Scion tC Key Replacement

tC keys by generation

Most second-generation tCs kept a turn-key ignition and a three-button remote-head key on the TOY43 profile, but moved to Toyota's 80-bit G transponder, marked by a stamped G on the blade. Listings put MOZB41TG on 2011-2012 cars and MOZB52TH on 2013-2016, and some early keys may still carry the older dot chip, so we read your key before ordering. Later and limited-edition cars, including the 2014 10 Series, have push-button start and a three-button smart fob. A plain G-chip transponder key without buttons is a budget-friendly spare on turn-key cars. G-chip keys are registered through OBD-II with professional equipment, either as an added key alongside a working one or after an immobilizer reset when all keys are gone. That reset can take a while because of Toyota's built-in security wait. Push-button tCs add a smart fob that is registered in the same session, and all-keys-lost on those cars takes extra steps. The remote buttons on a remote-head key are synced as their own step. We cut the blade by code or decode the door lock, and on an all-keys-lost visit we program at least two keys so you leave with a spare.

First-generation tCs use a Toyota transponder key on the TOY43 profile, with the Texas 4D-67 chip that Toyota marks with a stamped dot on the blade. Keyless entry was standard, and the usual key is a three-button remote-head key with lock, unlock and panic in the head, from the same key family as the Yaris, xD and iQ. A plain transponder key without buttons starts the car just as well and makes an affordable spare. Without a registered chip, a cut key turns the ignition, but the engine won't run. We register new keys through the OBD-II port with professional equipment, which works whether you have one key or none. When every key is lost, the immobilizer is reset first, a process that can include a timed security wait, and every key you want to keep is registered in the same session. The remote side of a remote-head key is added separately, either through Toyota's on-board door-and-key routine or with the programmer. The blade is cut by code or by decoding the door lock.

Scion key security

Scion was Toyota's youth brand from the 2004 through 2016 model years, so most Scion key systems are Toyota systems underneath, and the last few came from partners. What surprises owners is how uneven the immobilizer picture is. The tC is the Scion where a transponder immobilizer is the norm: a Texas 4D-67 chip through 2010, then Toyota's 80-bit G chip from about 2011. The low-priced boxes and hatchbacks are different. Parts catalogs list their remote keys in versions with and without anti-theft, and installer reports say many US xAs, xBs, xDs and iQs have no immobilizer at all, so a plain cut key starts them. Canadian-market versions should read a chip, because Canada has required immobilizers on new cars since 2007. The final three Scions broke the pattern. The Subaru-built FR-S uses a Toyota G chip in a four-button remote-head key, with a smart fob on its push-button editions. The iA is a Mazda2 sedan with Mazda's push-button smart key and NXP Hitag Pro fob, and the iM, a European Auris, uses a 128-bit Toyota H (8A) flip key. Because the same badge hides such different systems, we start every Scion job by checking your key and the car itself.

How we make a Scion key depends on which of three groups the car falls into. On the tC, FR-S and iM, the transponder in the key is registered through the OBD-II port with professional equipment, and the buttons on a remote-head or flip key are synced as a separate step. Push-button editions add a smart fob registered the same way. Toyota's 4D-67 and G systems let us add a key from one working key, and the immobilizer can be reset when none are left, though that reset often includes a security wait. On cars without an immobilizer, which covers many xA, xB, xD and iQ models, the job is mostly mechanical: we cut the TOY43-profile blade by code or by decoding a lock, then pair the remote through Toyota's door-and-ignition routine or a programmer, after testing a cut key in case yours reads a chip. The iA follows Mazda smart-key rules, with fobs that must be new or unlocked. First, we check your ID and registration.

All tC keys lost

Losing every key to a Scion is usually fixable in one visit, but what it takes depends on the model. On cars without an immobilizer, we decode the driver's door lock or cut from the key code, then pair a remote if you want one. On a turn-key tC, the immobilizer is reset through OBD-II before new keys are registered, and we program at least two keys so the lost ones can no longer start the car. Push-button tCs, the FR-S, the iM and the iA take longer: they involve pass-code, PIN or emulator steps, and an occasional car may need the dealer, so we confirm coverage by VIN before we drive out. For the iA, we register new Mazda smart fobs and cut the emergency blade to match the door lock. In every case, expect us to verify your ID and proof of ownership first.

1. Gather your documents and the VIN. Find your registration or title and a government photo ID in the same name. Note the VIN, which is printed on the driver's side of the dashboard and usually on your insurance card. If the paperwork is locked in the car, tell us; we'll open the vehicle first and check it there.
2. Get into the vehicle without damage. Entry comes before key-making because we need access to the ignition, the OBD-II port and sometimes the documents in the glove box. We take care with weather stripping, door frames and paint, and we confirm the dash VIN matches your registration before going any further.
3. Originate a new key from the car. Originating a key means building it without a sample. The door lock usually reveals most of the cuts; any it doesn't are worked out by test-cutting and trying the ignition or a second lock. The finished blade should feel like a factory key, not a forced fit.
4. Program the key to the immobilizer. All-keys-lost programming often takes longer than adding a key, because the car has no trusted key to authorize the change. We follow the procedure your Scion tC requires, then confirm the engine starts and keeps running and the remote or keyless functions respond.
5. Erase missing keys and add a spare. Once the car starts, we remove the lost keys from memory wherever the system allows, so they can't start the engine if someone finds them. Making a second key during the same visit costs much less than a repeat all-keys-lost call down the road.

Dealer or mobile locksmith?

The biggest difference between a dealership and a mobile locksmith is where the work happens. A dealer programs keys in its service bay, so if every key is lost, the car usually has to be towed there, and you work around the service department's schedule and the time it takes to order a key by VIN. Julian's Locksmith brings the cutting machine, key blanks and programming equipment to the car, whether it sits in your driveway, a workplace lot or a parking structure. For a 2016 Scion tC we can program on-site, that means no tow and no shuttle rides back and forth. The trade-off is real, though: on vehicles where only the dealer can program keys, a tow or appointment may still be necessary, and we'll say so before you spend anything on our visit.

How the job works

1. Identify the exact key your tC uses. We ask a few quick questions on the phone: the year, whether the car starts with a turn key or a button, how many keys you have left, and whether the remote still works the doors. Then we check the VIN against our programming references so the van arrives with the correct blank or fob, not a close guess.
2. Verify ownership before any work. Before cutting or programming, we compare your government photo ID with the vehicle registration or title and check that the VIN on the paperwork matches the VIN on the dash. If the registration is locked inside, we open the car first, confirm the documents, and only then make the key.
3. Get the key code or decode the lock. If you still have a working key, we can read its cuts directly and check them against the factory depths for the Scion keyway. A worn key gets corrected back to spec during this step, so the new key turns crisply instead of reproducing years of wear in a fresh piece of metal.
4. Cut the blade on-site. Our van carries a code-cutting machine that handles both traditional edge-cut blades and the laser-cut, side-milled profiles common on newer keys. The blade is cut to the code, then test-fitted in a door lock and the ignition or emergency keyhole to confirm smooth operation before any programming begins.
5. Program the chip, remote or smart key. With the blade done, we connect to the OBD-II port and register the new key with the immobilizer. Depending on the Scion system, this may involve a security PIN, a timed waiting period, or on-board button sequences for the remote. On some vehicles we clone a working key's chip instead, when that's the more reliable path.
6. Test everything and clear out old keys. The last step is a short walkthrough. We show you how many keys the car now recognizes, point out the dead-fob start method for your vehicle, and hand you an itemized receipt. If a spare makes sense, it's simplest to add it during this same visit while the equipment is already connected.

What affects the price of a tC key

• The type of key. Price follows complexity. The more the key does, the more it costs to replace: brass blade, then chip, then remote buttons, then full keyless entry and push-button start. If your tC came with different key styles by trim, the one your car actually uses is the one that sets the quote.
• Programming complexity and security access. Some immobilizers accept a new key with a few on-board steps. Others need a PIN code, a timed security wait, manufacturer online access, or removing a module to read its data. Every extra layer of security on the Scion system adds equipment time and labor to the job.
• Blade style and cutting. Traditional edge-cut blades are quick to cut. High-security laser-cut blades, with a groove milled into the side, need a specialized machine and more care, and the blanks themselves cost more. If we have to decode a lock to find the cuts, that adds labor as well.
• Travel, timing and extra repairs. Because we come to you, the distance from our San Bernardino base and the time of the call play a part. So does anything we find along the way, such as a worn ignition cylinder or a seized door lock. You hear about each item and get a quote before we start work.

tC key types explained

• Transponder (chip) key. Transponder chips come in families, such as Texas Instruments 4C and 4D, Philips 46, Megamos 48 and the newer 128-bit AES types, and a Scion tC only accepts the one its immobilizer was built around. That's why a hardware-store blank that looks right often won't start the car. We match the blank to the vehicle's chip and keyway before cutting. One more practical note: the chip lives in the plastic head, and when that head cracks, the chip can fall out or shift away from the antenna. If the car starts some days and not others, a damaged head is a frequent reason, and replacing the key before it quits entirely costs less than an all-keys-lost visit.
• Remote head key. Remote-head keys look similar across many vehicles, but the electronics inside are not interchangeable. Getting the right one for a Scion tC means matching the FCC ID and part number printed on the back or inside the case, the operating frequency, which is commonly 315 MHz on US-market cars, the transponder type, and the button layout. A trim with remote start or a power liftgate may use a four- or five-button version where a base trim uses three. We check those details against your VIN and your existing key, if you have one, before cutting the blade. A wrong match can look perfect and still refuse to program.
• Smart proximity key (push-to-start). Proximity keys bring a security trade-off worth understanding. Because the fob is always listening, thieves with relay equipment can stretch its signal from inside your house to the car in the driveway. Keeping the fob away from exterior walls, or in a signal-blocking pouch, closes that gap, and some fobs offer a sleep mode described in the owner's manual. If a smart key for your 2016 Scion tC is lost or stolen, programming a replacement is the moment to delete the missing fob from the car's memory. And be wary of used fobs from online sellers: a lot of them are locked to the vehicle they came from and can't be reprogrammed to yours.

Why a spare key pays for itself

• Electronics fail without warning. A fob dropped on concrete, run through the washing machine or soaked at the pool can quit for good. With a second programmed key, that's an annoyance you fix on your own schedule, not a stranded car that needs attention today.
• When you sell or trade in the vehicle, buyers and dealers expect two keys. A missing key can come up during an appraisal or a private-sale negotiation, so having both on hand keeps the conversation about the car, not about what it will cost the next owner to replace one.
• A spare stored safely at home rescues you from a locked car with the fob sitting on the seat, a key dropped somewhere along a hiking trail, or a fob that stops responding on a busy morning. Keep it indoors, never in a magnetic box under the bumper.

Tips from a mobile locksmith

• Photograph the back of your fob and any key tag that came with the car. The FCC ID, part number and key code printed there make ordering a replacement faster and more accurate. Store the photos somewhere you can reach from any device, not only on the phone that might go missing along with the keys.
• When a key's head cracks or its blade bends, replace it before it fails. A transponder chip can slip out of a split head, and a bent blade can break off inside the ignition or door lock, turning a simple key replacement into an extraction and repair job. Small symptoms are the inexpensive time to act.
• Learn your car's dead-fob start method now, in the driveway, rather than in a dark parking lot later. Depending on the make, you hold the fob against the start button or place it in a marked pocket in the console. Also find the hidden keyhole on the driver's door handle and practice using the emergency blade.
• Be careful with discount fobs from online marketplaces. A listing may match your remote's shape while using a different frequency, chip or FCC ID, and many used smart keys are locked to their original vehicle. If you already bought one, send us the listing or a photo before the visit so nobody pays for a programming attempt that can't work.

Common Scion key problems

• Toyota marks chipped blades with a stamped dot (4D-67), G or H near the head. Replacement remote-head keys for the tC, xB, xD and iQ come in chipped and chipless versions that look alike, so match the stamp and FCC ID before buying one online.
• Installer reports say many US-market second-generation xBs, xDs and iQs have no engine immobilizer, so any correctly cut key can start the car. That makes a lost key a real theft risk, and re-keying the ignition and door locks is worth considering.
• Scion remote-head keys often crack where the blade meets the plastic head. The circuit board usually survives, so a new shell with a freshly cut blade can fix it, provided the transponder chip moves across with the board.
• On a first-generation tC, a spare that was cut but never programmed will turn the ignition and crank the engine, yet the car won't start until the 4D-67 chip is registered. Owners sometimes mistake this for a fuel or starter fault.
• Inland Empire heat shortens the life of the CR2016 cells used in most Scion remote-head keys. If range drops to a few feet or the buttons work only some of the time, replace the battery before assuming the remote has lost its programming.
• The iA's Mazda smart fob can still start the car with a dead battery: hold the fob against the START/STOP button while pressing the brake. The emergency insert key hidden in the fob opens the driver's door.
• The separate remote on the first-generation xB is a common Toyota design shared with early-2000s Highlander, RAV4 and Tacoma models, so replacements are easy to find and can usually be paired on board without a computer.

Proof of ownership

Not every situation fits the simple case, so here's how we handle the common exceptions. For a leased or financed vehicle, a registration that lists you as the registered owner or lessee works with your ID. If you just bought the car, bring the signed title or bill of sale along with your ID. For a company or fleet vehicle, we need written authorization from the business plus the driver's ID. If the car belongs to a family member, the registered owner should be present or provide signed permission and a copy of their ID. Rental vehicles go through the rental company.