Keyed Alike Locks in Devore: How They Work and How to Get Them

How this works in Devore

A pin tumbler cylinder holds a column of small pins in each of five or six chambers. The right key lifts every column to the same height, creating a clean line, called the shear line, that lets the plug turn. Keyed alike locks are just cylinders whose pin stacks were built to the same cut depths, which locksmiths call a bitting. Kwikset's KW1 keyway offers seven cut depths; Schlage's SC1 offers ten with finer steps, so the two brands aren't interchangeable, and neither are two different keyways from the same maker. Matching locks means choosing a bitting, then replacing the key pins inside each plug with sizes that fit it. In Devore we do that on site: the plug comes out over a plug follower so the springs and driver pins stay put, we measure and install the new key pins, and the plug goes back in. Whether you supply a working key to copy or let us choose a fresh bitting, the result is the same: one key, several locks, no new hardware.

How we can help in Devore

• Matching existing locks to a key you already carry. Sometimes the best bitting is the one you already hold. If your current key is in good shape, we measure it, build matching pin stacks in the other cylinders and test them. The catch is old copies: any duplicate cut from that key years ago will still open the locks, so we ask who has them.
• Shops, offices and back-of-house doors. Small businesses usually want two tiers: staff keys that open the working doors, and an owner's key that opens everything. That is a master key system in miniature. We'll show you how adding a master level changes the security profile before you commit, then document the keying so future locks join cleanly.
• Smart locks, keypads and backup cylinders. Most keypad and smart deadbolts keep a conventional key cylinder as a backup, and many of those cylinders can be pinned to match your other locks. We check each model's keyway, confirm the cylinder can be re-pinned, and tell you if it can't. Then one key still works everywhere, even when the batteries don't.
• Adding a master key above a keyed alike group. Not every keyed alike set needs a master. A homeowner with two groups can simply carry both keys. Landlords, caretakers and property managers in Devore gain the most, because one master replaces a heavy ring. We design the levels, pin the cylinders and hand you the chart.
• Key cutting, labeling and a key record. For anything high-value, ask about restricted keyways such as Schlage Primus or Medeco, where blanks are controlled and copies need authorization. Keyed alike works with them too. Control costs more per cylinder, but a copy can't be made at a kiosk, which suits rentals and shops with staff turnover.

Local factors in Devore

Older Devore homes carry a lifetime of replaced hardware: a mortise set at the front from the 1950s, a deadbolt added in the nineties, a brass knob at the back. Their keyways rarely match, so the first job is mapping them. We re-pin what shares a keyway to one bitting, swap a cylinder where an old mortise body can take a modern one, and replace the oddballs, keeping original handles wherever we can.

Horse properties collect locks over decades: a barn aisle door, a tack room, a feed room, a trailer compartment and several gates. Keyed alike by group works well, with barn and tack on a worker key and the feed room and medication cabinet on the owner's. Boarders get their own locker locks, keyed different from everyone else, which protects saddles and supplements.

Properties with acreage bring padlocks in volume: gates, barns, equipment sheds and fuel tanks. Keyed alike padlock sets keep the ring short, but a single key for the whole property is a gamble if hired help holds a copy. We suggest one key for outbuildings and a different one for the house, with covered-keyhole padlocks that shrug off dust and irrigation overspray.

Situations this covers

• A host with a short-term rental wants guests to have one key for the front and patio doors, and nothing else. The owner's storage closet and the side-yard gate get a second key that stays with the host and the cleaner. We pin both groups, cut spare guest keys and show the host how to track them between stays.
• The owner of a small retail shop in Devore carries five keys for three doors and a cash room. We key the front, back and stockroom alike, put the office and cash room on a second key, and tag each set with a code. Opening shifts get one key, the owner keeps the second, and a former manager's stockroom key stops working.
• An older couple in a 55-plus community in Devore fumble with a ring of five similar keys. We pin their front, patio and garage locks to a single large-head key and put the storage unit on a separate one. Arthritic hands notice the difference: the key is easier to find, and there are fewer keys on the ring.
• During a remodel near Glen Helen Raceway, a homeowner swaps the back-door lockset for a new one in a different finish. The front deadbolt and garage entry stay as they are. We key the new lock to match the old, pin the garage knob to the same key, and the family keeps carrying the single key they've used for years.

How the visit works

1. Tell us what you have and what you want alike. Before the visit, note which locks still have working keys and which are lost or stuck. Mention anything unusual: a smart lock, a restricted keyway, an old mortise set. We'll ask about the building too, because a duplex and a single-family home are keyed very differently.
2. Confirm you're authorized. Ownership checks protect you more than us. If a former partner or tenant called a locksmith claiming your address, the same check would stop them. We compare your ID to a bill, a lease or a deed, confirm who is authorized, and only then pull the first cylinder.
3. Choose the grouping and the key. If you want to add a lock to the group next year, say so. We note the keyway, the bitting and the key blank so future locks can join. We'll also tell you which of your locks cannot join, because of keyway or construction, before any parts come apart.
4. Re-pin or match each cylinder. We remove each cylinder, release the plug over a plug follower so the springs stay put, and exchange the key pins for the new bitting. A cylinder takes only a few minutes. Locks that can't be re-pinned are flagged, and we replace them with same-brand hardware.
5. Test every key in every lock. A keyed alike job has one pass-fail test: the same key must turn every lock smoothly. We run it a dozen turns per lock, in both directions, and try the spare keys too. Locks that bind get a dry lubricant, a screw tightening or a strike adjustment.
6. Label, cut spares and record the key. We cut the number of spares you want, tag each set with a neutral code and write the bitting and keyway on your key card. Keep the card somewhere safe and apart from your keys. With it, we or any licensed locksmith can match future locks to the group.

How we quote the job

• How many cylinders go on the key. A one-lock job and a twelve-lock job share the same travel and setup, but the twelve-lock job takes much longer at the work tray. Per-cylinder cost often eases as the count rises, because the van is already set up. We explain the structure of the quote on the phone.
• Key count and key type. Keys for a standard five-pin cylinder are straightforward. Keys for six-pin, restricted or sidebar systems need special blanks and sometimes factory authorization, which affects cost and turnaround. If a lock uses one, we say so when you call, so the quote already includes it.
• Hardware condition, access and timing. Stiff, corroded or loose cylinders take longer to rekey than clean ones, and some can't be re-pinned reliably. We assess condition at the door; if replacement is smarter, we say so and quote it separately. Easy access to every door keeps the visit short.

Every job gets a clear quote before any work starts. Call (951) 903-3193 with the details and we'll tell you what to expect for your situation in Devore.

What to do before we arrive

• Count keyholes before you shop. Walk the property and list every lock: deadbolts, knobs, handlesets, padlocks, the gate, the shed and the garage entry. Note the brand stamped on the latch edge or cylinder face. A complete list prevents buying the wrong number of locks and makes any phone quote accurate.
• Use a neutral tag. A key marked with your street address becomes a map for whoever finds it. Tag keys with a code only you understand, such as 'A' for the family set and 'B' for the shared spaces, and keep the legend with your records, not on the ring.
• Buy locks from one brand and one product line when you can. Matching packs share keyways and finishes, and a family of Schlage or Kwikset locks will always join each other. Mixing a Schlage deadbolt with a Kwikset knob looks harmless on the shelf and creates a problem the moment you want one key.
• Match padlock sets by model, not just by brand. Different models from the same maker often use different keyways, so two padlocks can carry the same name and still not share a key. Buy the set as sold, or ask us to match them before you commit to a pile of mismatched ones.

Mistakes to avoid

• Cutting spares anywhere that doesn't check the cuts. A copy made from a worn key inherits its wear, and one slightly off won't throw every lock in the group. Have spares cut from the code or a fresh original, and try each one in every lock.
• Matching new locks to an old key without asking who has copies. The key that opened the house for ten years may also sit in a former roommate's drawer. If copies are unaccounted for, keying alike to that key preserves the exact problem you're trying to avoid.
• Assuming any two locks from the same brand can be keyed alike. Keyways vary within a brand, and Kwikset SmartKey and conventional Kwikset cylinders don't share keys. Check the keyway first, or have us identify it, before you buy a second lock expecting it to join the first.

Getting to Devore

Devore is about 8 miles from our San Bernardino base, roughly 14 minutes in light traffic via Kendall Drive or Palm Avenue to I-215 North, through the Devore junction onto I-15 North, exit Kenwood Avenue for Devore Heights. When you call, you get an arrival estimate based on where the technician is and the traffic at that moment.

Traffic matters more than mileage. We check conditions on Palm Avenue and its connecting routes before quoting you a time, and we don't pretend a long drive through heavy congestion is a short one.

About Devore: The Devore Water Company received water rights in 1904 and 1911 and still operates as the community's local water producer.

Planning a rekey in Devore?

Call (951) 903-3193 and tell us how many doors you want on the new key and the brand of the locks if you know it. We'll quote the rekey before any work starts.