Rekey All House Locks in Ontario, With Nothing Missed

What to expect in Ontario

Two things decide how smoothly a whole-house rekey goes: keyways and condition. A keyway is the shape of the slot and the matching profile of the key. Every Kwikset lock on a standard KW1 keyway can be pinned to the same key, and so can every Schlage lock on SC1, but a Kwikset cylinder can't be pinned to a Schlage key or the reverse. In a mixed house, getting to one key means picking the brand you have most of, then replacing the odd cylinders or locks with hardware in that keyway. Condition matters just as much. A knob that wobbles, a latch that sticks or a deadbolt chewed up by a past break-in isn't worth re-pinning; it should be replaced and keyed to match. Kwikset SmartKey cylinders, smart locks and high-security brands such as Medeco each add their own wrinkles. We note every lock's brand and condition on the walk-through, so the quote separates simple re-pins from the locks that need parts.

Work included on a typical visit

• Re-pinning every exterior door. The core of the job is re-pinning each exterior door cylinder to the new key: deadbolts, knobs, levers and handlesets on the front, back and side entries. We work one door at a time, test it locked and unlocked from both sides, and only then open up the next. Your house is never left with several doors apart.
• Garage access points. Older overhead doors sometimes still have a keyed handle in the center panel, often seized from years of disuse. We can usually re-pin or replace that cylinder, or remove its function if the door runs on an opener and you'd rather not have an extra keyhole. Either way, no old key opens the garage afterward.
• Outbuildings, casitas and padlocks. Padlocks are hit or miss. Some commercial-grade padlocks have rekeyable cylinders, and some are sold in common residential keyways. Budget padlocks aren't rekeyable at all, and the practical fix is a matched set of new keyed-alike padlocks. We'll tell you which of yours can be re-pinned before you pay for anything.
• Separate keys and simple master keying. Not every lock has to share a key. During a whole-house rekey we can put a home office, a storage room, a casita or a detached shop on its own key while the main doors share another. Each extra key is a small addition to the job, and it's far cheaper to plan now than to re-pin later.
• Smart locks, keypads and lockboxes. Keypads, lockboxes and hidden spares are the access points people forget once the keys are changed. A lockbox left from a sale, a code shared with a former cleaner, a magnetic key holder under the bumper of a car you sold: we ask about each one, because a whole-house rekey only works if the side doors are closed too.

Local factors in Ontario

Houses built before 1980 in Ontario often show their age at the keyhole: brass knobs from the 1950s, a deadbolt added in the 1980s, a mortise lock on the front door and a different brand in each room. A whole-house rekey here begins with an honest look at which pieces still work. Original mortise sets can often be rebuilt and re-pinned, while worn knobs and loose latches are better replaced. We aim to keep the character and still end up on one key.

Inland summer heat in Ontario bakes door hardware. Finishes fade, latches swell and stick, and cylinders collect fine dust that makes keys drag. Re-pinning a lock is a good moment to clean it and replace tired springs. During a whole-house rekey we note which locks feel gritty or stiff, because heat-stressed hardware often fails soon after. West-facing doors and garage entries tend to be the worst, and we can quote replacements alongside the rekey.

Production homes in newer Ontario neighborhoods arrive with builder-grade locks, usually one brand on every door and keyed alike. But the construction crew, the sales office and the prior buyer's contractors may all have held keys. Rekeying all house locks resets that count. Builder-grade hardware generally re-pins well and cooperates. Check your builder paperwork before swapping anything, and keep the lock model numbers on your new key record.

Common situations

• A recently flipped house near Chaffey High School has Schlage hardware on the front, Kwikset on the back, an unbranded deadbolt on the garage door and a mystery brand on the slider. The owner wants one key. We pin the keyway with the most locks, replace the two outliers with matching hardware and cut three keys. Most of the original hardware stays, so the job is smaller than a full replacement.
• A homeowner converts a detached garage into a rental unit with its own door and a small side gate. She wants her key to open everything, while the tenant's key opens only the unit and the gate. We rekey the entire property with a two-level setup, so the tenant's key can never reach the main house, and we record which cylinders carry the extra pins.
• A burglar finds the spare key hidden under a flowerpot and walks in through the front door. After the police report, the family decides rekeying one door isn't enough, since the same key opened the back door and the garage entry. We re-pin every cylinder, retire the hiding spot and suggest a keypad entry for visitors.
• On a half-acre lot off Mission Boulevard, a homeowner has a workshop, a detached garage, an RV gate, a pool equipment shed and seven padlocks, with a few keys scattered among them. We rekey or replace each lock, key the pool shed apart from the house so the pool service never needs a house key, and tag every padlock key by number, not by name.

How the visit works

1. Count the keyholes before we arrive. Walk your property before you call and note every keyed lock, including the knob beneath the deadbolt, security screens and gates. Photos of each help. A short look now saves surprises later, and it tells us whether one visit can cover everything.
2. Gather every key and show you belong at the address. No working key for a few locks? Say so. We can still rekey them after verifying who you are, though locks that have to be opened or removed first take longer. Give us the history and we'll bring the right tools.
3. Agree on the key plan before any pins come out. This is the moment to decide about odd locks. A rusted gate latch, a worn knob or a slider with no cylinder may be replaced, left off the plan or handled separately. We explain your options for each and quote them before work begins.
4. Rekey one door at a time and test as we go. We pull each cylinder, empty the old pins, rebuild it to the new code and reinstall it. Then we cycle it from both sides before moving on, so the house is never left with several doors half-finished while we work.
5. Cut, count and test every key. We'll hand you a short list showing which door takes which key. Keep it private, since it shows how your keys work. If you ever add a lock, the list tells you which keyway and key to match.
6. Reset what rekeying doesn't touch. Rekeying changes metal keys only. Garage remotes, keypad codes, smart lock users, alarm codes and any lockbox are separate. We walk through each with you and help with the ones we handle, so the old ways in are closed on the same day.

Pricing factors

• Condition of the oldest and cheapest locks. Sun and sprinkler overspray age exterior hardware faster than interior hardware. Expect the side gate and back door to be the hardest. A bit of cleaning and fresh springs revives many locks, while others have simply reached the end. We'll tell you which is which.
• Specialty, high-security and smart-lock cylinders. Some high-security systems restrict who may cut keys and which parts can be sold. If you have one, expect extra verification and sometimes a wait for parts. We tell you before you commit, so you aren't caught off guard. Plan some extra time for it.
• Key plan, key count and timing. Hours and distance play a role. We work every day from 6:30 a.m. to 11:30 p.m., weekends included. A planned daytime slot is easier to schedule than an urgent evening call. The drive from our San Bernardino base counts too, so share your address and any gate code when you book.

Every job gets a clear quote before any work starts. Call (951) 903-3193 with the details and we'll tell you what to expect for your situation in Ontario.

Practical tips before you call

• Tell your alarm company about the change. Their keyholder and password lists often name people who no longer need access. Update the monitoring contacts, reset the alarm code and remove old users from the panel and app so every list matches the new key plan.
• Retire the hide-a-key. Fake rocks, planter bases and doormat spots are the first places a burglar looks. Give a spare to a trusted person, or switch visitors to a keypad code you can change. If you do keep a key outside, lock it in a hardened box.
• Collect keys before the visit. Gather every key from drawers, hooks, cars, kids' backpacks and the hide-a-key spot. Keys you can't match to a lock are still worth bringing, because we can try them, tell you what they open, and let you recycle the rest.
• Tell the people who legitimately need access before the rekey, and hand out their new keys the same day. A mother-in-law who can't get in the next morning is a more common headache than a break-in. Write down who needs what: pet sitter, gardener, grown kids.

What not to do

• Keeping the old keys just in case. They open nothing after the rekey, but a drawer of dead keys confuses everyone later and tempts someone to hand one out. Recycle them, and keep only the new, labeled set and one stored master copy.
• Rekeying everything to one key before deciding what shouldn't share it. A casita, workshop or rented room often deserves its own key. Settling the structure first costs nothing, while re-pinning cylinders a second time costs time and parts. Decide first, then pin once.
• Spending a rekey on a failing lock. A knob with a worn latch or a deadbolt chewed up by a past break-in will keep failing no matter how new the key is. Replace the weak hardware and key it to match, instead of nursing it along.

Getting to Ontario

Ontario is about 25 miles from our San Bernardino base, roughly 33 minutes in light traffic via I-215 North to the I-15 junction at Devore. When you call, you get an arrival estimate based on where the technician is and the traffic at that moment.

We plan the drive the way a delivery route gets planned: freeway first, Ontario Ranch Road where it makes sense, then the side streets you describe. A landmark or the color of your building helps the technician spot you.

About Ontario: Canadian-born brothers George and William Chaffey founded Ontario in 1882 as the Ontario Model Colony, naming it after their home province, and the city incorporated on December 10, 1891.

Planning a rekey in Ontario?

Call (951) 903-3193 and tell us how many doors you want on the new key and the brand of the locks if you know it. We'll quote the rekey before any work starts.