Scion iM Key Replacement

iM keys by generation

Every iM uses a turn-key ignition with a three-button flip key: lock, unlock and panic in a head that folds the blade away. Inside is a Toyota H transponder, the 128-bit 8A chip that replaced the G chip across much of Toyota's lineup. Replacement keys for the 2016 iM are listed under FCC IDs HYQ12BFA and HYQ12BFB, and the HYQ12BFB version is also listed for the 2017-2018 Corolla iM. Because the blade, chip and remote share one folding housing, a broken key is handled with a new shell or a whole new key, depending on what failed. H-chip keys are registered through the OBD-II port with equipment that supports Toyota's 128-bit system. With a working key, adding a spare is routine. With none, the immobilizer has to be put into registration mode using an emulator or a direct connection, which takes longer and isn't covered by every tool. The remote side is synced as part of the job, and the blade is cut by code or decoded from the door lock.

Scion key security

Scion was Toyota's youth brand from the 2004 through 2016 model years, so most Scion key systems are Toyota systems underneath, and the last few came from partners. What surprises owners is how uneven the immobilizer picture is. The tC is the Scion where a transponder immobilizer is the norm: a Texas 4D-67 chip through 2010, then Toyota's 80-bit G chip from about 2011. The low-priced boxes and hatchbacks are different. Parts catalogs list their remote keys in versions with and without anti-theft, and installer reports say many US xAs, xBs, xDs and iQs have no immobilizer at all, so a plain cut key starts them. Canadian-market versions should read a chip, because Canada has required immobilizers on new cars since 2007. The final three Scions broke the pattern. The Subaru-built FR-S uses a Toyota G chip in a four-button remote-head key, with a smart fob on its push-button editions. The iA is a Mazda2 sedan with Mazda's push-button smart key and NXP Hitag Pro fob, and the iM, a European Auris, uses a 128-bit Toyota H (8A) flip key. Because the same badge hides such different systems, we start every Scion job by checking your key and the car itself.

How we make a Scion key depends on which of three groups the car falls into. On the tC, FR-S and iM, the transponder in the key is registered through the OBD-II port with professional equipment, and the buttons on a remote-head or flip key are synced as a separate step. Push-button editions add a smart fob registered the same way. Toyota's 4D-67 and G systems let us add a key from one working key, and the immobilizer can be reset when none are left, though that reset often includes a security wait. On cars without an immobilizer, which covers many xA, xB, xD and iQ models, the job is mostly mechanical: we cut the TOY43-profile blade by code or by decoding a lock, then pair the remote through Toyota's door-and-ignition routine or a programmer, after testing a cut key in case yours reads a chip. The iA follows Mazda smart-key rules, with fobs that must be new or unlocked. First, we check your ID and registration.

All iM keys lost

Losing every key to a Scion is usually fixable in one visit, but what it takes depends on the model. On cars without an immobilizer, we decode the driver's door lock or cut from the key code, then pair a remote if you want one. On a turn-key tC, the immobilizer is reset through OBD-II before new keys are registered, and we program at least two keys so the lost ones can no longer start the car. Push-button tCs, the FR-S, the iM and the iA take longer: they involve pass-code, PIN or emulator steps, and an occasional car may need the dealer, so we confirm coverage by VIN before we drive out. For the iA, we register new Mazda smart fobs and cut the emergency blade to match the door lock. In every case, expect us to verify your ID and proof of ownership first.

1. Gather your documents and the VIN. Find your registration or title and a government photo ID in the same name. Note the VIN, which is printed on the driver's side of the dashboard and usually on your insurance card. If the paperwork is locked in the car, tell us; we'll open the vehicle first and check it there.
2. Get into the vehicle without damage. Entry comes before key-making because we need access to the ignition, the OBD-II port and sometimes the documents in the glove box. We take care with weather stripping, door frames and paint, and we confirm the dash VIN matches your registration before going any further.
3. Originate a new key from the car. With no key to copy, the cuts come from the vehicle itself. We retrieve the key code through manufacturer channels where possible, or decode a door lock with a pick-decoder tool. Then we cut the blade on our code machine and confirm it turns the lock smoothly.
4. Program the key to the immobilizer. All-keys-lost programming often takes longer than adding a key, because the car has no trusted key to authorize the change. We follow the procedure your Scion iM requires, then confirm the engine starts and keeps running and the remote or keyless functions respond.
5. Erase missing keys and add a spare. Once the car starts, we remove the lost keys from memory wherever the system allows, so they can't start the engine if someone finds them. Making a second key during the same visit costs much less than a repeat all-keys-lost call down the road.

Dealer or mobile locksmith?

Price and parts are the other half of the comparison. Dealers typically sell factory keys only and charge their posted service rates for programming. We offer factory keys where it matters and quality aftermarket alternatives where they perform well, and the quote covers cutting, programming and the trip, with nothing tacked on at the end. Timing differs too. Dealer service departments generally keep business hours, while we take automotive calls every day from 6:30 a.m. to 11:30 p.m., which covers early commutes and late evenings. We're closed overnight, and we'll be upfront if your timing means the dealer or a next-day visit is the better plan. Neither option is wrong; the right one depends on your iM and your schedule.

How the job works

1. Identify the exact key your iM uses. Every job starts with the VIN, the trim and a look at any key you still have. From those we confirm the keyway, the transponder or smart-key chip, the remote frequency, the FCC ID and the button layout. Two Scion iM keys that look identical can carry different electronics, so this step keeps the wrong part from ever reaching the car.
2. Verify ownership before any work. Before cutting or programming, we compare your government photo ID with the vehicle registration or title and check that the VIN on the paperwork matches the VIN on the dash. If the registration is locked inside, we open the car first, confirm the documents, and only then make the key.
3. Get the key code or decode the lock. If you still have a working key, we can read its cuts directly and check them against the factory depths for the Scion keyway. A worn key gets corrected back to spec during this step, so the new key turns crisply instead of reproducing years of wear in a fresh piece of metal.
4. Cut the blade on-site. Our van carries a code-cutting machine that handles both traditional edge-cut blades and the laser-cut, side-milled profiles common on newer keys. The blade is cut to the code, then test-fitted in a door lock and the ignition or emergency keyhole to confirm smooth operation before any programming begins.
5. Program the chip, remote or smart key. Programming tells the car's computers that the new key belongs to the vehicle. Transponder chips are added to the immobilizer, remote buttons to the body control module, and proximity fobs to the keyless system. If a step requires dealer-only access on your iM, you'll have heard that before we arrived, not halfway through the job.
6. Test everything and clear out old keys. The last step is a short walkthrough. We show you how many keys the car now recognizes, point out the dead-fob start method for your vehicle, and hand you an itemized receipt. If a spare makes sense, it's simplest to add it during this same visit while the equipment is already connected.

What affects the price of an iM key

• The type of key. The biggest factor is technology. A plain mechanical key is a cutting job only. A transponder key adds a chip and programming. Remote-head and flip keys add a circuit board, and a proximity fob for a push-button Scion iM is the most involved of all, both in the part itself and in the programming.
• Factory or aftermarket parts. Factory keys and fobs carry the manufacturer's part number and usually the highest parts cost. Quality aftermarket keys use compatible electronics at a lower price and work well on many vehicles. We tell you which options we trust for your car, and where an aftermarket version has known range or fit issues, we steer you to OEM.
• All keys lost or adding a key. On some vehicles, losing the last key changes the programming entirely, from a quick add-key procedure to a full immobilizer reset or a module read on the bench. That extra labor shows up in the price, and it's the strongest argument for keeping a spare in the house.
• Programming complexity and security access. Some immobilizers accept a new key with a few on-board steps. Others need a PIN code, a timed security wait, manufacturer online access, or removing a module to read its data. Every extra layer of security on the Scion system adds equipment time and labor to the job.

iM key types explained

• Transponder (chip) key. Transponder chips come in families, such as Texas Instruments 4C and 4D, Philips 46, Megamos 48 and the newer 128-bit AES types, and a Scion iM only accepts the one its immobilizer was built around. That's why a hardware-store blank that looks right often won't start the car. We match the blank to the vehicle's chip and keyway before cutting. One more practical note: the chip lives in the plastic head, and when that head cracks, the chip can fall out or shift away from the antenna. If the car starts some days and not others, a damaged head is a frequent reason, and replacing the key before it quits entirely costs less than an all-keys-lost visit.
• Flip (switchblade) key. The hinge is the weak point on most flip keys. The pivot pin loosens, the spring loses tension, the release button sticks, and eventually the blade either won't lock open or flops out on its own. Carrying the key half-open in a pocket speeds that wear along. If the electronics are healthy, a replacement shell with a new hinge and pin often brings a 2016 Scion iM flip key back to crisp action: we transfer the board and chip, move or recut the blade, and test every function. If the board has broken solder joints or water corrosion, we'll show you the damage and quote a new key instead.

Why a spare key pays for itself

• When you sell or trade in the vehicle, buyers and dealers expect two keys. A missing key can come up during an appraisal or a private-sale negotiation, so having both on hand keeps the conversation about the car, not about what it will cost the next owner to replace one.
• Two drivers sharing one key is a daily negotiation. A second key lets a partner, teenager or coworker use the vehicle without handing keys back and forth in parking lots, and it means one person losing their key ring doesn't leave the whole household stuck.
• Some vehicles make it hard to add a key once you're down to one. Certain immobilizer systems let an owner program an extra key on-board only when two working keys are present, so a second key preserves the easy options for later and avoids a full reset.

Tips from a mobile locksmith

• When a key's head cracks or its blade bends, replace it before it fails. A transponder chip can slip out of a split head, and a bent blade can break off inside the ignition or door lock, turning a simple key replacement into an extraction and repair job. Small symptoms are the inexpensive time to act.
• Learn your car's dead-fob start method now, in the driveway, rather than in a dark parking lot later. Depending on the make, you hold the fob against the start button or place it in a marked pocket in the console. Also find the hidden keyhole on the driver's door handle and practice using the emergency blade.
• If your vehicle has a proximity key, think about where it sleeps at night. A fob hanging by the front door can sit within range of relay equipment used to open and start cars from outside. A drawer deeper inside the house, a signal-blocking pouch, or the fob's own sleep mode reduces that risk considerably.
• Never hide a spare key or fob on the outside of the car. Magnetic boxes in wheel wells and under bumpers are the first places a thief checks, and with a proximity fob, a hidden key can let anyone open the doors and drive away. Keep the spare at home or with someone you trust.

Common Scion key problems

• Toyota marks chipped blades with a stamped dot (4D-67), G or H near the head. Replacement remote-head keys for the tC, xB, xD and iQ come in chipped and chipless versions that look alike, so match the stamp and FCC ID before buying one online.
• Installer reports say many US-market second-generation xBs, xDs and iQs have no engine immobilizer, so any correctly cut key can start the car. That makes a lost key a real theft risk, and re-keying the ignition and door locks is worth considering.
• Scion remote-head keys often crack where the blade meets the plastic head. The circuit board usually survives, so a new shell with a freshly cut blade can fix it, provided the transponder chip moves across with the board.
• On a first-generation tC, a spare that was cut but never programmed will turn the ignition and crank the engine, yet the car won't start until the 4D-67 chip is registered. Owners sometimes mistake this for a fuel or starter fault.
• Inland Empire heat shortens the life of the CR2016 cells used in most Scion remote-head keys. If range drops to a few feet or the buttons work only some of the time, replace the battery before assuming the remote has lost its programming.
• The iA's Mazda smart fob can still start the car with a dead battery: hold the fob against the START/STOP button while pressing the brake. The emergency insert key hidden in the fob opens the driver's door.
• The separate remote on the first-generation xB is a common Toyota design shared with early-2000s Highlander, RAV4 and Tacoma models, so replacements are easy to find and can usually be paired on board without a computer.

Proof of ownership

Before we cut or program a key for any vehicle, we verify that you have the right to it. Please have two things ready: the current registration or the title, and a government-issued photo ID with a matching name. We also check that the VIN on those documents matches the VIN plate on the dashboard. If the registration is locked inside the car, that's fine; we open the vehicle first, check the paperwork in the glove box, and only then make the key. If something doesn't line up, we stop and sort it out before any key is made.