Commercial Rekey Projects in Ontario, Planned Door by Door

Commercial Rekey in Ontario: what to expect

How a building is cored decides how a commercial rekey feels. With conventional fixed cylinders, every cylinder has to come off the door, be disassembled, re-pinned and reinstalled. With interchangeable cores, the hardware stays mounted and only a figure-eight-shaped core comes out, released by a control key. Small format cores, the A2 and A4 pinning systems used by Best, Falcon, Arrow and others, and large format cores from Schlage, Sargent, Corbin Russwin, Yale and Medeco both follow this idea. For a rekey, that means new cores can be pinned ahead of time and swapped at each door in moments, which makes IC buildings well suited to frequent tenant turnover. The trade-off is the control key: anyone holding it can pull any core in the system, so it needs tighter custody than any master key. If your property has fixed cylinders and you rekey often, ask whether converting the high-turnover doors to IC housings is worth it. Julian's Locksmith can explain both approaches and quote each so you can compare them on paper before deciding.

How we can help in Ontario

• Mortise cylinder rekeying. Many mortise cylinders in commercial buildings are decades old and stiff from dust and graphite buildup. During the rekey we clean the plug and shell, replace tired springs where needed, and lubricate lightly. If a cylinder's pin chambers are too worn to hold a new combination, we'll tell you and quote a replacement instead.
• Construction keying conversion. Contractors, subs and inspectors have all handled a project's construction keys. Converting to permanent keying at turnover makes sure none of those keys work once the building is occupied. We can coordinate timing with the general contractor or the owner's representative, so the conversion happens after the last punch-list visit.
• Tenant suite turnover rekeys. Leasing teams want a vacant suite ready to show. We can rekey it, cut a small set of keys for management and showings, and come back to cut the incoming tenant's keys once the lease is signed. That way no extra keys drift around while the space is on the market.
• Office furniture, cabinet and mailbox locks. File cabinet keys are usually stamped with a code that many key suppliers can cut from, which makes them weak key control. When we rekey furniture locks, we can move them off those common codes onto keys you control and record. Cabinets holding personnel files or patient records are the right place to start.
• Phased rekeys and keying records. Large properties rarely get rekeyed in one shot. We break the work into phases, building by building or floor by floor, and finish each phase with every door locked and tested. Between phases, the keying chart shows which doors are already on the new system, so staff know which key to carry where.

What's different about Ontario

Distribution centers and warehouses around Ontario lock far more than personnel doors: roll-up doors, dock offices, battery-charging rooms, fenced yards and fuel cages. Shift work means someone is always on site, so a commercial rekey has to be phased so every shift can still get through its doors. We inventory padlocks and gate cylinders along with the doors, because a perfectly rekeyed building with an old yard padlock still has a hole in it.

Plenty of building managers and owners drive in from elsewhere in San Bernardino County, so timing a commercial rekey around when a key holder can be on site matters. We start at 6:30 a.m. every day, which lets us finish a suite before tenants arrive, and we can work into the evening for buildings that clear out late. Tell us when your contact will be there, and we'll plan the visit around that window.

Apartment communities have commercial doors of their own: the leasing office, maintenance shop, pool equipment room, laundry rooms and package rooms. When a maintenance supervisor or leasing manager leaves, those keys often leave too. A commercial rekey of a community's back-of-house doors in Ontario can happen without touching residents' unit locks, and we'll keep the property's master structure intact if it's well documented.

Example situations

• For example, a church or community nonprofit that rents its fellowship hall to outside groups may have lent out keys for years without tracking them. A commercial rekey can split the property into a key for staff offices, a key for the hall and kitchen, and a master for the facilities committee, so a weekend rental no longer means handing over access to everything.
• For example, a property manager oversees a two-story office building off I-10 where a law firm just vacated a second-floor suite. The firm returned four keys, but the lease ran seven years. We'd rekey the suite entry and its three interior doors to a new change key, keep them on the building master, and confirm the old keys still fail at the shared restroom corridor, which stays on its own common key.
• Picture a strip center where the landlord gets a storefront back after a restaurant tenant closes. The front is a narrow-stile aluminum door with an Adams Rite deadbolt; the back is a steel door with a panic bar and rim cylinder. A typical commercial rekey here covers both cylinders plus the grease-enclosure padlock, and we'd note whether the storefront hook bolt is worn before the next tenant moves in.
• Picture a light-industrial unit off Milliken Avenue with two roll-up doors, an office entrance and a rear man door. The outgoing tenant left padlocks on the roll-ups and took the keys. After confirming the landlord's authorization, we'd remove those padlocks, rekey the office and man-door cylinders, and fit new rekeyable padlocks on the same key so the incoming tenant carries just one.

Step by step with Julian's Locksmith

1. Scope call. The first conversation covers what's driving the commercial rekey and who's behind it. A tenant departure, a lost master, a contractor handover and a portfolio cleanup each lead to different plans. Tell us who owns the building and who's ordering the work, since those may not be the same party.
2. Authorization and site walk. Before rekeying a commercial property we confirm your authority: ID plus a deed, management agreement, lease with lock rights, or a signed authorization from the owner. Then we walk the property with you or a maintenance lead and log every keyed opening, including the ones people tend to forget.
3. Keying plan and quote. For buildings with existing master keying, the plan respects what already works. If your management master opens every suite today, it should still open them afterward. We'll show which keys change and which stay, so tenants and maintenance staff know what to expect before anyone's key stops working.
4. Scheduling around occupants. We schedule commercial rekeys inside our hours: 6:30 a.m. to 11:30 p.m., seven days a week. Early starts suit retail and medical tenants; evening work suits offices. Each phase ends with every affected door locked, tested and keyed, never left half done.
5. Rekeying and testing each opening. Testing goes beyond turning the key. We check that latches retract fully, deadbolts throw completely, exit device trim responds, and storefront hook bolts engage their keepers. A rekey that works on the bench but binds once the door is pressed closed isn't finished.
6. Keys, records and handoff. Handoff is also when we review key custody: who holds masters, who holds control keys, how spares are stored. We'll suggest a simple sign-out log or key cabinet if you don't have one. Good custody keeps a fresh rekey from going stale within months.

How we quote the job

• Cylinder count and hardware mix. Counting before you call makes the first quote much closer. Walk the building once and tally exterior doors, interior locking doors, panic bars with keyed trim, storefront locks, padlocks and cabinets. Call with that number. We'll confirm it on site and quote any difference before doing extra work.
• Interchangeable cores versus fixed cylinders. Fixed cylinders take more labor per door: removal, disassembly, pinning, reassembly and reinstallation. On a small property the difference hardly matters. On a building that turns tenants over often, that extra labor repeats at every turnover, which is when an IC conversion starts to deserve a serious look.
• Master keying and keying charts. Keeping the existing master while changing suite keys is common and usually efficient when records exist. Changing the master itself means touching every cylinder in the system. If a master key was lost, that's often unavoidable, and we'll explain why before quoting the full scope.

Every job gets a clear quote before any work starts. Call (951) 903-3193 with the details and we'll tell you what to expect for your situation in Ontario.

Common errors that cost time and money

• Cutting too many keys. Ordering a dozen spares just in case puts unlabeled keys in drawers, glove boxes and truck consoles. Cut what current key holders need plus a small, logged spare set, and cut more later when someone actually needs one.
• Booking from a phone price that never asked about cylinder count or hardware type. A commercial rekey priced without knowing the doors is a number that will change once someone arrives. Ask what's included per cylinder, whether keys and padlocks are extra, and get the full price before work starts.
• Adding a key-locking deadbolt to the inside of an exit door to tighten security during the rekey. Building and fire codes generally require exits to open from inside without a key or special knowledge, with only narrow exceptions that come with signage and conditions. Egress function is a code question, not a keying choice.

Advice before you book

• Keep the keying chart and bitting list off site, or locked away from the general key cabinet. Anyone who reads it could have keys cut by code at a shop that doesn't ask questions. Treat it like the combination to the building, because in practice that's what it is.
• Collect old keys at tenant move-out even though you're rekeying. Returned keys tell you whether anyone held a master or a key to shared doors that wasn't on your list. If a returned key opens something unexpected, that door belongs in the commercial rekey too.
• Stamp keys with a number, not a door name. A key stamped 'Suite 210' or 'Warehouse Master' tells whoever finds it exactly where to go. Keep the number-to-door list in your own records only, and log who holds each numbered key and when it was issued.
• Where afternoon sun hits metal doors in Ontario, ask for a dry lubricant during the rekey. Heat bakes oily lubricants into a sticky paste that pulls in dust, which is a common reason commercial cylinders start to drag a year or two after the work is done.

Getting to Ontario

Ontario is about 25 miles from our San Bernardino base, roughly 33 minutes in light traffic via I-215 North to the I-15 junction at Devore. When you call, you get an arrival estimate based on where the technician is and the traffic at that moment.

Rush hour on Vineyard Avenue can stretch a drive considerably. We'd rather give you a realistic arrival window than an optimistic one, and we'll call you if a closure or a crash changes the plan.

About Ontario: Canadian-born brothers George and William Chaffey founded Ontario in 1882 as the Ontario Model Colony, naming it after their home province, and the city incorporated on December 10, 1891.

Planning a rekey in Ontario?

Call (951) 903-3193 and tell us how many doors you want on the new key and the brand of the locks if you know it. We'll quote the rekey before any work starts.