Ontario Lock Rekey: New Keys Pinned Into Your Existing Cylinders

How this works in Ontario

A lock rekey decides which key works; it doesn't automatically make a cylinder tougher. Still, the plug is already out on the bench, which makes it the cheapest moment to add resistance. Standard driver pins are plain little cylinders that set cleanly when a pick lifts them. Spool drivers, shaped like a thread spool, and serrated drivers, ringed with fine grooves, catch at the shear line and feed a picker false feedback. They're made for the common residential and commercial keyways, and they don't change how your key feels. Pulling master pins that no longer serve a purpose is another quiet improvement, since each one adds an extra height at which the plug will turn. Bump keys, which exploit plain pin stacks, also become less reliable against security drivers. There are limits, though. A builder-grade knob with a short latch, a strike held by short screws or a cylinder that pulls out under force needs hardware changes, not pins. In Ontario, we often pair a rekey with three-inch strike screws and a reinforced strike plate, and for real pick and drill resistance we point people toward restricted, UL 437-listed cylinders rather than overselling what new pins can do.

Work included on a typical visit

• Master pin removal or rebuilding. When a property changes management or an old master key goes missing, we remove master pins so each cylinder answers only to its own change key, or we re-pin the whole system to a new master. Fewer shear points also means a tighter cylinder that's harder to pick or bump open.
• Interchangeable core swaps. Small format and large format interchangeable cores come out with a control key, which makes rekeying quick: we pin a new core on the bench, pull the old one and slide the new one in. If the control key is lost, the job takes longer because the existing core has to be picked or drilled out first.
• Keying locks to a key you already carry. Keying to an existing key is common when you add a deadbolt or move a garage-entry lock. We confirm brand and keyway compatibility, since a Kwikset key will never operate a Schlage cylinder without changing the cylinder itself, then pin each lock and test it with your original key on the spot.
• Key decoding and code cutting. We read cut depths with a key gauge or caliper and translate them into a bitting code, then cut new keys by code on a machine rather than tracing a worn original. Code-cut keys run smoother in fresh pins and make every future duplicate predictable, no matter which shop eventually cuts it.
• Padlocks, cam locks and gate cylinders. Side gates, storage sheds and pool equipment enclosures collect dust and rust that stiffen cylinders. When we rekey these, we flush out grit, replace corroded springs and lubricate with a dry product so the lock keeps working through summer heat, wind and the occasional sprinkler soaking.

How Ontario shapes the job

Newer tract homes frequently come with Kwikset SmartKey hardware, and before you got the keys they passed through builders, subcontractors, cleaners and the sales office. Resetting every cylinder to a key only you control is the first job after closing. We complete SmartKey resets with your working key, check the garage-entry and side doors that buyers tend to overlook, and explain your options if a few doors came with a different brand.

Storefronts usually depend on a narrow-stile Adams Rite-style deadlock, a rear exit device and perhaps an office or stockroom lock. After an employee leaves, rekeying those few cylinders is fast and doesn't require new hardware or glass-door work. We reinstall each storefront cylinder with the correct cam so the hookbolt throws fully, and we can schedule early in the morning, before the first customer walks in.

If you leave before sunrise and get home after dark, scheduling matters as much as the lock work. We start at 6:30 a.m. every day and work into the evening, so a lock rekey can happen before your commute or after it. If you can't be there, an adult you authorize can meet us with documentation, and the new keys go only to that person.

Common situations

An owner of a 1990s Creekside house has a Schlage front deadbolt, a Kwikset back deadbolt and a Kwikset garage entry lock. She wants one key for all three. Because the two brands use different keyways, we replace the odd one out with a matching Kwikset deadbolt, then pin all the cylinders to one key. Each one is tested with the new key and the old keys are confirmed dead, so she carries a single key.

• Suppose a daughter is handling her late father's house near Graber Olive House as executor, and nobody can find keys to the back door or the detached workshop. She brings her ID and the letters testamentary from probate. We shim the back-door deadbolt plug, pick the workshop lock, and re-pin both to the front-door key she already carries, so the family ends up with a single key and a known count.
• For example, a couple closes escrow on a stucco house in Ontario Ranch and receives three different keys from the seller, none of which runs the side door. We decode each one and find two Schlage deadbolts and three Kwikset knobs. They choose to keep both brands, so we pin the Schlage pieces to one new key and the Kwikset pieces to another, then cut matched pairs for each of them.
• Say a homeowner tries to reset a Kwikset SmartKey deadbolt with the tool, gets interrupted halfway, and now neither the old key nor the new one turns. That's a familiar SmartKey failure. We work the cylinder back into a known state, complete the reset with a properly cut key, then check the remaining SmartKey locks in the house so all of them end up sharing the same key.

Step by step with Julian's Locksmith

1. Count cylinders and confirm authorization. Before we arrive, we ask how many keyed cylinders you have, the brands, and whether any are master keyed or high-security. At the door we confirm photo ID and proof that you live at or own the property, or written authorization from the owner or manager.
2. Choose the new bitting. This is also when you decide on structure. Should the garage-entry and front door share a key? Does the pool gate or a casita get its own? We sketch the plan with you, assign a bitting to each group and confirm keyways so the plan is buildable before parts come out.
3. Remove each cylinder. Removal depends on the hardware: thumbturn screws on deadbolts, handle catches on many knobs and levers, set screws on mortise locks, back-plate screws on rim cylinders and a control key for interchangeable cores. Each door's parts stay together so the trim goes back exactly as it came off.
4. Re-pin at the shear line. This is the heart of a lock rekey. Each pin stack gets a new bottom pin matched to the new cut depth, and master pins are added or removed as the chart calls for. We inspect chambers and springs while the plug is out and replace anything worn.
5. Reassemble and test on the door. The plug goes back in behind the follower, the retaining clip or cam is reinstalled, and the cylinder is tried on the bench with the new key and the old one. Then it returns to the door, where we test it locked, unlocked and with the door closed against the strike.
6. Cut keys and leave a record. You get exactly the number of keys you request, each run across a deburring wheel so no sharp edge scrapes the pins later. Rental owners usually want an extra owner key with a label; offices often like key-tag colors per department. The count is written on the invoice so it's on paper.

Pricing factors

• Brand and cylinder type. Less common hardware adds time for a reason. We may need a manufacturer-specific cylinder retainer, a different pin kit or a cam we don't usually stock. Decorative handlesets and imported European profile cylinders fall into that group. When we know the brand ahead of time, we bring the right parts and keep the job to one trip.
• Cylinder condition. You can get a rough read yourself. If the key wobbles up and down in the keyway, turns only with pressure, or the cylinder face is pitted and green, expect extra parts. A spring or two adds very little; a worn-out cylinder costs more, and we'll show you the wear rather than just naming a figure.
• Access and missing keys. A ring of unlabeled keys is better than nothing, though sorting it takes some time. We try each key in each lock to find which still operate, and even a worn key that turns only with jiggling may be enough to get the cylinder out cleanly. Bring every key you have, including the ones you think are useless.

Every job gets a clear quote before any work starts. Call (951) 903-3193 with the details and we'll tell you what to expect for your situation in Ontario.

Practical tips before you call

• Ask about security drivers. During a rekey, spool or serrated driver pins can often replace plain ones where the manufacturer's parts allow, making the cylinder noticeably harder to pick without changing how your key feels in the lock. It costs little extra while the plug is already out.
• Write down how many keys exist after a rekey and who holds each one. Knowing the count is the whole point of rekeying. For a business in Ontario, a simple sign-out sheet keeps that number accurate through staff changes and promotions.
• Check the keyway before planning one key for everything. Look at the brand stamped on each lock face or on your keys. Kwikset and Schlage keyways are different shapes, so mixing brands means either carrying two keys or replacing a cylinder or lock.
• Store the bitting code somewhere safe, like a sealed envelope with your home documents. With that code, a locksmith can cut working keys even if every physical key is lost, without pulling a lock apart or decoding a cylinder first.

Common errors that cost time and money

• Ignoring an old master key system. If a previous owner or manager master keyed the property, a rekey that leaves the master pins in place still lets the old master key work. Ask for the master pins to be removed or the system rebuilt.
• Reinstalling the tailpiece or cam turned the wrong way. On a deadbolt, a tailpiece rotated a quarter turn can leave the bolt half-thrown or the thumbturn pointing sideways; on a storefront, a misaligned cam stops the hookbolt from seating. Mark the orientation before anything comes apart.
• Forgetting the digital side. Rekeying the override cylinder on a keypad or smart lock stops old keys, but an ex-roommate's PIN, a past guest code or a shared app login still opens the door. Delete old users and change the master code on the same day the cylinder gets re-pinned.

Reaching Ontario

Ontario is about 25 miles from our San Bernardino base, roughly 33 minutes in light traffic via I-215 North to the I-15 junction at Devore. When you call, you get an arrival estimate based on where the technician is and the traffic at that moment.

Homes and businesses just off Archibald Avenue are routine stops for us. Give the suite or unit number and any gate instructions, and say whether the van can park out front or should pull into a side lot.

About Ontario: Guasti began in 1904 as the company village of Secondo Guasti's Italian Vineyard Company, and its San Secondo d'Asti Church, completed in 1926, still holds services.

Planning a rekey in Ontario?

Call (951) 903-3193 and tell us how many doors you want on the new key and the brand of the locks if you know it. We'll quote the rekey before any work starts.