How to Rekey All House Locks in Rialto in One Visit

What to expect in Rialto

All means more than most people expect. On a typical single-family home, the list starts with the front door, which often has two cylinders: a deadbolt plus a knob or lever, or a handleset whose key lives in the deadbolt. Add the back door, the door from the garage into the house, and the garage side door, each commonly with a knob and a deadbolt. Then come the outliers: a steel security screen with its own cylinder, French doors with a euro cylinder, a slider with a small keyed latch, a side gate with a keyed deadbolt or rim lock, an RV gate padlock, a shed, a casita or a keyed home office. Some homes also have keyed window locks or a manual T-handle on an older overhead garage door. Mailboxes are separate: they're small cam locks with their own keys, and cluster boxes follow post office or HOA rules. When you set out to rekey all house locks, the first job is writing that list down, because a cylinder that never makes the list never gets re-pinned.

How we can help in Rialto

• Whole-property lock inventory. Every whole-house job starts with a count. We walk the exterior with you, then the garage and any outbuildings, and list each keyed cylinder by location and brand. Homeowners are routinely surprised by the number. That list becomes the quote, the work order and, at the end, your record of which key opens what.
• Re-pinning every exterior door. For a whole house, we pin every cylinder from a single key code, so all the locks on the plan accept exactly the same key. The old pins go in the trash rather than back into stock. While each plug is out, we clean the cylinder and replace weak springs, so locks often feel better afterward.
• Bringing mixed brands onto one key. Standardizing on one brand pays off later too. Spare parts, future rekeys and added locks are simpler when the house shares a single keyway. If you're planning to replace a few worn locks anyway, a whole-house rekey is the natural moment to bring everything onto one brand and one key in a single trip.
• Separate keys and simple master keying. Not every lock has to share a key. During a whole-house rekey we can put a home office, a storage room, a casita or a detached shop on its own key while the main doors share another. Each extra key is a small addition to the job, and it's far cheaper to plan now than to re-pin later.
• Key cutting, key count and a key record. Keep one key cut from code as your master copy and make future duplicates from it, not from a worn copy. If you'd like restricted keys that can't be copied at a kiosk, ask about upgrading the main entry cylinders. That's a different job from a standard rekey, so we'll explain the options separately.

What's different about Rialto

Inland summer heat in Rialto bakes door hardware. Finishes fade, latches swell and stick, and cylinders collect fine dust that makes keys drag. Re-pinning a lock is a good moment to clean it and replace tired springs. During a whole-house rekey we note which locks feel gritty or stiff, because heat-stressed hardware often fails soon after. West-facing doors and garage entries tend to be the worst, and we can quote replacements alongside the rekey.

Houses built before 1980 in Rialto often show their age at the keyhole: brass knobs from the 1950s, a deadbolt added in the 1980s, a mortise lock on the front door and a different brand in each room. A whole-house rekey here begins with an honest look at which pieces still work. Original mortise sets can often be rebuilt and re-pinned, while worn knobs and loose latches are better replaced. We aim to keep the character and still end up on one key.

Production homes in newer Rialto neighborhoods arrive with builder-grade locks, usually one brand on every door and keyed alike. But the construction crew, the sales office and the prior buyer's contractors may all have held keys. Rekeying all house locks resets that count. Builder-grade hardware generally re-pins well and cooperates. Check your builder paperwork before swapping anything, and keep the lock model numbers on your new key record.

Example situations

• A homeowner installs a Schlage Encode on the front door and considers the house secured. The back door, garage entry and side gate still use the old key that a former contractor copied. We rekey those to match the Encode's backup cylinder, so a single physical key opens everything, and we show her how to prune old app users.
• On a half-acre lot off Merrill Avenue, a homeowner has a workshop, a detached garage, an RV gate, a pool equipment shed and seven padlocks, with a few keys scattered among them. We rekey or replace each lock, key the pool shed apart from the house so the pool service never needs a house key, and tag every padlock key by number, not by name.
• A remodel crew held a house key for three months, along with the garage keypad code. The work is finished and the family is pleased, but they would like the key count reset. We rekey the exterior doors and the garage entry, help them change the keypad code, and walk the property to be sure nothing else, like a side gate or lockbox, still works for the crew.
• A homeowner uses a kit on the front and back doors, then learns months later that the garage side door still opens with the old key. Nobody wrote that door down. A whole-house count prevents exactly this gap. We list every keyhole first, including screens and the knob under the deadbolt, and the job isn't finished until each one has been tried with the new key.

How the visit works

1. Count the keyholes before we arrive. Walk your property before you call and note every keyed lock, including the knob beneath the deadbolt, security screens and gates. Photos of each help. A short look now saves surprises later, and it tells us whether one visit can cover everything.
2. Gather every key and show you belong at the address. We confirm you own or lawfully occupy the home before touching a cylinder. Photo ID plus a utility bill, mortgage statement, lease or similar proof works. For an inherited house, we may ask to see the paperwork showing you can act for the estate.
3. Agree on the key plan before any pins come out. Choose the structure first: one key for the whole house, a second for the outbuilding, perhaps a master. We sketch it door by door and write down how many keys of each you want. Changing the plan afterward means pulling cylinders twice.
4. Rekey one door at a time and test as we go. While a cylinder is out, we clean it and replace tired springs. Locks that drag, stick or spin loosely go on the list. You'll hear what we find as we go, not only at the end, and you can approve fixes door by door.
5. Cut, count and test every key. New keys are cut from the same code used to pin the cylinders. We try each key in every lock it should open, and in locks it shouldn't, to confirm the plan worked and the old keys are dead. Then you count them with us.
6. Reset what rekeying doesn't touch. Rekeying changes metal keys only. Garage remotes, keypad codes, smart lock users, alarm codes and any lockbox are separate. We walk through each with you and help with the ones we handle, so the old ways in are closed on the same day.

Pricing factors

• Condition of the oldest and cheapest locks. Builder-grade knobs, gate latches and slider cylinders are the usual troublemakers. They may re-pin, but a worn latch will fail again soon. We point out which ones are worth rekeying and which are better replaced, and you decide. Nothing is swapped without your approval.
• Specialty, high-security and smart-lock cylinders. Smart locks add a step: removing the unit, re-pinning the backup cylinder, reinstalling it and testing the motor. Retrofit models like August and Level add less than full replacements like Schlage Encode or Kwikset Halo. We tell you what your model needs.
• Key plan, key count and timing. Hours and distance play a role. We work every day from 6:30 a.m. to 11:30 p.m., weekends included. A planned daytime slot is easier to schedule than an urgent evening call. The drive from our San Bernardino base counts too, so share your address and any gate code when you book.

Every job gets a clear quote before any work starts. Call (951) 903-3193 with the details and we'll tell you what to expect for your situation in Rialto.

Practical tips before you call

• Plan around pets and children. We move between yard and house repeatedly, opening gates and doors. Secure dogs indoors or in a bedroom before we arrive, and let us know about any gate that has to stay latched. Kids shouldn't be left with a spare key on a necklace.
• Draw a rough floor plan and mark every keyed lock on it before we arrive. Include the ones you've never used, and check both faces of each door, since a keyhole on only one side still counts. That quick sketch becomes the backbone of your key record afterward.
• Collect keys before the visit. Gather every key from drawers, hooks, cars, kids' backpacks and the hide-a-key spot. Keys you can't match to a lock are still worth bringing, because we can try them, tell you what they open, and let you recycle the rest.
• Retire the hide-a-key. Fake rocks, planter bases and doormat spots are the first places a burglar looks. Give a spare to a trusted person, or switch visitors to a keypad code you can change. If you do keep a key outside, lock it in a hardened box.

What not to do

• Forgetting the codes, fobs and hidden spares. New metal keys don't change a garage keypad, a smart lock user list, a lockbox left from a sale or a spare in the planter. Walk the list of other ways in, and reset each one the same day.
• Assuming one brand's key will fit another. Kwikset and Schlage use different keyways, so a Kwikset cylinder can't be pinned to a Schlage key. Buying a few cheap replacement locks without checking the keyway just adds another key to the ring.
• Spending a rekey on a failing lock. A knob with a worn latch or a deadbolt chewed up by a past break-in will keep failing no matter how new the key is. Replace the weak hardware and key it to match, instead of nursing it along.

Getting to Rialto

Rialto is about 10 miles from our San Bernardino base, roughly 17 minutes in light traffic via Palm Avenue to I-215 South. When you call, you get an arrival estimate based on where the technician is and the traffic at that moment.

If you're close to I-15, tell us which exit or cross street you're nearest. It trims the last mile and keeps the van from circling a block that looks right on the map but isn't.

About Rialto: The Pacific Electric's San Bernardino Line reached Rialto in 1914 with a junction at Riverside Avenue, and the old depot there now houses Cuca's Restaurant.

Planning a rekey in Rialto?

Call (951) 903-3193 and tell us how many doors you want on the new key and the brand of the locks if you know it. We'll quote the rekey before any work starts.