2013 Scion iQ Key Replacement

2013 iQ key specs

Every US iQ uses a conventional ignition and a three-button remote-head key with lock, unlock and panic, from the same Toyota key family as the xD and Yaris. The blade is cut on the TOY43 profile. Many US-market cars were built without an engine immobilizer, so a correctly cut key can start the car, but listings for 2014-2015 cars show a G-chip key that has to be programmed if your car reads it. Replacement remote-head keys come in chipped and chipless versions, and the FCC ID on your key tells us which one fits.

What's specific to the 2013 iQ

The 2013 Scion iQ is the second of 4 model years in the iQ AJ10 (only generation) (2012–2015), so it shares its key system with the rest of that run, which makes replacement parts easy to source.

At roughly 13 years old, a 2013 Scion iQ has usually seen real wear. Ignition and door cylinders on high-mileage cars wear along with the key, so we cut new keys to factory code rather than copying a worn key. Fob cases crack, buttons wear through and solder joints loosen at this age, so a new shell or a replacement remote often beats repairing the old one. Many have changed hands more than once, so erasing keys you can't account for is worth doing during the visit.

Key options for the 2013 Scion iQ

• Remote head key. Remote-head keys look similar across many vehicles, but the electronics inside are not interchangeable. Getting the right one for a Scion iQ means matching the FCC ID and part number printed on the back or inside the case, the operating frequency, which is commonly 315 MHz on US-market cars, the transponder type, and the button layout. A trim with remote start or a power liftgate may use a four- or five-button version where a base trim uses three. We check those details against your VIN and your existing key, if you have one, before cutting the blade. A wrong match can look perfect and still refuse to program.
• Basic mechanical key. Before treating a Scion iQ key as purely mechanical, we confirm it. Some keys look like plain metal with a rubber or plastic head yet hide a transponder inside, and immobilizers arrived on different trims and model years at different times. If yours truly has no chip, the new key is cut and then tested in the doors, ignition, glove box and trunk where those locks exist. Mechanical blades also show up on newer vehicles as valet keys and as the emergency insert tucked inside a smart fob. Those blades still matter: they're how you get in when a fob battery dies, so they deserve the same careful cutting.

How the Scion immobilizer works on the iQ

Scion was Toyota's youth brand from the 2004 through 2016 model years, so most Scion key systems are Toyota systems underneath, and the last few came from partners. What surprises owners is how uneven the immobilizer picture is. The tC is the Scion where a transponder immobilizer is the norm: a Texas 4D-67 chip through 2010, then Toyota's 80-bit G chip from about 2011. The low-priced boxes and hatchbacks are different. Parts catalogs list their remote keys in versions with and without anti-theft, and installer reports say many US xAs, xBs, xDs and iQs have no immobilizer at all, so a plain cut key starts them. Canadian-market versions should read a chip, because Canada has required immobilizers on new cars since 2007. The final three Scions broke the pattern. The Subaru-built FR-S uses a Toyota G chip in a four-button remote-head key, with a smart fob on its push-button editions. The iA is a Mazda2 sedan with Mazda's push-button smart key and NXP Hitag Pro fob, and the iM, a European Auris, uses a 128-bit Toyota H (8A) flip key. Because the same badge hides such different systems, we start every Scion job by checking your key and the car itself.

• Remote-head keys for the iQ are listed under FCC ID MOZB41TG on earlier cars and MOZB52TH, a G-chip part shared with the tC, on 2014-2015 cars.
• An unmarked Toyota blade, with no dot or G stamp, suggests your iQ key has no transponder.
• The iQ was never sold as a Toyota in the US, so parts catalogs list its keys only under Scion.

Programming a 2013 iQ key

For a US iQ without an immobilizer, a spare is a cutting job plus remote pairing: we duplicate or code-cut the blade, decode the door lock if no key is left, and add the remote through Toyota's on-board routine or a programmer. An iQ that reads a chip, including Canadian imports, gets its key registered through OBD-II, with an immobilizer reset if all keys are lost. We test a cut key on your car first so the quote covers only the steps it needs.

Lost every key to your iQ?

1. Gather your documents and the VIN. Call with the year, make, model and VIN if you can read it through the windshield, plus where the car is parked. Those details let us confirm whether your Scion iQ can be done on-site and bring the right key, so the first trip is the only trip.
2. Get into the vehicle without damage. Entry comes before key-making because we need access to the ignition, the OBD-II port and sometimes the documents in the glove box. We take care with weather stripping, door frames and paint, and we confirm the dash VIN matches your registration before going any further.
3. Originate a new key from the car. With no key to copy, the cuts come from the vehicle itself. We retrieve the key code through manufacturer channels where possible, or decode a door lock with a pick-decoder tool. Then we cut the blade on our code machine and confirm it turns the lock smoothly.
4. Program the key to the immobilizer. Next, the new key is introduced to the car's security system. Many vehicles allow this through the OBD-II port with a PIN or security procedure. Some all-keys-lost cases require reading a module on the bench, and a few platforms only allow dealer programming, which we'll tell you up front.
5. Erase missing keys and add a spare. A lost key's metal blade can still open your doors even after its chip is erased. If the keys disappeared along with something showing where you live or park, consider rekeying the car's door lock cylinders too. We'll also recommend leaving with two working keys, not one.

Why a spare key pays for itself

• Electronics fail without warning. A fob dropped on concrete, run through the washing machine or soaked at the pool can quit for good. With a second programmed key, that's an annoyance you fix on your own schedule, not a stranded car that needs attention today.
• Two drivers sharing one key is a daily negotiation. A second key lets a partner, teenager or coworker use the vehicle without handing keys back and forth in parking lots, and it means one person losing their key ring doesn't leave the whole household stuck.
• When you sell or trade in the vehicle, buyers and dealers expect two keys. A missing key can come up during an appraisal or a private-sale negotiation, so having both on hand keeps the conversation about the car, not about what it will cost the next owner to replace one.

Dealer or mobile locksmith?

The biggest difference between a dealership and a mobile locksmith is where the work happens. A dealer programs keys in its service bay, so if every key is lost, the car usually has to be towed there, and you work around the service department's schedule and the time it takes to order a key by VIN. Julian's Locksmith brings the cutting machine, key blanks and programming equipment to the car, whether it sits in your driveway, a workplace lot or a parking structure. For a 2013 Scion iQ we can program on-site, that means no tow and no shuttle rides back and forth. The trade-off is real, though: on vehicles where only the dealer can program keys, a tow or appointment may still be necessary, and we'll say so before you spend anything on our visit.

iQ key battery

Battery details for the 2013 iQ: CR2016 (remote-head key). Swap cells one at a time and match each one exactly; if a key still fails with a fresh battery, the board, buttons or programming may be the problem, which we can test on site.

How the job works

1. Identify the exact key your iQ uses. We ask a few quick questions on the phone: the year, whether the car starts with a turn key or a button, how many keys you have left, and whether the remote still works the doors. Then we check the VIN against our programming references so the van arrives with the correct blank or fob, not a close guess.
2. Verify ownership before any work. Before cutting or programming, we compare your government photo ID with the vehicle registration or title and check that the VIN on the paperwork matches the VIN on the dash. If the registration is locked inside, we open the car first, confirm the documents, and only then make the key.
3. Get the key code or decode the lock. A key is cut from a code, not a guess. When the factory code can be retrieved through manufacturer channels after ownership is verified, we use it. When it can't, we decode a door lock with a pick-decoder tool that reads the wafer positions without damaging anything, then work out any missing cuts.
4. Cut the blade on-site. Our van carries a code-cutting machine that handles both traditional edge-cut blades and the laser-cut, side-milled profiles common on newer keys. The blade is cut to the code, then test-fitted in a door lock and the ignition or emergency keyhole to confirm smooth operation before any programming begins.
5. Program the chip, remote or smart key. With the blade done, we connect to the OBD-II port and register the new key with the immobilizer. Depending on the Scion system, this may involve a security PIN, a timed waiting period, or on-board button sequences for the remote. On some vehicles we clone a working key's chip instead, when that's the more reliable path.
6. Test everything and clear out old keys. The last step is a short walkthrough. We show you how many keys the car now recognizes, point out the dead-fob start method for your vehicle, and hand you an itemized receipt. If a spare makes sense, it's simplest to add it during this same visit while the equipment is already connected.

What affects the price of an iQ key

• The type of key. Price follows complexity. The more the key does, the more it costs to replace: brass blade, then chip, then remote buttons, then full keyless entry and push-button start. If your iQ came with different key styles by trim, the one your car actually uses is the one that sets the quote.
• Factory or aftermarket parts. Factory keys and fobs carry the manufacturer's part number and usually the highest parts cost. Quality aftermarket keys use compatible electronics at a lower price and work well on many vehicles. We tell you which options we trust for your car, and where an aftermarket version has known range or fit issues, we steer you to OEM.
• All keys lost or adding a key. Adding a key while a working one is in hand is the simpler job. With every key gone, we may have to open the car, decode a lock to originate the cuts, and run a longer programming routine, so all-keys-lost work takes more time and costs more.
• Blade style and cutting. Traditional edge-cut blades are quick to cut. High-security laser-cut blades, with a groove milled into the side, need a specialized machine and more care, and the blanks themselves cost more. If we have to decode a lock to find the cuts, that adds labor as well.

Call (951) 903-3193 with your VIN and the keys you still have, and we'll quote the job before any work starts.

Common Scion key problems

• Scion remote-head keys often crack where the blade meets the plastic head. The circuit board usually survives, so a new shell with a freshly cut blade can fix it, provided the transponder chip moves across with the board.
• Toyota marks chipped blades with a stamped dot (4D-67), G or H near the head. Replacement remote-head keys for the tC, xB, xD and iQ come in chipped and chipless versions that look alike, so match the stamp and FCC ID before buying one online.
• Inland Empire heat shortens the life of the CR2016 cells used in most Scion remote-head keys. If range drops to a few feet or the buttons work only some of the time, replace the battery before assuming the remote has lost its programming.

Tips from a mobile locksmith

• Learn your car's dead-fob start method now, in the driveway, rather than in a dark parking lot later. Depending on the make, you hold the fob against the start button or place it in a marked pocket in the console. Also find the hidden keyhole on the driver's door handle and practice using the emergency blade.
• Every so often, use the mechanical blade in the driver's door lock. Cylinders that go years without a key can seize from dust and dried grease, and you won't find out until the day the fob dies and the blade is your only way in. A small shot of dry lubricant keeps the lock ready.
• When a key's head cracks or its blade bends, replace it before it fails. A transponder chip can slip out of a split head, and a bent blade can break off inside the ignition or door lock, turning a simple key replacement into an extraction and repair job. Small symptoms are the inexpensive time to act.

Proof of ownership

Before we cut or program a key for any vehicle, we verify that you have the right to it. Please have two things ready: the current registration or the title, and a government-issued photo ID with a matching name. We also check that the VIN on those documents matches the VIN plate on the dashboard. If the registration is locked inside the car, that's fine; we open the vehicle first, check the paperwork in the glove box, and only then make the key. If something doesn't line up, we stop and sort it out before any key is made.

Need a 2013 Scion iQ key?

Locked out, keyless, or just tired of a fob that only works half the time? Julian's Locksmith can help with your iQ in Southern California. Have your registration and photo ID ready, call (951) 903-3193, and we'll give you an honest answer about what we can do on-site and what it will cost before we head your way.