Rekey Locks after Buying a House in Redlands, Before You Unpack

How this works in Redlands

It helps to be clear about what a rekey does and doesn't do. Rekeying changes who can operate a lock. It doesn't make the lock stronger, the door thicker or the frame harder to kick in. If the deadbolt on your new home is an entry-level Grade 3 model held by short strike screws in a soft jamb, fresh pins won't change how it handles a shoulder or a pry bar. That's why a good post-purchase visit looks past the cylinder. We check whether each exterior door has a deadbolt at all, whether the bolt fully extends into the strike, and whether the strike screws reach the stud behind the jamb rather than stopping in thin trim. We look at glass near each lock, since a pane within arm's reach of a thumbturn changes the advice. For buyers who want more than a key change, the next steps are clear: security pins that resist picking and bumping, Grade 1 or Grade 2 hardware on the main entry, reinforced strikes, and restricted keyways that stop copies from being cut at any hardware counter. None of it is required. We'll explain which upgrades suit your doors and budget, then rekey the rest.

Work included on a typical visit

• Whole-house rekey on possession day. Possession day is when this service makes the most sense. We arrive with pins, key blanks and a code machine, work door by door, and test every new key in every lock before leaving. If a cylinder turns out to be seized or broken, we stop and show you rather than forcing it.
• Garage entry and side door locks. The door between the garage and the house is usually a solid or fire-rated door on self-closing hinges. A stiff latch or a misaligned strike can stop it from latching on its own, which undermines both the fire separation and the lock. We rekey that set, then make sure the door closes, catches and locks without anyone giving it a push.
• Gates, sheds and outbuildings. Pool gates add a safety wrinkle. They need to keep closing and latching on their own, and a stiff keyed latch or a padlock hung through the hasp can quietly defeat that. When we bring a pool gate onto your new key, we check that it still self-closes and self-latches, and suggest keyed latch hardware that preserves both functions.
• Mailbox lock change. A mailbox lock is a small cam lock, and the right replacement comes down to measurements: cylinder length, cam length and offset, and which direction the cam turns. We match those so the door closes flush and the cam catches the frame. On HOA-owned cluster boxes, we work only on the compartment the association confirms belongs to you.
• Key control after the move. Once only your keys work, keep it that way. We can cut a counted set of copies, label which key goes to which area if you keep some separate, and suggest who should hold spares. For contractors and movers, a temporary key that we rekey out afterward avoids starting from scratch later.

How Redlands shapes the job

Inland heat bakes exterior locks. Lubricant dries, pins gum up, and keypads on sun-facing doors wear out faster. When we rekey after a purchase in Redlands, we clean and lubricate each cylinder with a dry graphite or PTFE product rather than oil that attracts dust, replace tired springs, and check keypad batteries, which hot weather drains faster than many owners expect.

Older homes in Redlands often carry decades of key history: original knob locks, deadbolts added by a later owner, maybe a rim lock on a back door. Vintage cylinders can be stiff or corroded, and some original hardware isn't worth re-pinning. During a post-purchase rekey, we'll tell you which locks deserve new pins, which deserve retirement, and whether those older doors and frames will hold a modern deadbolt properly.

Homes near campus have frequently been student rentals, which means years of tenants, roommates and parents with copies. Some have interior bedroom locks as well. If you buy one, rekey every exterior door and decide whether those bedroom locks stay, get rekeyed, or are swapped for simple privacy hardware. Near Lincoln Memorial Shrine, we'll walk the house with you and count every keyed door.

Common situations

• Imagine buying a home whose sellers had a Kwikset keypad deadbolt on the front and a Wi-Fi smart lock on the back door. The keypad still opens with their code, and the smart lock still shows up in their app. We'd clear every stored code, factory-reset the smart lock, pair it to your phone, and rekey both backup cylinders to your new key.
• Say you buy a newly built home and assume the locks are pristine. Builders often use construction keying, where the crew's key is supposed to quit working after your first key turns. A locksmith would test each cylinder with the construction key if one is available, confirm the change took, and rekey anything that didn't. It's a short visit that replaces assumption with certainty.
• Suppose escrow closes and the ring from the agent opens the front deadbolt but not the side door or the door from the garage. Maybe a seller swapped those locks years ago and kept the keys in a drawer that left with them. After checking your ID and closing papers, a locksmith would open the two odd locks, read their pins, and bring all three doors onto one new key.
• For example, a couple closes on a 1960s single-story home in East Redlands, and the seller's agent hands over three different keys plus a garage remote. During the walk-through we'd find a Kwikset front deadbolt, a Schlage knob on the garage entry door and a padlock on the side gate. A typical plan: re-pin what matches, swap the odd cylinder, and leave them with one key for every door.

Step by step with Julian's Locksmith

1. Book around your possession date. Call (951) 903-3193 as soon as you know when you'll get the keys. Tell us the closing date, whether the sellers are renting back, and roughly how many exterior doors the house has. We'll schedule the rekey for possession day or the first visit after, before your movers if possible.
2. Bring proof of ownership. Since your license won't show the new address yet, bring photo ID plus a closing statement, grant deed, escrow instructions or similar documents in your name. If the deed hasn't recorded yet, escrow paperwork showing the close is fine. We check this before touching any lock; it protects you as the new owner.
3. Walk the property and count cylinders. We also try every key the sellers left in every lock. That quick test shows which locks the old ring actually operates, turns up doors nobody had a key for, and flags cylinders that were swapped years ago. While walking the perimeter, we keep an eye out for leftover lockboxes and hidden spares so you can remove them.
4. Re-pin each cylinder. We remove each cylinder, push out the old pins, and load a new combination using our key gauge and pinning kit, matched to the fresh key we've cut. Master pins aren't needed in a single-family house, which keeps the locks simpler and harder to manipulate. Then each cylinder goes back exactly as it came out.
5. Reset codes and test every key. Then it's your turn. You operate each lock yourself with the new key, enter your keypad codes, and see how the smart lock behaves from the app and from the door. We show you where the batteries go, what the low-battery warning looks like, and where the backup key works, so nothing surprises you later.
6. Hand over the keys and the record. The visit ends with keys in your hand and a clear record of the work. Keep it with your closing papers. It lists the locks we handled and the keying, which makes later additions, like a new smart deadbolt, easy to match. Then reset the garage remotes and you're done.

How we quote the job

• Mixed brands and keyways. Off-brand and import locks are the wild card. Some use keyways for which pins and blanks are hard to find, and some cylinders can't be removed without breaking the housing. In those cases, a new Kwikset or Schlage lock often costs less than the labor of forcing an odd cylinder onto your key. We'll quote both paths side by side.
• High-security and smart locks. If the previous owner installed premium hardware, you've inherited good security and a slightly more involved rekey. Patented keyways control who can cut keys, so blank availability varies. Keypad and Wi-Fi locks need code clearing and resets on top of rekeying the backup cylinder. Each item is quoted separately so you can decide.
• Scheduling and location. Bundling saves a return trip. If you plan to add a deadbolt to the garage entry, install a smart lock or replace a failing patio handle, doing it during the rekey means one visit instead of two, and travel is part of every quote. Splitting the work across separate appointments is fine too, but each trip adds to the total.

Every job gets a clear quote before any work starts. Call (951) 903-3193 with the details and we'll tell you what to expect for your situation in Redlands.

Mistakes to avoid

• Assuming the sellers handed over every key. They gave you the keys they could find. Copies made years ago for a babysitter, a contractor or a neighbor are almost never accounted for, and lockbox access during the sale added more people. Rekeying is the only way to know the count is zero.
• Replacing perfectly good locks when rekeying would do. If the hardware works smoothly and you like how it looks, new pins and keys solve the access problem for much less. Replacement makes sense for worn, damaged, low-grade or mismatched locks, or when you want a smart lock upgrade.
• Assuming new locks from a store box are unique. Retail locks ship with factory combinations drawn from a limited set, so the same key code turns up in other packages on other shelves. If you install new hardware yourself after buying, having it rekeyed to a fresh combination is what makes those keys truly yours.

Advice before you book

• If you plan a remodel, give contractors a temporary key and plan to rekey once they're finished, or install a keypad lock whose code you can delete. Rekeying twice costs less than wondering how many copies a crew made, and good contractors won't be offended by it.
• Call the alarm company to change the master and user codes, and ask them to remove the previous owner's contact list. In HOA communities in Redlands, contact management to deactivate the seller's gate remotes or pool fobs and issue yours. These sit outside a locksmith's work but belong on the same checklist.
• Erase the garage door opener's memory using the learn button on the motor unit, then reprogram only your own remotes and car buttons. Change the exterior keypad code too. A seller's old remote clipped to a visor, or a code shared with a landscaper, can open the big door long after the locks are rekeyed.
• Factory-reset every smart lock instead of just deleting users in an app. A reset removes the previous owner's account access and any shared guest codes. Then set up your own account, create a strong master code and rekey the backup cylinder, since that key may still be sitting in someone's junk drawer.

Getting to Redlands

Redlands is about 19 miles from our San Bernardino base, roughly 25 minutes in light traffic via Belmont Ave and Palm Ave to I-215 South. When you call, you get an arrival estimate based on where the technician is and the traffic at that moment.

Homes and businesses just off Citrus Avenue are routine stops for us. Give the suite or unit number and any gate instructions, and say whether the van can park out front or should pull into a side lot.

About Redlands: The Mill Creek Zanja, an irrigation ditch dug by about 1820, is a California Historical Landmark and still runs through parts of town.

Planning a rekey in Redlands?

Call (951) 903-3193 and tell us how many doors you want on the new key and the brand of the locks if you know it. We'll quote the rekey before any work starts.