2016 Scion tC Key Replacement

2016 tC key specs

Most second-generation tCs kept a turn-key ignition and a three-button remote-head key on the TOY43 profile, but moved to Toyota's 80-bit G transponder, marked by a stamped G on the blade. Listings put MOZB41TG on 2011-2012 cars and MOZB52TH on 2013-2016, and some early keys may still carry the older dot chip, so we read your key before ordering. Later and limited-edition cars, including the 2014 10 Series, have push-button start and a three-button smart fob. A plain G-chip transponder key without buttons is a budget-friendly spare on turn-key cars.

What's specific to the 2016 tC

2016 was the final model year of the tC AT20 (second generation). Late-run cars occasionally pick up running changes, so we check the VIN instead of assuming a 2016 Scion tC matches a 2011. At roughly 10 years old, a 2016 Scion tC has usually seen real wear. Ignition and door cylinders on high-mileage cars wear along with the key, so we cut new keys to factory code rather than copying a worn key. Fob cases crack, buttons wear through and solder joints loosen at this age, so a new shell or a replacement remote often beats repairing the old one. Many have changed hands more than once, so erasing keys you can't account for is worth doing during the visit.

Smart-key cars like the 2016 tC can be targeted with relay attacks that extend the fob's signal from inside your home, so keep fobs away from exterior walls or in a signal-blocking pouch, and have any missing fob erased from the car.

Key options for the 2016 Scion tC

• Remote head key. Remote-head keys take a beating. The rubber button pad wears through, the plastic housing splits at the seam, and the blade can snap right at the head after years of being used as a pry tool or hanging from a heavy key ring. When the electronics inside are still healthy, we can often move the circuit board and chip into a new shell and cut a fresh blade to your code, which keeps the existing programming intact. If the board is cracked or water-damaged, a new key is the honest answer. Either way, for your 2016 tC, we open the old key and show you what's broken before recommending anything.
• Smart proximity key (push-to-start). Proximity keys bring a security trade-off worth understanding. Because the fob is always listening, thieves with relay equipment can stretch its signal from inside your house to the car in the driveway. Keeping the fob away from exterior walls, or in a signal-blocking pouch, closes that gap, and some fobs offer a sleep mode described in the owner's manual. If a smart key for your 2016 Scion tC is lost or stolen, programming a replacement is the moment to delete the missing fob from the car's memory. And be wary of used fobs from online sellers: a lot of them are locked to the vehicle they came from and can't be reprogrammed to yours.
• Transponder (chip) key. There are two ways to give a new transponder key the right identity. Cloning reads the chip in a working key and writes that same ID onto a special cloneable chip, so the car can't tell the two apart. Programming adds a brand-new key ID to the immobilizer's memory through the OBD-II port, sometimes after entering a security PIN tied to the VIN. Cloning is handy when you have a working key and the chip family supports it. Programming is the better choice when keys are lost, because it also lets us remove keys you no longer control from the car's memory. For your Scion tC, we'll explain which method fits and why.

How the Scion immobilizer works on the tC

Scion was Toyota's youth brand from the 2004 through 2016 model years, so most Scion key systems are Toyota systems underneath, and the last few came from partners. What surprises owners is how uneven the immobilizer picture is. The tC is the Scion where a transponder immobilizer is the norm: a Texas 4D-67 chip through 2010, then Toyota's 80-bit G chip from about 2011. The low-priced boxes and hatchbacks are different. Parts catalogs list their remote keys in versions with and without anti-theft, and installer reports say many US xAs, xBs, xDs and iQs have no immobilizer at all, so a plain cut key starts them. Canadian-market versions should read a chip, because Canada has required immobilizers on new cars since 2007. The final three Scions broke the pattern. The Subaru-built FR-S uses a Toyota G chip in a four-button remote-head key, with a smart fob on its push-button editions. The iA is a Mazda2 sedan with Mazda's push-button smart key and NXP Hitag Pro fob, and the iM, a European Auris, uses a 128-bit Toyota H (8A) flip key. Because the same badge hides such different systems, we start every Scion job by checking your key and the car itself.

• A stamped G marks the 80-bit chip; a dot means the older 4D-67, and the two are not interchangeable.
• Factory remote-head keys for 2013-2016 tCs carry FCC ID MOZB52TH with a G chip, while 2011-2012 cars are listed under MOZB41TG.
• Push-button tCs use a three-button smart fob listed under FCC ID HYQ14ACX, a different part from the remote-head key.
• The 2014 facelift changed the styling but kept the G chip in its remote-head keys.

Programming a 2016 tC key

G-chip keys are registered through OBD-II with professional equipment, either as an added key alongside a working one or after an immobilizer reset when all keys are gone. That reset can take a while because of Toyota's built-in security wait. Push-button tCs add a smart fob that is registered in the same session, and all-keys-lost on those cars takes extra steps. The remote buttons on a remote-head key are synced as their own step. We cut the blade by code or decode the door lock, and on an all-keys-lost visit we program at least two keys so you leave with a spare.

Spare keys are routine on turn-key cars. All-keys-lost takes longer, and push-button tCs need extra smart key steps and an occasional dealer visit, so we confirm by VIN before the appointment.

Lost every key to your tC?

1. Gather your documents and the VIN. Call with the year, make, model and VIN if you can read it through the windshield, plus where the car is parked. Those details let us confirm whether your Scion tC can be done on-site and bring the right key, so the first trip is the only trip.
2. Get into the vehicle without damage. Entry comes before key-making because we need access to the ignition, the OBD-II port and sometimes the documents in the glove box. We take care with weather stripping, door frames and paint, and we confirm the dash VIN matches your registration before going any further.
3. Originate a new key from the car. Originating a key means building it without a sample. The door lock usually reveals most of the cuts; any it doesn't are worked out by test-cutting and trying the ignition or a second lock. The finished blade should feel like a factory key, not a forced fit.
4. Program the key to the immobilizer. Next, the new key is introduced to the car's security system. Many vehicles allow this through the OBD-II port with a PIN or security procedure. Some all-keys-lost cases require reading a module on the bench, and a few platforms only allow dealer programming, which we'll tell you up front.
5. Erase missing keys and add a spare. A lost key's metal blade can still open your doors even after its chip is erased. If the keys disappeared along with something showing where you live or park, consider rekeying the car's door lock cylinders too. We'll also recommend leaving with two working keys, not one.

Why a spare key pays for itself

• A spare stored safely at home rescues you from a locked car with the fob sitting on the seat, a key dropped somewhere along a hiking trail, or a fob that stops responding on a busy morning. Keep it indoors, never in a magnetic box under the bumper.
• A spare turns a future all-keys-lost emergency into a simple add-a-key job. With one working key in hand, programming is quicker, and the chip or fob can often be paired without decoding locks or reading modules, which keeps the cost of a lost key far lower.
• Some vehicles make it hard to add a key once you're down to one. Certain immobilizer systems let an owner program an extra key on-board only when two working keys are present, so a second key preserves the easy options for later and avoids a full reset.

Dealer or mobile locksmith?

Price and parts are the other half of the comparison. Dealers typically sell factory keys only and charge their posted service rates for programming. We offer factory keys where it matters and quality aftermarket alternatives where they perform well, and the quote covers cutting, programming and the trip, with nothing tacked on at the end. Timing differs too. Dealer service departments generally keep business hours, while we take automotive calls every day from 6:30 a.m. to 11:30 p.m., which covers early commutes and late evenings. We're closed overnight, and we'll be upfront if your timing means the dealer or a next-day visit is the better plan. Neither option is wrong; the right one depends on your tC and your schedule.

tC key battery

Battery details for the 2016 tC: CR2016 (remote-head key). Swap cells one at a time and match each one exactly; if a key still fails with a fresh battery, the board, buttons or programming may be the problem, which we can test on site.

How the job works

1. Identify the exact key your tC uses. We ask a few quick questions on the phone: the year, whether the car starts with a turn key or a button, how many keys you have left, and whether the remote still works the doors. Then we check the VIN against our programming references so the van arrives with the correct blank or fob, not a close guess.
2. Verify ownership before any work. California holds licensed locksmiths responsible for knowing whose car they're making keys for. We record your name, the VIN and the plate on a work order. If you aren't the registered owner, you'll need the owner's written authorization along with your own photo ID before we begin.
3. Get the key code or decode the lock. A key is cut from a code, not a guess. When the factory code can be retrieved through manufacturer channels after ownership is verified, we use it. When it can't, we decode a door lock with a pick-decoder tool that reads the wafer positions without damaging anything, then work out any missing cuts.
4. Cut the blade on-site. Our van carries a code-cutting machine that handles both traditional edge-cut blades and the laser-cut, side-milled profiles common on newer keys. The blade is cut to the code, then test-fitted in a door lock and the ignition or emergency keyhole to confirm smooth operation before any programming begins.
5. Program the chip, remote or smart key. Programming tells the car's computers that the new key belongs to the vehicle. Transponder chips are added to the immobilizer, remote buttons to the body control module, and proximity fobs to the keyless system. If a step requires dealer-only access on your tC, you'll have heard that before we arrived, not halfway through the job.
6. Test everything and clear out old keys. Before we leave, every function gets checked: doors, trunk or liftgate, panic button, remote range, engine start, and the emergency blade in the driver's door. If keys are missing, we delete them from the car's memory where the system allows, so a lost key can no longer start the engine.

What affects the price of a tC key

• The type of key. The biggest factor is technology. A plain mechanical key is a cutting job only. A transponder key adds a chip and programming. Remote-head and flip keys add a circuit board, and a proximity fob for a push-button Scion tC is the most involved of all, both in the part itself and in the programming.
• Factory or aftermarket parts. Factory keys and fobs carry the manufacturer's part number and usually the highest parts cost. Quality aftermarket keys use compatible electronics at a lower price and work well on many vehicles. We tell you which options we trust for your car, and where an aftermarket version has known range or fit issues, we steer you to OEM.
• All keys lost or adding a key. On some vehicles, losing the last key changes the programming entirely, from a quick add-key procedure to a full immobilizer reset or a module read on the bench. That extra labor shows up in the price, and it's the strongest argument for keeping a spare in the house.
• Travel, timing and extra repairs. Because we come to you, the distance from our San Bernardino base and the time of the call play a part. So does anything we find along the way, such as a worn ignition cylinder or a seized door lock. You hear about each item and get a quote before we start work.

Call (951) 903-3193 with your VIN and the keys you still have, and we'll quote the job before any work starts.

Common Scion key problems

• The separate remote on the first-generation xB is a common Toyota design shared with early-2000s Highlander, RAV4 and Tacoma models, so replacements are easy to find and can usually be paired on board without a computer.
• Scion remote-head keys often crack where the blade meets the plastic head. The circuit board usually survives, so a new shell with a freshly cut blade can fix it, provided the transponder chip moves across with the board.
• Inland Empire heat shortens the life of the CR2016 cells used in most Scion remote-head keys. If range drops to a few feet or the buttons work only some of the time, replace the battery before assuming the remote has lost its programming.

Tips from a mobile locksmith

• Never hide a spare key or fob on the outside of the car. Magnetic boxes in wheel wells and under bumpers are the first places a thief checks, and with a proximity fob, a hidden key can let anyone open the doors and drive away. Keep the spare at home or with someone you trust.
• Learn your car's dead-fob start method now, in the driveway, rather than in a dark parking lot later. Depending on the make, you hold the fob against the start button or place it in a marked pocket in the console. Also find the hidden keyhole on the driver's door handle and practice using the emergency blade.
• Make the spare before you need it. Adding a key while one still works is quicker and less expensive than starting from nothing, and it keeps the simpler programming options available. Good moments are right after buying the car, or as soon as one of your two keys goes missing.

Proof of ownership

Making car keys is regulated work in California. Locksmiths are licensed and overseen by the Bureau of Security and Investigative Services under the Locksmith Act, Business and Professions Code section 6980 and following, and Julian's Locksmith holds company license LCO7891. Verification protects you more than anyone: a locksmith who will make a key for whoever asks will also make one for someone who wants your car. We record your name, the vehicle and its VIN on a work order, and we politely decline jobs where ownership can't be established. You can look up our license at search.dca.ca.gov.

Need a 2016 Scion tC key?

Need a key for your 2016 Scion tC? Call Julian's Locksmith at (951) 903-3193 with your VIN and tell us which keys you still have. We'll confirm what the job involves, give you a quote before any work starts, and come to you in Southern California with everything needed to cut and program the key on the spot.