Home Lock Rekey in Ontario

What to know first in Ontario

A lived-in house usually has more keyed cylinders than people expect, and a home lock rekey is only as good as its coverage. Start at the front: a handleset or knob plus a deadbolt is two cylinders, not one. The door from the garage into the house often has its own knob and deadbolt, and it's the lock people forget most, even though a stolen garage remote leads straight to it. Back doors, French doors and side doors each add one or two more. Sliding patio doors vary: many have no exterior cylinder at all, while others use a small keyed mortise cylinder that can be re-pinned like any other. Then there's everything outside the walls, such as side-gate padlocks or keyed latches, a detached garage or workshop, a casita or ADU, and sometimes a keyed lever on an interior office or a closet holding firearms or documents. Smart locks add hidden backup cylinders. We walk the property with you, count every keyhole, note the brand and keyway on each, and agree on which ones belong in the rekey before we open a single cylinder.

How we can help in Ontario

• Front door deadbolt and handleset rekeying. Your front entry usually carries two cylinders, one in the deadbolt and one in the handleset or knob. We re-pin both to the same new key so you aren't juggling two. On decorative handlesets from Schlage, Kwikset or Baldwin, we pull the cylinder without scratching the finish and reassemble the trim exactly as it was.
• Back, French and patio door cylinders. Rear entries vary more than front doors. French doors often have one active leaf with a keyed handleset and an inactive leaf held by flush bolts, so only one cylinder needs re-pinning. Sliding patio doors may have no outside keyhole at all, or a small keyed mortise cylinder that we can rekey to match the rest of the house.
• Smart lock and keypad backup cylinders. Schlage Encode, Kwikset Halo, Yale Assure and similar deadbolts usually include a keyed cylinder for when batteries die, and that key bypasses every code. We rekey the backup cylinder to match your other locks where the brand allows, then help you clear old user codes so nobody keeps a way in through the keypad or the keyhole.
• Cleaning and adjusting tired locks. A lock that sticks rarely needs replacing. Often it's packed with dust, old graphite or gummy spray oil, or the bolt drags because the door has settled. While each cylinder is apart we clean it, lubricate it with a dry PTFE product, and adjust the strike so the deadbolt throws fully without you pushing on the door.
• Interior keyed doors. A home office with client files, a wine room, a closet with a gun safe inside: these deserve their own key. We re-pin interior keyed levers and knobs during the same visit. Privacy locks with only a push button can't be rekeyed, but they can be swapped for a keyed lever if you want one.

What's different about Ontario

When everyone leaves early and gets home late, keys get handed to whoever can meet the plumber, sign for a delivery or let the dog out midday. That's how copies multiply. Our 6:30 a.m. start every day, plus evening hours until 11:30 p.m., makes it possible to schedule a home lock rekey around a long commute, either before you head out or after you're back.

Newer tract homes usually came with builder-grade locks, very often Kwikset SmartKey, keyed alike at closing. A house that's been lived in for a few years has its own key history, though: the solar installer, the landscaper, a home-warranty plumber, the neighbor who watched the dog. SmartKey cylinders reset quickly with a working key, so a home lock rekey in Ontario's newer neighborhoods tends to be a short visit, with an optional front cylinder upgrade if builder grade feels too basic.

Inland summers bake exterior locks. West-facing doors swell, strikes start to bind, and lubricant inside the cylinder breaks down into grit. When we handle a home lock rekey in Ontario's hotter months, we clean each plug, use a dry lubricant that won't gum up, and adjust strikes so the bolt throws without forcing. Smart lock batteries also drain faster in heat, so we check those while we're there.

Example situations

• Picture a high schooler who loses a backpack holding the house key and a letter addressed to the family. Nothing seems to have happened yet, but the parents don't want to wait and find out. Booking a rekey that same night, before our 11:30 p.m. close, makes the lost key worthless before anyone could think to try it in the door.
• A typical call: a homeowner off SR-60 has finalized a divorce, holds sole title to the house, and wants the locks reset before the kids return from summer camp. We'd verify ID and the paperwork showing ownership, rekey the front, back and garage-entry doors to a new key, and cut keys for the parent and two teenagers. The former spouse's old key simply stops turning.
• A homeowner hands over a key ring with five keys: a Schlage for the front, a Kwikset for the back, a builder brand for the garage entry, a padlock key for the side gate and one nobody can identify. A home lock rekey in that house could mean re-pinning the Schlage locks, fitting a matching cylinder or lock on the back door, and replacing the padlock, so the ring shrinks to a single key.
• Imagine you've been away for six weeks while a friend's college-age son house-sat, watering plants and collecting mail. He was responsible, but he also lent the key to a buddy once when he got stuck at work, and that copy's whereabouts are now anyone's guess. A home lock rekey the week you return closes that loop for far less than the worry costs.

How the visit works

1. Tell us what's changed and which doors. Mention anything unusual on the first call, such as a smart lock, a high-security front cylinder, a lock with no working key or a door that already sticks. Those details change what we load into the van and keep the quote close to the final number.
2. Confirm you live there. Someone with authority over the home needs to be there: an owner, or a resident who can show ID with the address. If you rent the house, we'll also need your landlord's approval, since the lease usually requires them to hold a working key.
3. Walk the house and identify each cylinder. Each lock gets a quick check: does the key turn smoothly, does the bolt throw fully with the door closed, is the trim tight? We also note anything a rekey can't fix, so the quote reflects the real job rather than surprises halfway through.
4. Re-pin each cylinder. We remove each cylinder, push the plug out with a follower so the drivers and springs stay put, and replace the key pins with new ones matched to the new key. SmartKey locks reset with their tool instead. Nothing on the door gets drilled or cut.
5. Test every key in every lock. Every new key gets tried in every lock it should open, with the door open and again with it closed and latched. Then we try an old key in each cylinder to confirm it no longer turns. Small strike adjustments happen here if a bolt drags.
6. Hand over keys and close the loop. Before we leave we go over who gets which key and where the emergency spare will live. We'll also point out any lock we'd watch for future replacement. You pay the price we quoted unless you approved additional work along the way.

What affects the cost

• Whether you have working keys. Lost every key? That's still workable. The quote will include opening or removing the locked cylinders, and in a few cases replacing a cylinder that can't be serviced without its key. We'll explain which applies once we see the hardware on your doors.
• Condition of the hardware. Strike adjustments, loose trim and worn springs add a little time but often fix the reason a lock felt bad in the first place. Bigger problems, like a cracked deadbolt housing or a knob separating from its spindle, mean a replacement quote for that one door.
• Number of keys, timing and add-ons. When and where you book matters a little. Distance from our San Bernardino base, and whether you need us the same day or can pick a window later in the week, can shape the quote, and we tell you about any travel or timing charge before we head your way.

Every job gets a clear quote before any work starts. Call (951) 903-3193 with the details and we'll tell you what to expect for your situation in Ontario.

What not to do

• Spraying penetrating oil into a sticky lock and calling it fixed. Oil loosens things briefly, then attracts dust and gums up the pins, often leaving the lock worse within a season. A sticky cylinder usually needs cleaning, a dry lubricant and sometimes new pins, which a rekey supplies.
• Trusting a "Do Not Duplicate" stamp to control copies. Plenty of key kiosks and hardware counters will cut a standard key anyway, because the stamp is a request rather than a barrier. If copy control matters, choose a restricted keyway where blanks aren't sold over the counter.
• Re-pinning a lock that's failing mechanically. If the latch doesn't retract, the housing is cracked or the knob wobbles on its spindle, new pins won't help. Ask for an honest rekey-or-replace call on each lock before paying to rekey hardware that needs replacing within months.

What to do before we arrive

• Ask for keys cut by code after the rekey, and make future copies from one of those, not from a copy of a copy. Each generation of duplicates drifts slightly from the original cuts, and worn duplicates are a common reason a perfectly good lock starts to feel sticky.
• Schedule the visit for a time when every exterior door is reachable: furniture moved away from the French doors, the dog settled in a back room, the side gate open. Weeknight evenings suit many working households, since we're open until 11:30 p.m. every night in Ontario.
• Keep one spare new key somewhere other than the house: a trusted relative's place, a safe deposit box, a locked desk drawer at work. If everyone in the household misplaces theirs at once, a spare elsewhere saves you a lockout call on top of the rekey you just paid for.
• Thinking about new hardware within the next year? Say so before the rekey. It may make more sense to replace the front entry set now and key the remaining doors to match it, rather than paying to re-pin a lock you plan to remove anyway.

Getting to Ontario

Ontario is about 25 miles from our San Bernardino base, roughly 33 minutes in light traffic via I-215 North to the I-15 junction at Devore. When you call, you get an arrival estimate based on where the technician is and the traffic at that moment.

Stuck on the shoulder or in a parking lot along Ontario Ranch Road? Get somewhere safe, turn on your hazards, and give us the nearest exit or business so we can find the car without guessing.

About Ontario: Guasti began in 1904 as the company village of Secondo Guasti's Italian Vineyard Company, and its San Secondo d'Asti Church, completed in 1926, still holds services.

Planning a rekey in Ontario?

Call (951) 903-3193 and tell us how many doors you want on the new key and the brand of the locks if you know it. We'll quote the rekey before any work starts.