Skip to content
Julian's Locksmith

Upland, San Bernardino County

Rekeying Your House in Upland: What a Full Rekey Covers

Short answer: A full house rekey should reach every exterior keyed lock: the front deadbolt and handleset, the garage-to-house door, the garage side door, back and side doors, keyed patio or French doors, security screen doors and gate padlocks. A casita or shed can join the house key or stay separate. In Upland, we count them with you and quote the whole house first.

House Rekey in Upland, CA — New homeowners receiving keys after a rekey

Keys are only one way into a house. Garage door remotes, the keypad by the garage, smart lock codes, alarm codes, a hidden spare under a fake rock and a realtor's lockbox can all outlast a rekey. That's why our house rekey visits in Upland end with a short checklist: we re-pin every keyed cylinder, then help you clear the garage opener's memory, change keypad and smart lock codes, and retire any hidden spare. When we leave, the ways into your house should match the people living in it, and nothing more.

How this works in Upland

The age of a house shapes its rekey. Homes from the 1920s through the 1940s may still have mortise locks, some of them warded skeleton-key locks that can't be rekeyed in any meaningful way and are better retired in favor of a proper deadbolt. Mid-century ranch houses often have early Schlage knobs that still rekey well, if paint and grime haven't sealed the trim. Tract homes from the 1970s through the 1990s tend to mix brands, Kwikset, Schlage, Weiser and Weslock, so keying the house alike may mean swapping a cylinder or two to a common keyway. Houses built since 2000 usually arrive with builder-grade Kwikset SmartKey or Schlage locks on matching keys, which makes a house rekey quick. Custom homes may have Baldwin or Emtek handlesets whose decorative trim needs careful removal. Telling us when your house was built, and roughly what's on the doors, helps us bring the right pins and the right replacement cylinders to Upland.

Work included on a typical visit

  • Front entry deadbolt and handleset. Most visitors only see the front door, and most keys out in the world were made for it. That makes it the first lock we rekey and the one we test hardest: inside and out, door open and shut, every new key. We also check that the strike plate screws bite into framing, not just the door jamb.
  • Security screen and wrought-iron doors. Security screen doors double the cylinders on an entry: one on the screen door, one or two on the door behind it. A house rekey that skips the screen door leaves an old key working on the first barrier. We rekey or replace that lock and make sure the latch still catches against the frame.
  • Side gates and yard padlocks. A side-gate padlock still on an old key gives anyone holding that key quiet access to your backyard and back door. During a house rekey we either re-pin the padlock to your new key, swap it for a rekeyable model, or suggest a combination padlock if neighbors or gardeners need gate access.
  • Older-house and mortise locks. Many mid-century houses in Upland still run the knobs they were built with. Older Schlage knobs, for example, rekey well once the grime is cleaned out. Where an old lock's parts are no longer available or its keyway can't match the rest of the house, we'll show you a replacement that suits the door's style.
  • Household key plan and spares. The last part of a house rekey is deciding who carries keys. We cut a key for each adult and driver in the house, one spare for a secure spot, and keys for anyone who truly needs regular access. Fewer copies means it takes longer before the house needs rekeying again.

How Upland shapes the job

Inland sun is hard on exterior hardware, and a house rekey in Upland is a good chance to see how yours has aged. West-facing doors and side-gate padlocks bake, finishes crack, lubricant dries and cylinders stiffen. We clean and relubricate with a dry graphite or PTFE product instead of oil, which collects dust. Electronic locks have their own heat problem: batteries wear out sooner, so we check them and suggest replacing them before they fail.

A house from before 1980 has usually had its locks replaced one door at a time, so a house rekey in Upland starts by sorting original hardware from later additions. Early Schlage knobs and mortise cylinders often re-pin well once old paint is cleaned off the trim. Warded skeleton-key locks have nothing to rekey and are better backed by a modern deadbolt. Expect at least one door with only a knob, and a screen door or side gate that still opens for a previous owner's key.

Hillside houses often have several levels of entry: a street-level garage, a lower patio door, a deck stair and a side path with a gate. Each is a keyed opening to count during a house rekey in Upland. Santa Ana winds blow grit into cylinders and slam doors on loose strikes, so we clean the locks we rekey and check that latches catch. Consider leaving a spare with someone who can reach the house if you can't.

Common situations

  • Say a family discovers that the fake rock by the porch, the one with the spare inside, is familiar to half the street, a few former babysitters and at least one contractor. The house rekey retires that key along with every other old copy. This time the spare goes to a trusted relative instead of a rock, and the family adds a keypad on the garage entry.
  • For example, an executor handling a late parent's house books a rekey before the cleanout crew starts. She brings ID and the court's letters showing her authority. Several relatives, a caregiver and a neighbor had keys over the years. We rekey every exterior lock, cut keys for the executor and the cleanout company, and note which doors share a key for the eventual buyer.
  • Imagine a house near Buffalo Inn on historic Route 66 with wrought-iron security screen doors at the front and back, each on its own key, plus two keys for the doors behind them. Four keys for two entrances is a lot to juggle. During the house rekey we re-pin the screen door cylinders to the Kwikset keyway the house already uses, and everything runs on one key.
  • Picture a 1930s Spanish-style house in Old Magnolia with its original mortise lock on the arched front door. The cylinder on the outside is threaded into the lock body and can be re-pinned, so the door keeps its character. The interior skeleton-key locks don't matter for security, and the back door gets a modern deadbolt keyed to the front cylinder.

How the visit works

  1. Walk your house before you call. Pull out every key you own and try each one in each lock during your walk. You'll learn which doors share a key already, which locks have no working key, and whether a mystery key opens something you forgot. Share that with us when you call (951) 903-3193.
  2. Gather proof the house is yours. Someone else meeting us? A spouse or co-owner on title can show their own ID with proof of ownership. If a relative or property manager is meeting us instead, send written authorization ahead of time and have them bring their ID. We'll tell you exactly what's needed when you book.
  3. Walk-through and label every door. The walk-through doubles as a quick security check. We note doors without deadbolts, strikes held by short screws, sliders without a secondary lock and gates that don't latch. None of it is required for the house rekey, but it's good to know while someone experienced is standing at your doors.
  4. Settle the key plan. One key for the whole house is the most common choice, and it's usually possible with a cylinder change or two. A second key makes sense where a tenant, a home business or valuable tools are involved. We write the plan on the work order so it's clear what was keyed to what.
  5. Rekey door by door and test. We work through the house in a logical order, usually front door, garage entry, back doors, then gates and outbuildings. Keys are cut to code on our machine and checked in every lock they should open. Anything unexpected, such as a seized cylinder, is explained and quoted before we continue.
  6. Close the routes keys don't cover. We finish with the paperwork and the keys: an invoice listing every lock rekeyed or replaced, our license number LCO7891, and a note of which doors share which key if you'd like one. Hand out the new keys yourself, and keep the list somewhere you'll find it later.

How we quote the job

  • Age and condition of the locks. Older locks can take longer. Paint-sealed trim, corroded screws and gritty cylinders slow disassembly, and worn pins sometimes need replacing beyond the usual set. If a lock is too far gone to rekey sensibly, we'll recommend a replacement and price it before touching it.
  • Extras around the property. Security screen doors, side-gate padlocks, keyed gate latches, shed doors and privately owned mailboxes all add to a house rekey. Rekeyable padlocks can join your key; cheap ones are usually replaced. A mailbox on a Postal Service cluster box goes through the post office instead.
  • Missing keys and stuck cylinders. Stuck locks are common on rarely used doors such as garage side doors and back gates. Freeing them up takes time and sometimes reveals a cylinder that's past saving. You'll get a clear explanation and a price before we go further, so the house rekey never turns into an open-ended bill.

Every job gets a clear quote before any work starts. Call (951) 903-3193 with the details and we'll tell you what to expect for your situation in Upland.

What to do before we arrive

  • Give the side gate a real lock plan. A padlock on the old key undermines the whole house rekey. Choose between a rekeyable padlock on the house key, a keyed gate latch, or a combination padlock for gardeners and pool service, and change that combination periodically.
  • Think about sliders while you're focused on locks. A standard sliding door latch isn't keyed, so a house rekey won't touch it, but a secondary pin lock or a bar in the track adds real protection. It's an inexpensive fix to handle the same week as the rekey.
  • Photograph every lock face on your house before you call, front and back. The brand name stamped on the cylinder or the key bow tells us the keyway, and the photos let us bring the right parts, especially for an older house with a mix of locks from different decades.
  • Look at security screen doors as their own locks. They often run on a separate key and get skipped. Many accept Kwikset or Schlage keyway cylinders and can join the house key; others need a manufacturer cylinder. Note the brand on the screen door lock when you count.

Common errors that cost time and money

  • Putting the new spare key back under the same rock. If old keys were a concern, the hiding place was probably part of the problem. Give the spare to someone you trust, or use a keypad, rather than hiding a fresh key where everyone already knows to look.
  • Forgetting codes and remotes. A rekey doesn't touch the garage opener, the garage keypad, smart lock codes or the alarm. Former residents and helpers who knew those codes can still get in until you clear the opener's memory and change every code.
  • Replacing every lock in the house when the existing hardware is sound. New hardware costs considerably more than rekeying and doesn't keep out old keys any better. Save replacement for locks that are worn, damaged, missing a deadbolt or simply not the quality you want.

Reaching Upland

Upland is about 24 miles from our San Bernardino base, roughly 30 minutes in light traffic via Belmont and Palm Avenues to I-215 North, I-15 South at the Devore junction. When you call, you get an arrival estimate based on where the technician is and the traffic at that moment.

Stuck on the shoulder or in a parking lot along Foothill Boulevard? Get somewhere safe, turn on your hazards, and give us the nearest exit or business so we can find the car without guessing.

About Upland: Euclid Avenue, from Philadelphia Street in Ontario to 24th Street in Upland, was added to the National Register of Historic Places in 2005.

NeighborhoodsEuclid Avenue Historic District, North Upland, West Upland near Cable Airport, Old Magnolia, Upland Hills Estates, Central Upland
ZIP codes91784, 91786
Main routesI-10, SR-210, Foothill Boulevard, Euclid Avenue
From our San Bernardino baseabout 24 miles via Belmont and Palm Avenues to I-215 North, I-15 South at the Devore junction, then SR-210 West (Foothill Freeway) to the Campus Avenue or Mountain Avenue exits; for south Upland and downtown, I-15 South to I-10 West and the Euclid Avenue or Mountain Avenue exits

Planning a rekey in Upland?

Call (951) 903-3193 and tell us how many doors you want on the new key and the brand of the locks if you know it. We'll quote the rekey before any work starts.

Frequently asked questions

Does a house rekey cover the garage opener and keypad?

No. Rekeying changes keyed cylinders only. Your opener still answers every remote ever paired with it, and the outdoor keypad keeps its old code, until you reset them. On most openers, holding the Learn button on the motor unit until its light goes out erases the remotes, and then you re-pair the ones you're keeping. We walk you through that and the keypad code at the end of the visit.

Do I still need a house rekey if I have a smart lock?

Probably, yes. A smart lock handles one door, and most have a key cylinder we can re-pin. The garage entry, back door, gates and any screen doors are still on old keys unless you've changed them. The codes and app users on the smart lock need a review as well. A house rekey covers the key side of every door and tidies up the electronic side of that one.

Can every door share one key if my locks are different brands?

A key fits only locks that share a keyway, so mixed brands need a little planning. Usually we rekey the brand that covers most doors and swap a cylinder, or replace a whole lock, on the odd ones so everything matches. Some mismatched locks are cheaper to replace outright. We lay out the options door by door during the walk-through, so you can pick the combination that reaches one key at the lowest total.

How long does a house rekey take?

Most single-family houses are finished in one visit, and the time follows the number of cylinders and their condition. Matching newer locks go fastest. Older hardware, mixed brands, a stuck cylinder or a lock with no working key slow things down, and we tell you when that happens. We re-pin one cylinder at a time so the house is never left with an open door, then walk it with you to test every key.

Can the casita or workshop have its own key?

Yes, and for a rented casita or a workshop with valuable tools it's the better plan. We split the property into zones, rekey each zone to its own key and cut keys to match. If you want one owner key that opens every zone, that takes a master-keyed setup, which needs more planning and works only on hardware that supports it. Mention it when you call and we'll bring the right parts.

Can you rekey the side gate and pool gate?

Side gates with keyed latches or rekeyable padlocks can join your house key. A pool gate is more particular: it has to close and latch by itself, and we don't change that function. If the gate has a keyed latch we can re-pin, we will and then test the latch. If it's a cheap padlock on a hasp, we replace it with a rekeyable one. Either way, the gate must still close without help.

How far is Upland from your base?

Upland is about 24 miles from our San Bernardino base, roughly 30 minutes in light traffic. Arrival time depends on traffic and on the job the technician is finishing, so we give you an estimate on the phone before you commit.

House Rekey in nearby cities

From the blog

Call now(951) 903-3193

Daily 6:30am–11:30pm