Same Key for All House Locks in Ontario

What to expect in Ontario

One key for everything is convenient, and it also concentrates risk. If that key goes missing somewhere it could be tied to your address, every door it fits is exposed until you rekey again. That's not a reason to avoid it, but it shapes a few decisions. Keep the number of copies small and know who holds each one. Don't hang the house key on the same ring as a garage remote and a registration card. Think about whether anyone who only needs part of the property, such as a pool service, a dog walker or a tenant in a converted garage, should get a separate key instead. For households that need that kind of split, a simple master key arrangement gives each zone its own key while one key still opens everything, though it costs more to set up and isn't possible on every lock. Kwikset SmartKey cylinders, for instance, can't be master keyed. For most families in Ontario, plain one-key keying plus sensible key control is the right balance, and we'll tell you honestly if your situation calls for something more.

What we can do on-site

• Security screen door deadbolts. Security screen doors in Ontario take a beating from afternoon sun, slamming and dust. Before we rekey the lock to your house key, we check that the bolt throws fully into the frame and that the cylinder isn't packed with grit. A gritty cylinder gets cleaned and treated with a dry lubricant so the new key turns easily.
• Garage entry and side door locks. Garages are often where mismatched keys hide: a knob-only lock on the house-to-garage door, a builder-grade knob on the side door, maybe a padlock on a storage cabinet. We bring the passage doors onto your house key and recommend adding a deadbolt where there's only a knob. The overhead door handle usually stays separate.
• Cutting and testing your new keys. Your new keys are cut by code on a machine in the van, not traced from an old worn key, so every copy matches the pinning exactly. We test each one in every lock before handing it over, turning the deadbolt with the door closed against the strike, where a marginal key tends to show itself.
• Fixing worn or sticky locks along the way. There's no point matching a lock that fights its key. While each cylinder is apart, we check pins for wear, springs for fatigue and the plug for grit. Worn parts get replaced, the cylinder gets a dry lubricant, and a lock that was sticky before turns cleanly with the new key.
• Two-key and master key options. If you rent out part of your Ontario property, the tenant's door must not open with your everyday house key. We set the rental unit on its own key and talk you through whether master keying makes sense for owner access, keeping in mind that tenants are entitled to proper notice before a landlord enters.

How Ontario shapes the job

Inland summer heat expands metal doors and frames, which can make deadbolts drag and keys stiff. With one key used at every door, that stress concentrates on a single key. When we key a Ontario home alike, we check strikes on sun-facing doors, use a dry lubricant and suggest keeping a spare cut by code, since a worn or bent key affects every lock at once.

Newer tract homes usually arrive with one lock brand on every door, often already keyed alike by the builder. That's convenient, but builder keys passed through framing crews, inspectors, cleaners and model-home staff. If you're in a newer Ontario subdivision, have the matching set rekeyed to a fresh combination: you keep one key for everything, and you know exactly who holds a copy.

Apartment renters can rarely change locks without permission, and many complexes rekey units themselves between tenants. If your Ontario apartment has a deadbolt and knob on different keys, ask management to key them alike at the next rekey. If they approve a private locksmith, get it in writing and give the office a copy of the new key, since leases usually require one.

Example situations

• Picture a grandmother who's started having trouble telling her keys apart, especially at dusk. Her family asks for one key across the house. We'd rekey the front, back and garage doors to match, cut a key with a large rubber head that's easy to grip, and check that each deadbolt turns with light pressure, adjusting a strike that had been forcing her to shove the door.
• For example, a house off Archibald Avenue has a steel security screen door whose deadbolt uses a different key from the wood door behind it, so every trip inside takes two keys. After confirming the screen door's cylinder is a standard KW1 type, we'd rekey it and the entry deadbolt to the same new key, then adjust the screen door's strike, which had been catching on every close.
• A typical call: the front door has a Schlage deadbolt and handleset, the back door a Kwikset knob and deadbolt left from an old repair, and the garage entry a Schlage knob. The owner wants one key. Since three of the five cylinders are already Schlage, we'd rekey those, replace the two Kwikset pieces with Schlage hardware, and set everything to one fresh combination.
• Say a homeowner installed a Schlage Encode on the front door last year and still carries an old Kwikset key for the back door and garage. Because the Encode takes a Schlage cylinder, the fix would be swapping the two Kwikset locks for Schlage hardware and keying them, plus the Encode's backup cylinder, to one key, so a dead battery never sends anyone hunting for a different key.

From your call to the finished job

1. Send photos and a count of your locks. When you call (951) 903-3193, tell us how many doors and gates you want on the one key, and text photos of each lock face if you can. The brand logo and keyhole shape tell us what pins, blanks and replacement hardware to bring, so we can finish in one visit.
2. Gather a working key for each lock. Lay your current keys out on a table and try each door, noting which key opens what. Put a strip of tape on each one. That short exercise saves time during the visit and tells us right away whether a lock is already struggling.
3. Verify ownership and confirm the plan. On arrival we verify that you own or live in the home, usually with ID and something showing the address. Then we walk the doors together, mark each lock as rekey, replace or leave out, and confirm the price before any cylinder comes off a door.
4. Pick the new key combination. The new key is cut by code first and becomes the pattern for every cylinder. Starting from a fresh, code-cut key avoids inheriting wear from an old copy, which matters because every lock in the house will be pinned to it.
5. Rekey and reinstall each cylinder. Knobs, levers, deadbolts and handlesets each come apart differently, and smart locks need their interior units removed and reconnected. We work carefully around finishes, keep track of every small part, and lubricate each cylinder lightly before reassembly.
6. Test every door and hand over the keys. Before we leave, you try the key yourself at every door. If anything feels stiff, we fix it then and there. We note the brand and keyway on your invoice so future locks can be bought to match, and we take the old pins away with us.

What affects the cost

• Smart lock and high-security cylinders. High-security cylinders from Medeco, Mul-T-Lock or similar makers use patented keys and special pins, so keying them alike with the rest of the house means either fitting high-security cylinders on every door or leaving those doors on their own key. Both are possible; the first costs considerably more.
• Missing keys and stuck locks. A working key for each lock keeps the job simple. A lock with no key has to be opened first, by picking or decoding, before it can be rekeyed. That's usually still cheaper than replacing it, but it adds labor, so let us know in advance which locks have no key.
• Timing, travel and combined work. We're a mobile service based in San Bernardino, so the drive to your property is part of the visit. Scheduling the rekey during a planned appointment and having keys ready keeps time on-site down. You get a price before we start and an honest ETA when you call.

Every job gets a clear quote before any work starts. Call (951) 903-3193 with the details and we'll tell you what to expect for your situation in Ontario.

What not to do

• Duplicating an old, worn key to make copies for the whole family. Each copy inherits the wear, plus a little more from the copying process. Rekeying to a fresh code-cut key is what gives every door a crisp, reliable match that lasts.
• Buying a new lock combo pack and assuming it'll match the locks already on the house. Factory packs are keyed alike only within the box, or to other boxes printed with the same keying code. Unless the new lock gets rekeyed to your existing combination, you've just added another key to the ring instead of removing one.
• Spraying oil into stiff cylinders right before the rekey. Oily residue holds dust and grit, which makes pins sluggish and can hide wear we'd otherwise spot. If a lock is sticking, leave it alone and mention it; we'll clean it properly during the visit.

Advice before you book

• If you have a keypad or smart lock, keep its backup key on your main ring rather than in a drawer. Once its cylinder is keyed to match the house, the key you carry every day also solves a dead-battery lockout, which happens more often than people expect.
• Plan who gets copies before the visit. Write down each person who genuinely needs a key, add one spare, and stop there. With one key opening every door, a short list matters more than it did when each key opened only one lock.
• Use a dry lubricant made for locks, such as a graphite or PTFE product, once or twice a year. Oil-based sprays attract dust and gum up pins over time, especially in hot, dusty inland summers, and a sticky cylinder is the first thing that makes a one-key setup feel unreliable.
• Before calling, photograph the outside face of every lock you want included. A clear picture of the logo and keyhole tells us the brand and keyway, which decides whether a lock can simply be rekeyed or needs a matching cylinder. Text the photos ahead of the visit so the right parts are already in the van.

Getting to Ontario

Ontario is about 25 miles from our San Bernardino base, roughly 33 minutes in light traffic via I-215 North to the I-15 junction at Devore. When you call, you get an arrival estimate based on where the technician is and the traffic at that moment.

Traffic matters more than mileage. We check conditions on Mission Boulevard and its connecting routes before quoting you a time, and we don't pretend a long drive through heavy congestion is a short one.

About Ontario: The city opened Ontario Municipal Airport in 1929, and local control returned in November 2016 when the Ontario International Airport Authority took over from Los Angeles World Airports.

Planning a rekey in Ontario?

Call (951) 903-3193 and tell us how many doors you want on the new key and the brand of the locks if you know it. We'll quote the rekey before any work starts.