2022 Toyota Mirai Key Replacement

2022 Mirai key specs

The second-generation Mirai uses a four-button smart key with lock, unlock, trunk and panic buttons; catalogs list FCC HYQ14FLA under Toyota parts 8990H-62030 and 8990H-62140, powered by a CR2032. Entry is by touching a door handle, and the car starts with the POWER button whenever the fob is inside the cabin. An emergency blade slides out of the fob for the driver's door. This is a different fob from the first-generation car's, so the two generations can't share keys.

What's specific to the 2022 Mirai

The 2022 Toyota Mirai is the second of 6 model years in the Mirai JPD20 (2nd generation) (2021–2026), so it shares its key system with the rest of that run, which makes replacement parts easy to source.

A 2022 Toyota Mirai is about 4 years old now. Original fob batteries are near the end of their life at this age, so weak range or a "key not detected" message is often a battery before it is a failed fob. Cars this age are often on their second owner, which is when a single remaining key and a request for a spare tend to show up.

Key options for the 2022 Toyota Mirai

• Smart proximity key (push-to-start). Making a new smart key is mostly a programming job. The fob has to match the vehicle's FCC ID, frequency and chip, and then the keyless system must be told to accept it, normally through the OBD-II port. Depending on the platform, that can mean entering a PIN, waiting through a timed security procedure, or on some newer vehicles, using manufacturer online access. When every key is lost, certain models need a module removed and read on the bench. For your Toyota Mirai JPD20 (2nd generation), we'll tell you which of those applies, and if a step is dealer-only, you'll hear it before we drive out. The emergency blade hidden inside the fob is cut by code during the same visit.

How the Toyota immobilizer works on the Mirai

Toyota phased in transponder immobilizers model by model, so two Toyotas from the same year can need very different keys. Starting with the 1998 model year, the Camry, Avalon, 4Runner, Sienna and Land Cruiser used a fixed-code Texas 4C chip, while US Corollas, the Echo and other economy models kept plain mechanical keys into the mid-2000s. Between 2003 and 2005, depending on the model, the encrypted Texas 4D-67 chip took over. Around 2010 came the 80-bit G chip, and from about 2014 the 128-bit H chip, also called 8A. Many of these later keys carry a stamped D, G or H on the blade. Smart keys spread to US Toyotas with cars like the 2004 Prius, 2005 Avalon and 2007 Camry, moved to 128-bit fobs in the 2010s, and since about 2022 Toyota has used a newer generation: Texas 8A BA-type fobs in models such as the bZ4X and Crown, and NXP Hitag AES, often called 4A, in the Corolla, Corolla Cross and 2025 Camry. Partner-built cars follow their partner's rules, so the 86 and GR86 use Subaru systems and the GR Supra uses BMW's. The letter on your blade, the FCC ID on your fob and your VIN tell us which system we are working with.

• Key suppliers list the HYQ14FLA fob as not reusable, so it should be bought new rather than taken from another car.
• Toyota continued the second-generation Mirai through the 2026 model year, still sold new primarily in California.
• First-generation HYQ14FBA fobs will not work on these cars, even though both generations use a four-button layout.

Programming a 2022 Mirai key

New fobs must be registered with professional equipment; there is no on-board method. On current tools, adding a fob to this generation usually involves online data for Toyota's 128-bit smart system, and some cars need a direct connection at the smart key ECU. All-keys-lost is less widely supported than on high-volume Toyotas, so we confirm by VIN first and will tell you plainly if a Toyota dealer that services fuel-cell vehicles is the better route.

Spare fobs can be added on many cars with current tools. All-keys-lost support is limited on this low-volume car, and some cases need the dealer.

Lost every key to your Mirai?

1. Gather your documents and the VIN. Find your registration or title and a government photo ID in the same name. Note the VIN, which is printed on the driver's side of the dashboard and usually on your insurance card. If the paperwork is locked in the car, tell us; we'll open the vehicle first and check it there.
2. Get into the vehicle without damage. If the car is locked, we open it with non-destructive tools such as an inflatable wedge and a long-reach rod, or by picking the door lock. Some vehicles need a careful approach to avoid triggering the alarm, which can interfere with programming later.
3. Originate a new key from the car. With no key to copy, the cuts come from the vehicle itself. We retrieve the key code through manufacturer channels where possible, or decode a door lock with a pick-decoder tool. Then we cut the blade on our code machine and confirm it turns the lock smoothly.
4. Program the key to the immobilizer. Next, the new key is introduced to the car's security system. Many vehicles allow this through the OBD-II port with a PIN or security procedure. Some all-keys-lost cases require reading a module on the bench, and a few platforms only allow dealer programming, which we'll tell you up front.
5. Erase missing keys and add a spare. A lost key's metal blade can still open your doors even after its chip is erased. If the keys disappeared along with something showing where you live or park, consider rekeying the car's door lock cylinders too. We'll also recommend leaving with two working keys, not one.

Why a spare key pays for itself

• A spare stored safely at home rescues you from a locked car with the fob sitting on the seat, a key dropped somewhere along a hiking trail, or a fob that stops responding on a busy morning. Keep it indoors, never in a magnetic box under the bumper.
• A spare turns a future all-keys-lost emergency into a simple add-a-key job. With one working key in hand, programming is quicker, and the chip or fob can often be paired without decoding locks or reading modules, which keeps the cost of a lost key far lower.
• Some vehicles make it hard to add a key once you're down to one. Certain immobilizer systems let an owner program an extra key on-board only when two working keys are present, so a second key preserves the easy options for later and avoids a full reset.

Dealer or mobile locksmith?

Price and parts are the other half of the comparison. Dealers typically sell factory keys only and charge their posted service rates for programming. We offer factory keys where it matters and quality aftermarket alternatives where they perform well, and the quote covers cutting, programming and the trip, with nothing tacked on at the end. Timing differs too. Dealer service departments generally keep business hours, while we take automotive calls every day from 6:30 a.m. to 11:30 p.m., which covers early commutes and late evenings. We're closed overnight, and we'll be upfront if your timing means the dealer or a next-day visit is the better plan. Neither option is wrong; the right one depends on your Mirai and your schedule.

Mirai key battery

A fob battery rarely dies all at once. The warning signs build: you have to get closer to the car before the doors respond, the dash shows a key battery or key-not-detected message, or the push-button start only works with the fob held near the button. Inland heat speeds that decline, especially for fobs left in a hot cabin or on the dashboard. Keep a spare CR2032 at home in a cool drawer, sealed in its original package, and buy from a busy store where stock turns over quickly. A cell that sat on a shelf for years may arrive already partly spent.

How the job works

1. Identify the exact key your Mirai uses. We ask a few quick questions on the phone: the year, whether the car starts with a turn key or a button, how many keys you have left, and whether the remote still works the doors. Then we check the VIN against our programming references so the van arrives with the correct blank or fob, not a close guess.
2. Verify ownership before any work. Before cutting or programming, we compare your government photo ID with the vehicle registration or title and check that the VIN on the paperwork matches the VIN on the dash. If the registration is locked inside, we open the car first, confirm the documents, and only then make the key.
3. Get the key code or decode the lock. If you still have a working key, we can read its cuts directly and check them against the factory depths for the Toyota keyway. A worn key gets corrected back to spec during this step, so the new key turns crisply instead of reproducing years of wear in a fresh piece of metal.
4. Cut the blade on-site. Our van carries a code-cutting machine that handles both traditional edge-cut blades and the laser-cut, side-milled profiles common on newer keys. The blade is cut to the code, then test-fitted in a door lock and the ignition or emergency keyhole to confirm smooth operation before any programming begins.
5. Program the chip, remote or smart key. Programming tells the car's computers that the new key belongs to the vehicle. Transponder chips are added to the immobilizer, remote buttons to the body control module, and proximity fobs to the keyless system. If a step requires dealer-only access on your Mirai, you'll have heard that before we arrived, not halfway through the job.
6. Test everything and clear out old keys. Before we leave, every function gets checked: doors, trunk or liftgate, panic button, remote range, engine start, and the emergency blade in the driver's door. If keys are missing, we delete them from the car's memory where the system allows, so a lost key can no longer start the engine.

What affects the price of a Mirai key

• The type of key. Price follows complexity. The more the key does, the more it costs to replace: brass blade, then chip, then remote buttons, then full keyless entry and push-button start. If your Mirai came with different key styles by trim, the one your car actually uses is the one that sets the quote.
• Factory or aftermarket parts. Factory keys and fobs carry the manufacturer's part number and usually the highest parts cost. Quality aftermarket keys use compatible electronics at a lower price and work well on many vehicles. We tell you which options we trust for your car, and where an aftermarket version has known range or fit issues, we steer you to OEM.
• All keys lost or adding a key. Adding a key while a working one is in hand is the simpler job. With every key gone, we may have to open the car, decode a lock to originate the cuts, and run a longer programming routine, so all-keys-lost work takes more time and costs more.
• Travel, timing and extra repairs. Because we come to you, the distance from our San Bernardino base and the time of the call play a part. So does anything we find along the way, such as a worn ignition cylinder or a seized door lock. You hear about each item and get a quote before we start work.

Call (951) 903-3193 with your VIN and the keys you still have, and we'll quote the job before any work starts.

Common Toyota key problems

• If a smart key battery dies, most push-button Toyotas will still start. Press the brake and touch the Toyota emblem side of the fob to the start button; the car reads the chip directly, so a flat cell isn't a lockout.
• Toyota fob batteries vary by family. The 2009-2012 Camry-style smart key takes a CR1632, many 2016-2022 fobs take a CR2032, and larger 2022-and-later fobs take a CR2450. Most remote-head keys use a CR2016, while older separate remotes use a CR2032.
• A used Toyota smart key bought online is already locked to its first car. Many 2004-2020 fobs can be professionally reset for reuse, but fobs from the newest systems may not be resettable, so buying used can waste money.

Tips from a mobile locksmith

• Make the spare before you need it. Adding a key while one still works is quicker and less expensive than starting from nothing, and it keeps the simpler programming options available. Good moments are right after buying the car, or as soon as one of your two keys goes missing.
• If your vehicle has a proximity key, think about where it sleeps at night. A fob hanging by the front door can sit within range of relay equipment used to open and start cars from outside. A drawer deeper inside the house, a signal-blocking pouch, or the fob's own sleep mode reduces that risk considerably.
• On any vehicle with a turn-key ignition, keep the key ring light. A heavy cluster of keys, tools and charms swings with every bump and slowly wears the ignition wafers and the key itself. When the key starts to stick or needs a wiggle to turn, deal with it early, before it stops turning entirely.

Proof of ownership

Making car keys is regulated work in California. Locksmiths are licensed and overseen by the Bureau of Security and Investigative Services under the Locksmith Act, Business and Professions Code section 6980 and following, and Julian's Locksmith holds company license LCO7891. Verification protects you more than anyone: a locksmith who will make a key for whoever asks will also make one for someone who wants your car. We record your name, the vehicle and its VIN on a work order, and we politely decline jobs where ownership can't be established. You can look up our license at search.dca.ca.gov.

Need a 2022 Toyota Mirai key?

Need a key for your 2022 Toyota Mirai? Call Julian's Locksmith at (951) 903-3193 with your VIN and tell us which keys you still have. We'll confirm what the job involves, give you a quote before any work starts, and come to you in Southern California with everything needed to cut and program the key on the spot.