Keyed-Both-Sides Deadbolts in Redlands: Where They Fit and Where They Don't

What to know first in Redlands

A standard single-cylinder deadbolt has a key cylinder outside and a thumbturn inside. A double cylinder replaces the thumbturn with a second key cylinder, keyed alike so one key works both faces. The bolt, housing and strike are the same; the difference is that nobody can open the door from inside without a key. That is the whole point, and also the whole risk. The attack it defends against is specific: a burglar breaks glass in the door, a sidelight or a nearby window, reaches in and turns the thumbturn. If no glass sits within arm's reach of the thumbturn, a double cylinder adds nothing against kicking, prying or drilling, and it adds a lock-in hazard. In Redlands, we start every double cylinder deadbolt installation by measuring where the glass is, what the door is used for, and whether the bolt and strike behind it are strong enough to deserve the upgrade.

Work included on a typical visit

• Exit and code check before we drill. Our quote begins with a conversation: which door, how many exits, who sleeps where, what's on the other side of the glass. That tells us whether a double cylinder is a sound security measure or a hazard. We put the reasoning in plain language so you can decide with the facts.
• Interior storage rooms and secured closets. A home office, a server closet or a storage room can use a double cylinder to stay locked from both sides. We confirm the room isn't a bedroom or the only route to an exit, then fit the lock, key it to a single key and set the strike so a pry bar has less to work with.
• Keying, spare keys and the key plan. We key the new cylinders to your existing keyway, such as Kwikset KW1 or Schlage SC1, or to a fresh key. For properties with many doors, a keyed-alike plan saves keys. For high-security options, restricted blanks limit copying of the one key everyone relies on.
• Strike, jamb and frame reinforcement. Glass doors often sit in lighter frames than solid entries. Our installation includes checking frame condition, replacing short strike screws and adding reinforcement where needed. We explain what each addition does and what it costs before we do it, and nothing gets added without your say-so.
• Safer alternatives when a double cylinder is the wrong fit. We can also move the vulnerable point: a deadbolt placed farther from the glass, a taller lock position on the door, or a keypad deadbolt with no key to hunt for. We walk through realistic options for your specific door before quoting anything.

Local factors in Redlands

Downtown storefronts in Redlands often have older glass doors, narrow stiles and transoms. The main entrance has occupancy rules, and exit hardware may be required, so a double cylinder rarely fits there. Back-of-house doors may be different, depending on occupancy and exit counts. We assess the building, explain which hardware suits each door and tell you when to check with the fire marshal or building department.

Warehouses and light industrial units around Redlands have office doors with glass panels, loading doors and personnel doors that count as exits. Occupant-load rules matter here. A double cylinder suits an interior supply room or tool crib, not a personnel exit. We help you tell them apart, fit the right lock on each and keep your exit routes clear and compliant.

Hillside and foothill homes near Redlands face wildfire evacuation risk and sometimes steep exterior stairs, so a quick exit matters. Smoke and darkness make the seconds a key hunt takes dangerous. A double cylinder on the main exit is a poor trade. We recommend a standard deadbolt on main exits and keep any keyed-both-sides locks for outbuildings that aren't part of an evacuation route.

Example situations

• A homeowner installed a double cylinder deadbolt years ago and keeps the key in the lock whenever someone is home. We point out the contradiction: a key sitting in the interior cylinder is exactly what a hand reaching through broken glass would turn. She chooses a single-cylinder deadbolt and laminated glass for the nearest pane, which solves the key problem and the glass problem.
• The owner of a boutique has a glass-panel rear door with a thumbturn within reach of the pane. Employees use that door to leave, and it opens onto an alley. A double cylinder would slow an emergency exit. We install a Grade 1 single-cylinder deadbolt with a heavier strike, keep the thumbturn, and suggest security film on the glass so the front and alley doors keep their exit capacity.
• A 1920s Craftsman near A.K. Smiley Public Library has a front door with nine small glass panes and a thumbturn deadbolt six inches from the nearest pane. The owner asks for a double cylinder. We explain that this is the home's main exit, so a lock needing a key to leave conflicts with exit guidance. We install a strong single-cylinder deadbolt with a box strike instead, and she calls a glazier about laminated glass for the pane nearest the lock.
• A man in Santa Fe Depot District keeps a table saw and a bench full of tools in a detached garage with a glass-panel side door. Nobody sleeps there, and a roll-up door offers a second way out. A double cylinder deadbolt fits well. We install it on a box strike, key it to match his house key, and he carries the key on his ring with a spare kept in the kitchen.

How the visit works

1. Talk through the door and the reason. We begin by listening: what happened or what worries you, how the household uses the door, who lives there. Break-in history, kids, older relatives and guests all matter. Then we give an honest arrival estimate and explain what we'll check when we get there.
2. Check exits, glass and the people involved. This step separates a sound installation from a bad one. We confirm another exit exists, count the people who'd need to use it, and talk through the key plan. If we recommend against the lock, we say so before any drilling begins.
3. Measure, quote and choose the hardware. With measurements in hand, we confirm the stile can hold a 2-1/8-inch bore, the thickness suits the lock and the finish matches your hardware. We quote the lock, the strike reinforcement and any keying before we start, and you can decline.
4. Prepare the door. If a previous lock sat in the door, we inspect the old bores and fill or sleeve any oversize holes. On thick doors we prepare for an extension kit. The prep takes more care than the mounting, and it is why a lock turns smoothly years later.
5. Fit both cylinders, key them and set the strike. Mounting is simple: the lock body, two cylinders and two through-bolts. The care is in alignment, so the key turns freely from both sides and the bolt slides into the strike without touching. We adjust the strike until it does, then confirm the screws bite into framing.
6. Test the lock and plan the key. We test the lock several times from both sides with the door open and closed. Then we agree on the key plan: where the key hangs inside, out of reach from outside, and who knows where it is. You get spare keys and a short checklist.

How we quote the job

• Lock grade and brand. Double cylinder deadbolts come in standard, Grade 2 and Grade 1 versions, and the heavier the lock, the higher the price. Brand and finish matter too. We show two or three choices that fit your door and explain what each adds beyond price.
• Door prep and thickness. Wood doors with glass panes are slower to drill than a plain slab. The jig, masking and careful bore cutting all add time, though they protect your door. If the stile is too narrow for a standard bore, we discuss a different lock rather than force the fit.
• Keys and keying. Starting fresh with a new key costs about the same as matching your old one, but matching saves you carrying another. Keyed-alike plans across several doors add time per lock. Restricted systems add cards and slower copying. Tell us which approach you prefer.

Every job gets a clear quote before any work starts. Call (951) 903-3193 with the details and we'll tell you what to expect for your situation in Redlands.

What to do before we arrive

• If you rent, don't swap in a double cylinder without written permission. Many leases restrict lock changes, and landlords carry exit and liability concerns of their own. Ask about reinforcing the strike or protecting the glass instead; those requests usually meet less pushback. Keep any approval letter with your lease.
• Practice getting out. With the door locked, walk from the farthest room to the door in the dark and use the key. Do it with children and guests too. If it takes more than a moment, rethink the plan or the lock. Repeat the drill whenever the household changes.
• Never leave the key in the interior cylinder as a habit. A hand reaching through broken glass can turn it just like a thumbturn, and you've gained nothing over a single cylinder. If you can't keep the key somewhere else, a double cylinder isn't the right lock for that door.
• Review the setup every year. Kids grow, guests come and go, and keys get moved. Walk through the exit drill again, check that the spare still works and make sure the key hook is where you left it. A small annual check keeps the lock from turning into a hazard.

What not to do

• Leaving the key in the lock all day. It feels safe because you can always get out, but a key in the interior cylinder can be turned by anyone who breaks the glass and reaches in. If the key lives in the lock, you've paid for a double cylinder and kept the weakness.
• Assuming a double cylinder stops all break-ins. It targets the reach-in method only. A kick, a pry or a drill doesn't care which kind of cylinder is on the inside. Reinforce the strike and frame too, or the lock protects against one attack and ignores the others.
• Putting a double cylinder on the main exit and hiding the key far away. In a fire, that costs seconds nobody has. Households do it because a pane of glass worries them. Protect the glass instead and keep a normal thumbturn on the door your family relies on to leave.

Service in Redlands

Redlands is about 19 miles from our San Bernardino base, roughly 25 minutes in light traffic via Belmont Ave and Palm Ave to I-215 South. When you call, you get an arrival estimate based on where the technician is and the traffic at that moment.

Once the evening commute thins out on SR-210, drive times usually shrink. That makes an evening call before closing a practical option for non-urgent jobs that you couldn't fit into the workday.

About Redlands: Interstate 10 opened through Redlands in 1962, and the old US Route 99 alignment it replaced is now Redlands Boulevard.

New or replacement locks in Redlands?

Call (951) 903-3193 and tell us which doors and what kind of hardware you have in mind. If you already bought the lock, keep the box handy so we can check it fits the door, and we'll quote the install before any work starts.