and it's far less expensive than replacing every lock, because the knobs, deadbolts, handlesets and finishes stay on your doors. The other benefit is a fresh start on key control: a known number of new keys, given to people you chose, with a written list of who holds one.

Work included on a typical visit

• Re-pinning every exterior door. Exterior doors in Southern California see sun, dust and sprinkler overspray, and their cylinders show it. As we rekey all house locks, we note any door that binds or drags, and adjust strikes or hinges where it's quick to do. A freshly pinned cylinder lasts much longer when the door isn't fighting it.
• Garage access points. The garage usually has more ways in than any other part of the house: the door into the home, a side service door, sometimes a manual T-handle lock on the overhead door, plus remotes and a keypad. We re-pin every keyed cylinder there and remind you that the opener's remotes and keypad code need resetting separately.
• Outbuildings, casitas and padlocks. A detached casita or guest house with its own entry often needs a different key from the main house, especially if someone lives in it. We can key it separately or set up a small master arrangement, so your key opens it but the occupant's key doesn't open your house. That plan comes before any re-pinning.
• Bringing mixed brands onto one key. Standardizing on one brand pays off later too. Spare parts, future rekeys and added locks are simpler when the house shares a single keyway. If you're planning to replace a few worn locks anyway, a whole-house rekey is the natural moment to bring everything onto one brand and one key in a single trip.
• Separate keys and simple master keying. For most single-family homes, the best plan is the simplest one that fits how you live. One key for the house, perhaps one for an outbuilding, and keypad codes for occasional visitors usually covers it. We'll suggest a structure, but you choose, and the plan is written down before any pins come out.

Local factors in Devore

Inland summer heat in Devore bakes door hardware. Finishes fade, latches swell and stick, and cylinders collect fine dust that makes keys drag. Re-pinning a lock is a good moment to clean it and replace tired springs. During a whole-house rekey we note which locks feel gritty or stiff, because heat-stressed hardware often fails soon after. West-facing doors and garage entries tend to be the worst, and we can quote replacements alongside the rekey.

Hillside and foothill homes in Devore often have multiple levels, deck doors, side stairs and retaining-wall gates, so the entry count runs higher than the doors you use daily. Wind-driven dust and ash settle into cylinders, and we clean each one as we re-pin it. Keep exits operable from inside for fire season, and make sure whoever evacuates with the family keys knows which ones matter. We plan for steep driveways when scheduling.

Larger lots in rural parts of San Bernardino County stretch the usual house-key list across barns, workshops, gates and equipment sheds. A whole-house rekey on a ranch property is really a whole-property rekey, and the walk-through takes real time. Padlocks and gate hardware are exposed to dust and moisture, so we replace worn ones with keyed-alike padlocks instead of re-pinning cylinders that won't hold. Tell us about every gate and building before we quote.

Situations this covers

• After a separation, a homeowner in Devore wants every lock changed before her partner collects his belongings. The front door is the obvious one, but the walk-through turns up nine more cylinders: the garage side door, a slider latch, two gates, a shed and more. We re-pin them all to one new key during a single visit, and she sets a fresh code on her smart lock before we leave.
• A homeowner installs a Schlage Encode on the front door and considers the house secured. The back door, garage entry and side gate still use the old key that a former contractor copied. We rekey those to match the Encode's backup cylinder, so a single physical key opens everything, and we show her how to prune old app users.
• A homeowner converts a detached garage into a rental unit with its own door and a small side gate. She wants her key to open everything, while the tenant's key opens only the unit and the gate. We rekey the entire property with a two-level setup, so the tenant's key can never reach the main house, and we record which cylinders carry the extra pins.
• A homeowner uses a kit on the front and back doors, then learns months later that the garage side door still opens with the old key. Nobody wrote that door down. A whole-house count prevents exactly this gap. We list every keyhole first, including screens and the knob under the deadbolt, and the job isn't finished until each one has been tried with the new key.

From your call to the finished job

1. Count the keyholes before we arrive. Tell us why you're rekeying. A separation, an inherited house and years of loaned copies call for slightly different plans. Knowing the reason helps us ask about codes, remotes and hidden spares you might not think to mention.
2. Gather every key and show you belong at the address. No working key for a few locks? Say so. We can still rekey them after verifying who you are, though locks that have to be opened or removed first take longer. Give us the history and we'll bring the right tools.
3. Agree on the key plan before any pins come out. This is the moment to decide about odd locks. A rusted gate latch, a worn knob or a slider with no cylinder may be replaced, left off the plan or handled separately. We explain your options for each and quote them before work begins.
4. Rekey one door at a time and test as we go. We work in an order that keeps you secure: exterior doors first, then the garage, then gates and outbuildings. If your schedule allows only part of the job on one day, the most exposed doors are the ones finished first.
5. Cut, count and test every key. New keys are cut from the same code used to pin the cylinders. We try each key in every lock it should open, and in locks it shouldn't, to confirm the plan worked and the old keys are dead. Then you count them with us.
6. Reset what rekeying doesn't touch. Rekeying changes metal keys only. Garage remotes, keypad codes, smart lock users, alarm codes and any lockbox are separate. We walk through each with you and help with the ones we handle, so the old ways in are closed on the same day.

Pricing factors

• How many keyways are in the mix. Choosing the dominant brand usually keeps the cost down because fewer locks need replacing. If your favorite lock is the outlier, say the handleset on the front door, we can reverse the plan, although it may mean replacing more hardware.
• Condition of the oldest and cheapest locks. Builder-grade knobs, gate latches and slider cylinders are the usual troublemakers. They may re-pin, but a worn latch will fail again soon. We point out which ones are worth rekeying and which are better replaced, and you decide. Nothing is swapped without your approval.
• Key plan, key count and timing. Extra levels, such as a separate key for the guest house, add some setup, and each extra key cut adds a little too. Decide the plan before the visit and the quote stays firm. Change it midjob and we may need to re-pin.

Every job gets a clear quote before any work starts. Call (951) 903-3193 with the details and we'll tell you what to expect for your situation in Devore.

What not to do

• Making copies from copies at a kiosk. A key duplicated from a worn duplicate drifts from the original cuts, and a few generations later it sticks or fails. Cut all later keys from your stored master, and keep a count of how many exist.
• Skipping the garage side door and the door from the garage into the house. These two are among the most commonly lent out and the most commonly forgotten. If either one stays on the old key, anyone holding that key still has a way into your home.
• Keeping the old keys just in case. They open nothing after the rekey, but a drawer of dead keys confuses everyone later and tempts someone to hand one out. Recycle them, and keep only the new, labeled set and one stored master copy.

Advice before you book

• Tell the people who legitimately need access before the rekey, and hand out their new keys the same day. A mother-in-law who can't get in the next morning is a more common headache than a break-in. Write down who needs what: pet sitter, gardener, grown kids.
• Retire the hide-a-key. Fake rocks, planter bases and doormat spots are the first places a burglar looks. Give a spare to a trusted person, or switch visitors to a keypad code you can change. If you do keep a key outside, lock it in a hardened box.
• Tell your alarm company about the change. Their keyholder and password lists often name people who no longer need access. Update the monitoring contacts, reset the alarm code and remove old users from the panel and app so every list matches the new key plan.
• Use every new key on day one. Try each in its lock from outside with the door closed behind you. A key that sticks now is a fixable problem. One that fails a month later is much harder to diagnose, and we'd rather adjust it while the tools are still out.

Getting to Devore

Devore is about 8 miles from our San Bernardino base, roughly 14 minutes in light traffic via Kendall Drive or Palm Avenue to I-215 North, through the Devore junction onto I-15 North, exit Kenwood Avenue for Devore Heights. When you call, you get an arrival estimate based on where the technician is and the traffic at that moment.

Commercial jobs on busy stretches like I-215 sometimes need a parking plan, especially for storefront doors or roll-up gates. Let us know about loading zones, red curbs or parking structures before we arrive.

About Devore: Cajon Boulevard through Devore is an original stretch of U.S. Route 66, which crossed the Cajon Pass from 1926 until 1979, when Interstate 15 replaced it.

Planning a rekey in Devore?

Call (951) 903-3193 and tell us how many doors you want on the new key and the brand of the locks if you know it. We'll quote the rekey before any work starts.