Adding or Upgrading a Deadbolt in Redlands

What to know first in Redlands

A deadbolt has four parts that all have to agree with each other. The cylinder holds the pin tumblers and accepts the key. A flat tailpiece runs from the cylinder through the bolt mechanism to the inside thumbturn, so turning either side drives the bolt. The bolt slides out of the door edge, ideally a full inch, and on better models it carries a hardened steel pin or roller that spins under a saw blade. Last, the strike in the jamb receives the bolt. Installation is about making those parts line up under real conditions. If the face bore is off-center, the tailpiece twists and the key feels gritty. If the edge bore drifts, the bolt rubs before it's fully out. If the strike pocket is shallow or misplaced, the bolt stops short, and a bolt that hasn't reached full extension isn't truly deadlocked; on some designs it can be pressed back with modest force. On every deadbolt installation in Redlands, we check each of those points with the door closed, because a lock that works on an open door can still fail the moment the weatherstrip compresses.

What we can do on-site

• Adding a deadbolt above an existing knob or lever. Some doors in Redlands have a lone keyed knob and nothing else. Adding a deadbolt is the biggest security improvement that door can get, because a spring latch can be slipped or shouldered open. We match finish and keyway so one key runs both locks, and set the new bolt high enough to clear the existing latch strike.
• Double-cylinder and one-sided deadbolts, with an egress check. Some Redlands homeowners want an existing double-cylinder deadbolt converted back to a thumbturn, often after a new baby, an aging parent moving in, or a fire-safety talk at school. We swap the inside cylinder for a turn assembly where the brand allows it, or replace the lock with a matching single-cylinder model keyed to your key.
• Keyed alike to your existing keys. A new deadbolt shouldn't mean another key on the ring. We rekey its cylinder to match your current house key, or rekey everything to a fresh key if the old ones have been floating around for years. Schlage, Kwikset, Yale and Baldwin use different keyways, so we choose hardware that can actually share your key.
• French doors and double-door entries. On a pair of doors, the deadbolt on the active leaf throws into the edge of the inactive one, so that inactive leaf has to be locked solidly top and bottom. We install or upgrade flush bolts that reach into the head jamb and a floor or threshold strike, then fit the deadbolt with a strike sized for a door edge.
• Rental, multi-unit and small-business deadbolts. Property managers in Redlands often need several units handled in one trip. We bring matching hardware, key each unit to its own key under a master if you use one, reinforce strikes on doors that have taken abuse, and leave the keys tagged. Incoming tenants get a deadbolt that works smoothly from day one.

What's different about Redlands

Downtown offices and older commercial buildings in Redlands often have heavy wood or hollow-metal doors, sometimes with original mortise locks or tired deadbolts. We install Grade 1 deadbolts or mortise deadlocks suited to those doors, check the egress requirements for each opening, and key the new hardware into existing master systems so building management keeps control over who can open what.

Warehouses and distribution buildings around Redlands have hollow-metal man doors in steel frames that take a beating from forklifts, dust and constant use. We install Grade 1 deadbolts or mortise deadlocks fitted to steel frames, use strikes designed for hollow-metal jambs, and make sure any door serving as an exit still opens from inside without a key, which keeps the building in line with fire inspections.

Older homes in Redlands often have solid wood doors that take a deadbolt well, but the hardware on them may date back decades: short-throw bolts, worn cylinders and strikes held by tiny screws. Some still rely on a lone knob or an original mortise lockset. We work with the door's existing holes where possible, avoid cutting into decorative panels, and fit a modern deadbolt with a full throw and a long-screw strike, matching period finishes where we can.

Example situations

An Olive Avenue Craftsman has a front door with a glass pane beside the lockset, and the owner asks for a double-cylinder deadbolt. The technician explains the egress problem, since a family in a fire shouldn't need a key at the door. They install a single-cylinder Grade 2 deadbolt with a heavy strike and suggest security film on the glass. The owner leaves with a stronger door and no key needed to get out.

• For example, a landlord with a small fourplex gets a repair list after a tenant complaint, including worn deadbolts with stubby bolts that barely catch. We'd replace each unit's deadbolt with a full one-inch-throw model, key every unit differently, reinforce two strikes showing old pry marks, and hand over tagged keys with a simple key record. A job like that can usually be finished in one scheduled visit rather than four separate trips.
• Say you just closed on a newer tract home in the 92373 ZIP code. The builder installed light Grade 3 deadbolts with thin two-screw strikes. We'd swap the front, back and garage-entry doors to Grade 2 or Grade 1 deadbolts, key them alike, and replace the strike screws on every exterior door. Because the keys change at the same time, any construction or realtor copies still floating around stop working that day.
• For example, picture a 1960s single-story home near A.K. Smiley Public Library with a solid fir back door that has never had a deadbolt, just an old brass knob. We'd measure a 2-3/8-inch backset, bore above the knob with a jig, set a Grade 2 deadbolt keyed to the front door, and replace the strike's short screws with 3-inch ones that reach the stud. The homeowner ends up with one key for both doors and a back entry that finally locks properly.

How the visit works

1. Tell us about the door. Call (951) 903-3193 and describe the door: wood, steel or fiberglass, whether it already has a deadbolt hole, and what hardware is on it now. A photo of the door edge and the inside face helps us bring the right jig, bits and deadbolt the first time.
2. Assess the door, frame and options. Before any tool touches the door, we look at the hinges, the gap on the latch side, the weatherstrip and whether the bolt will land in sound wood. If something needs fixing first, like a sagging hinge, we say so and price it separately, so the decision stays yours.
3. Prepare the door. Steel and fiberglass doors get extra care. We locate the internal lock block, use bits suited to metal or composite skins, and keep the foam core sealed. On wood, we score the veneer and bore from both faces so the hole stays crisp on the inside and outside of the door.
4. Reinforce the strike and jamb. The strike pocket needs to be deeper than the bolt's throw so the bolt never bottoms out. We cut it, set a box strike or heavy plate, and pilot-drill for the long screws. Where the shim gap is wide, a shim goes behind the strike so tightening doesn't bow the jamb.
5. Mount, key and align. The bolt goes into the edge with the correct side facing up, the exterior cylinder and tailpiece pass through, and the interior turn piece is screwed on. We key the cylinder to your existing key or a new one, then test operation with the door open and again with it closed.
6. Test and hand over. We cycle the lock several times from both sides, try every key, and confirm the bolt reaches full throw into the strike. You get your keys, a quick walkthrough of the hardware, and tips for keeping the deadbolt working through Redlands's heat and dust.

How we quote the job

• The deadbolt you choose. Grade, brand and features all move the price. A Grade 2 residential deadbolt costs less than a Grade 1 commercial unit, and Medeco or Mul-T-Lock cylinders with key control cost more again. Finish can matter too, since some specialty finishes cost more than the common satin nickel or bronze options.
• How much strike and frame reinforcement. Reinforcement scales with the door's risk. A back door hidden from the street, or a side door facing an alley, may justify a full jamb kit, while a front door on a busy cul-de-sac may need only the upgraded strike. We put those options and their costs side by side so you can choose.
• Keying and number of keys. If the deadbolt you choose uses a different keyway from your other locks, matching them may mean rekeying or replacing additional cylinders. We point out that trade-off before you buy hardware, so the convenience of a single key doesn't turn into an unexpected expense on the day.

Every job gets a clear quote before any work starts. Call (951) 903-3193 with the details and we'll tell you what to expect for your situation in Redlands.

Advice before you book

• Fresh weatherstripping can push the door away from the stop and pull the bolt out of line with the strike. If your deadbolt starts dragging right after weatherstrip work, that's probably the reason, and moving the strike slightly is usually a small fix.
• If there's glass within arm's reach of your thumbturn, deal with the glass before reaching for a double-cylinder deadbolt. Security film, laminated glass or a solid sidelight addresses the reach-through risk without putting a keyed lock between your family and the way out.
• Check how far your deadbolt actually throws. Open the door, turn the thumbturn, and look at the bolt sticking out of the door edge. A good deadbolt extends about an inch. If yours shows much less, or stops short when the door is closed, it isn't giving you the protection you're counting on.
• A deadbolt only protects you when it's thrown. Make a habit of turning it every time you close the door, even for a quick trip to the mailbox or the side yard, because the spring latch in your knob can be slipped with a thin tool in seconds.

What not to do

• Drilling freehand without a jig. A face bore that's slightly off-angle or an edge bore that drifts makes the bolt rub and the tailpiece twist. The lock works at first but wears quickly, and fixing a misdrilled hole often means a reinforcement plate or filler block.
• Reusing the short screws packed with the strike. Many deadbolt kits include screws that reach only the jamb. Without longer screws anchored in the stud, a well-placed kick can tear the strike out of the frame no matter how strong the deadbolt itself is.
• Installing a deadbolt in a hollow-core door and assuming the job is done. These doors have only a thin wood frame around the edge, and a kick can split the skin around the lock. On an exterior or garage-entry opening, a solid door is the better investment.

Reaching Redlands

Redlands is about 19 miles from our San Bernardino base, roughly 25 minutes in light traffic via Belmont Ave and Palm Ave to I-215 South. When you call, you get an arrival estimate based on where the technician is and the traffic at that moment.

Most trips into Redlands use Wabash Avenue for at least part of the drive, and the technician keeps an eye on live traffic along the way so the arrival estimate you heard on the phone stays honest.

About Redlands: The A.K. Smiley Public Library opened in a Moorish-style building in 1898, and the Lincoln Memorial Shrine stands on the grounds behind it.

New or replacement locks in Redlands?

Call (951) 903-3193 and tell us which doors and what kind of hardware you have in mind. If you already bought the lock, keep the box handy so we can check it fits the door, and we'll quote the install before any work starts.