House Lock Replacement in Ontario

What to know first in Ontario

A house lock replacement covers several families of hardware, and each opening needs its own kind. The front and back entries usually carry a bored deadbolt and a knob, lever or handleset. The door between the garage and the house typically gets a deadbolt and a latch too, and that door is usually expected to be solid or rated and to close by itself, so a lock swap shouldn't strip its closer or self-closing hinges. The garage side door often has the weakest lock on the property. Sliding glass doors use a narrow hook latch set into the door's stile, matched by screw-hole spacing. French doors may use flush bolts or a multipoint lock. Side gates need weather-resistant latches, and sheds use padlocks and hasps. Interior doors carry passage and privacy sets. We plan the house as a set, matching style and keying across all of it, while choosing the right mechanism for each opening rather than putting the same box on every door. Exact requirements vary by door and local rules, so we look before we promise.

Work included on a typical visit

• Exterior entry doors keyed alike. Exterior doors are the priority in any house lock replacement. We match each door's bore and backset, install Grade 1 or Grade 2 deadbolts, and set each strike so the bolt slides in easily. A door that needs a shove to lock gets adjusted first.
• Garage-to-house door and garage side door. Burglars like garages because they're out of sight once the overhead door is open. If your garage entry door has only a knob lock, we add a deadbolt during the house lock replacement, reinforce the strike, and make sure the door still swings shut and latches by itself.
• Sliders, French doors and other back-of-house openings. Patio openings use their own hardware, not the bored locks found on entry doors. We match sliding hook latches by screw spacing, replace multipoint gearboxes on French doors when they stiffen, and key outside handles to the house where the door allows it.
• Side gates, sheds and outbuildings. Wood gates sag and metal gates rust, and either one makes latches stop catching. We replace the gate lock, adjust or rehang the gate so the latch lines up, and choose hardware rated for sun and rain. Have a pool? Pool gates need self-closing, self-latching hardware, which we install or replace.
• Converting mixed brands to one key. Keyed-alike store packs match only within the box. If you bought several, we rekey them all to one combination on-site. We do the same for good existing locks, so new and old hardware share one key and nobody has to remember which box a lock came from.

Local factors in Ontario

Heat reshapes door hardware across Ontario. West-facing doors swell and bind, plastic parts soften, lubricants dry out and keypad batteries lose life faster. A whole-house lock replacement is a good time to switch to metal-bodied sets, check door clearance and choose finishes that tolerate sun without peeling. We often find that the same two or three doors on the hot side of the house cause most of the complaints about sticky, stiff locks.

Ontario has many older houses where a whole-house lock replacement uncovers surprises. There might be a skeleton-key mortise lock on the front, a 1970s knob on the back and a garage side door with no lock at all. Original doors often have thick wood that takes new hardware well, but the bores vary. We inventory every lock, keep any period hardware worth saving, and bring the rest up to one key and a consistent finish without damaging old doors.

Newer neighborhoods in Ontario usually come with builder-grade hardware on every door, installed by the same crew with the same short screws. Everything fits standard bores, which makes a whole-house replacement quick. The weak points are quality, not fit: thin finishes, light deadbolts and strikes that barely reach the frame. We replace the exterior sets with sturdier ones, lengthen the screws, match the finish throughout and key it all alike.

Common situations

• An owner converting a house to a short-term rental needs code-based entry on the front door, a mechanical backup, privacy locks with outside release on every bedroom and sturdy gate latches. We plan the whole set: a smart deadbolt up front, keyed-alike backups elsewhere and new interior privacy sets. Codes can be issued and canceled without handing out metal keys.
• A family in a 2000s tract home near Vineyard Avenue finds the finish peeling on every exterior knob. Rather than replacing them one at a time as each fails, they ask for one coordinated upgrade: matching Grade 2 sets on the front, back and garage doors, a better strike on each, and one key. The weekend project they had postponed for years becomes a single visit.
• A homeowner rents a backyard casita and wants the tenant's key to open only the casita and the shared gate, never the main house. We replace the casita deadbolt, key the side gate to the casita key and rekey the main house to a different one. Two key systems, no overlap, and the owner carries both.
• An owner is moving back into a house she rented out for years. Former tenants still hold keys, and the garage keypad code was shared with half a dozen people. We replace the locks that took the most abuse, rekey the rest, reset the keypad and give her a new key set. She takes the house back on her own terms.

From your call to the finished job

1. Tell us how many doors and why. Gather what you can before we arrive: any keys you have, a list of the doors you know about and photos of anything unusual, such as an old slider or a gate with a padlock. You don't need exact measurements. The walk-through is how we find out what is really on the property.
2. Verify you live at or own the house. Before we replace or rekey anything we confirm you live at the house or own it, using photo ID and a document that ties you to the address, such as a utility bill, mortgage statement or lease. A locksmith who skipped this step would change the locks on anyone's home.
3. Walk the property and build the plan. This step keeps whole-house jobs from getting messy. By the end of the walk-through you know the count, the condition and the recommended action for every lock. If a door is unusual, we tell you what we'd need to order before promising a one-visit finish.
4. Approve one quote for the whole job. The quote shows replacements, rekeys, parts, reinforcement and labor in plain lines, so you can see where the total comes from. If you want to trim it, we can drop interior sets or keep a good lock, and the total changes accordingly.
5. Work exterior first, then the rest. Where a door needs adjusting, we do it as part of this step: easing a strike, resetting a hinge, trimming a sticky edge. A lock that lines up with its strike lasts longer, and the doors close without the shove many owners have learned to live with.
6. Key everything alike, test it and leave a record. Before we go we write down what is on each door: brand, model, finish and keyway. Keep the note in a drawer. It makes the next repair, a matching lock for an addition or a rekey after a tenant moves out much easier.

Pricing factors

• How many locks, and how many are replaced versus rekeyed. A house with six exterior locks, a slider and two gates is a bigger job than a house with two doors. Rekeying the good ones can bring the total down considerably. You decide how much to replace, and the quote shows each option.
• Keying plan and number of keys. Smart locks add a keying layer: the backup cylinder gets keyed to the house, and codes get set up. Restricted keyways, key cards and duplicated spares add up, so decide how many keys the household really needs before the visit.
• One visit versus phased work, and timing. Most owners prefer a single visit because everything is keyed together and finished. If your budget calls for phases, we do the exterior doors first, rekey everything to one key and return later for interior sets. Each extra trip adds travel.

Every job gets a clear quote before any work starts. Call (951) 903-3193 with the details and we'll tell you what to expect for your situation in Ontario.

Advice before you book

• Plan for pool or gate rules if your yard has them. Local building rules often cover self-latching gates and latch heights, and the pool-side door may have its own requirements. Ask your building department, then tell us what you need so the hardware fits.
• Think about the garage. Its entry door gets the least attention and the most traffic, and a forgotten side-door lock or a shared keypad code is a common weak point. Include them in any lock job, and change the keypad code if one is used.
• Collect every old key after the job and take the useless ones out of circulation. A key that no longer fits any lock should not sit on a neighbor's hook as false reassurance. Hand out the new keys deliberately, and keep a count.
• Use levers on bedrooms and baths, especially with children or older relatives in the house. A lever with an outside emergency release opens quickly if someone gets locked in. Knobs also work, but levers are easier on hands and under stress.

Common errors that cost time and money

• Changing locks one door at a time over a long stretch. Meanwhile an old key still opens whichever doors haven't been done. If you must phase the work, do the exterior doors in one visit and rekey the rest to the same key right away.
• Buying keyed-alike packs from different boxes. Each box shares its own key, but the next box doesn't. You end up with three or four keys again. Pick one keyway, rekey everything to match, and test every key in every lock.
• Replacing every lock by default. A house lock replacement doesn't mean tossing hardware that still works. A sound Grade 1 deadbolt only needs new keys. Replace what's worn, damaged or weak, rekey the rest, and put the savings toward reinforcement or a better garage entry lock.

Service in Ontario

Ontario is about 25 miles from our San Bernardino base, roughly 33 minutes in light traffic via I-215 North to the I-15 junction at Devore. When you call, you get an arrival estimate based on where the technician is and the traffic at that moment.

Most trips into Ontario use I-15 for at least part of the drive, and the technician keeps an eye on live traffic along the way so the arrival estimate you heard on the phone stays honest.

About Ontario: The city opened Ontario Municipal Airport in 1929, and local control returned in November 2016 when the Ontario International Airport Authority took over from Los Angeles World Airports.

New or replacement locks in Ontario?

Call (951) 903-3193 and tell us which doors and what kind of hardware you have in mind. If you already bought the lock, keep the box handy so we can check it fits the door, and we'll quote the install before any work starts.