Rekey All House Locks in Upland: Doors, Gates and Codes

How this works in Upland

All means more than most people expect. On a typical single-family home, the list starts with the front door, which often has two cylinders: a deadbolt plus a knob or lever, or a handleset whose key lives in the deadbolt. Add the back door, the door from the garage into the house, and the garage side door, each commonly with a knob and a deadbolt. Then come the outliers: a steel security screen with its own cylinder, French doors with a euro cylinder, a slider with a small keyed latch, a side gate with a keyed deadbolt or rim lock, an RV gate padlock, a shed, a casita or a keyed home office. Some homes also have keyed window locks or a manual T-handle on an older overhead garage door. Mailboxes are separate: they're small cam locks with their own keys, and cluster boxes follow post office or HOA rules. When you set out to rekey all house locks, the first job is writing that list down, because a cylinder that never makes the list never gets re-pinned.

What we can do on-site

• Re-pinning every exterior door. For a whole house, we pin every cylinder from a single key code, so all the locks on the plan accept exactly the same key. The old pins go in the trash rather than back into stock. While each plug is out, we clean the cylinder and replace weak springs, so locks often feel better afterward.
• Gates, fences and pool enclosures. Side gates, RV gates and pool gates are easy to overlook because they're outside the house. Many carry keyed deadbolts, rim locks or keyed latches that a former owner or service worker may still hold a key to. We bring those that take a standard cylinder onto your new key, or onto a separate yard key if you prefer.
• Bringing mixed brands onto one key. Most houses end up with mixed hardware over the years. To rekey all house locks to one key, we choose the keyway you already have the most of, re-pin those cylinders, and replace the outliers with locks or cylinders in that keyway. Usually that means swapping two or three locks, not the whole house.
• Smart locks, keypads and lockboxes. Retrofit smart locks such as August or Level sit on your existing deadbolt and keep its original cylinder. We remove the smart unit, re-pin the cylinder to the new house key, reinstall the unit and check that it still locks and unlocks on command. The new physical key and the app then match the rest of the house.
• Key cutting, key count and a key record. New keys are cut in the van from the same code used to pin the cylinders, then tried in every lock they're meant to open. We cut the number you agreed to and suggest you count them before we leave. Fewer copies in circulation is half the value of rekeying the entire house.

What's different about Upland

Houses built before 1980 in Upland often show their age at the keyhole: brass knobs from the 1950s, a deadbolt added in the 1980s, a mortise lock on the front door and a different brand in each room. A whole-house rekey here begins with an honest look at which pieces still work. Original mortise sets can often be rebuilt and re-pinned, while worn knobs and loose latches are better replaced. We aim to keep the character and still end up on one key.

Family homes in Upland tend to accumulate keys: the babysitter, the grandparents, a neighbor who waters plants and a teenager who has lost three copies of their own. A whole-house rekey brings the key count back to something you can manage. We usually suggest a small number of new keys, a keypad or smart lock code for kids and visitors, and a clear plan for who can reach the garage and side gate.

Hillside and foothill homes in Upland often have multiple levels, deck doors, side stairs and retaining-wall gates, so the entry count runs higher than the doors you use daily. Wind-driven dust and ash settle into cylinders, and we clean each one as we re-pin it. Keep exits operable from inside for fire season, and make sure whoever evacuates with the family keys knows which ones matter. We plan for steep driveways when scheduling.

Example situations

• A remodel crew held a house key for three months, along with the garage keypad code. The work is finished and the family is pleased, but they would like the key count reset. We rekey the exterior doors and the garage entry, help them change the keypad code, and walk the property to be sure nothing else, like a side gate or lockbox, still works for the crew.
• A burglar finds the spare key hidden under a flowerpot and walks in through the front door. After the police report, the family decides rekeying one door isn't enough, since the same key opened the back door and the garage entry. We re-pin every cylinder, retire the hiding spot and suggest a keypad entry for visitors.
• Over twenty years, a family in Upland has handed spare keys to neighbors, a pet sitter, two babysitters, a visiting cousin and a long-gone housemate. Nobody can say who still has one. Instead of chasing each key, the couple rekeys every lock and decides to issue just three new keys, with a keypad code for anyone who needs occasional access.
• Two siblings inherit their parents' house near Old Magnolia and find a kitchen drawer holding over twenty keys, some labeled and most not. Rather than match each key to a lock, they decide to rekey everything. We confirm they can act for the estate, walk the property, re-pin the house, garage and gate, and put the workshop on its own key for whichever sibling keeps it.

From your call to the finished job

1. Count the keyholes before we arrive. Call or text with a rough list of doors: front, back, garage entry, garage side, gates and sheds. Mention brands if you can read them on the knob or deadbolt. That list helps us estimate the visit and bring parts, but the real count happens on site.
2. Gather every key and show you belong at the address. No working key for a few locks? Say so. We can still rekey them after verifying who you are, though locks that have to be opened or removed first take longer. Give us the history and we'll bring the right tools.
3. Agree on the key plan before any pins come out. Think through who gets keys. Household members, the pet sitter, the gardener and grown children may need different access. Naming them now lets us build levels into the cylinders instead of giving everyone the same key by default.
4. Rekey one door at a time and test as we go. We pull each cylinder, empty the old pins, rebuild it to the new code and reinstall it. Then we cycle it from both sides before moving on, so the house is never left with several doors half-finished while we work.
5. Cut, count and test every key. Expect the key count you agreed on, no more. Extra copies are available later from a key you keep in storage. Make duplicates from that master copy, not from daily-use keys, so the cuts stay precise and the count stays in your hands.
6. Reset what rekeying doesn't touch. Take one more lap through the property with the new key in hand. Try each door from outside, with the door shut behind you. If anything binds or sticks, tell us right away. A freshly rebuilt cylinder should turn easily, and problems are simplest to fix early.

How we quote the job

• How many keyways are in the mix. Standardizing can pay off beyond today's visit. A single keyway makes future locks and rekeys easier to match. If you were planning to replace a few worn locks anyway, doing it during a whole-house rekey often saves a separate trip.
• Locks at the edge of the property. Not everything at the edge is yours to change. Cluster mailboxes, HOA gates and utility enclosures belong to someone else. We point out what's out of bounds so the quote covers only what you can legally and practically change. That avoids paying for work you can't use.
• Key plan, key count and timing. Hours and distance play a role. We work every day from 6:30 a.m. to 11:30 p.m., weekends included. A planned daytime slot is easier to schedule than an urgent evening call. The drive from our San Bernardino base counts too, so share your address and any gate code when you book.

Every job gets a clear quote before any work starts. Call (951) 903-3193 with the details and we'll tell you what to expect for your situation in Upland.

Advice before you book

• Draw a rough floor plan and mark every keyed lock on it before we arrive. Include the ones you've never used, and check both faces of each door, since a keyhole on only one side still counts. That quick sketch becomes the backbone of your key record afterward.
• Keep house keys off the ring you hand to valets and mechanics. A shop can copy a house key as easily as a car key, and a parking attendant sees your registration and your address. Carry a small separate key for the car and keep the house key in your pocket.
• If you own a smart lock, have your phone ready with the app and admin access. Rekeying the backup cylinder doesn't touch app users or codes, and resetting them needs your login. Remove old users by name, not just the code you happen to remember.
• Tell the people who legitimately need access before the rekey, and hand out their new keys the same day. A mother-in-law who can't get in the next morning is a more common headache than a break-in. Write down who needs what: pet sitter, gardener, grown kids.

What not to do

• Keeping the old keys just in case. They open nothing after the rekey, but a drawer of dead keys confuses everyone later and tempts someone to hand one out. Recycle them, and keep only the new, labeled set and one stored master copy.
• Making copies from copies at a kiosk. A key duplicated from a worn duplicate drifts from the original cuts, and a few generations later it sticks or fails. Cut all later keys from your stored master, and keep a count of how many exist.
• Rekeying in pieces over several months. The front door this week, the back door next month, the gate eventually. The gaps stay open, the key set keeps changing, and you pay for several trips. Do the whole property once, using one agreed plan.

Reaching Upland

Upland is about 24 miles from our San Bernardino base, roughly 30 minutes in light traffic via Belmont and Palm Avenues to I-215 North, I-15 South at the Devore junction. When you call, you get an arrival estimate based on where the technician is and the traffic at that moment.

We plan the drive the way a delivery route gets planned: freeway first, Campus Avenue where it makes sense, then the side streets you describe. A landmark or the color of your building helps the technician spot you.

About Upland: Foothill Boulevard carried the National Old Trails Road and later Route 66 through Upland, where the Buffalo Inn has served buffalo burgers since 1929.

Planning a rekey in Upland?

Call (951) 903-3193 and tell us how many doors you want on the new key and the brand of the locks if you know it. We'll quote the rekey before any work starts.