Rekey Locks after Buying a House in Rialto, Before You Unpack

How this works in Rialto

It helps to be clear about what a rekey does and doesn't do. Rekeying changes who can operate a lock. It doesn't make the lock stronger, the door thicker or the frame harder to kick in. If the deadbolt on your new home is an entry-level Grade 3 model held by short strike screws in a soft jamb, fresh pins won't change how it handles a shoulder or a pry bar. That's why a good post-purchase visit looks past the cylinder. We check whether each exterior door has a deadbolt at all, whether the bolt fully extends into the strike, and whether the strike screws reach the stud behind the jamb rather than stopping in thin trim. We look at glass near each lock, since a pane within arm's reach of a thumbturn changes the advice. For buyers who want more than a key change, the next steps are clear: security pins that resist picking and bumping, Grade 1 or Grade 2 hardware on the main entry, reinforced strikes, and restricted keyways that stop copies from being cut at any hardware counter. None of it is required. We'll explain which upgrades suit your doors and budget, then rekey the rest.

How we can help in Rialto

• Whole-house rekey on possession day. We rekey every keyed cylinder in one visit, so the house goes from an unknown number of keys to only yours in a single appointment. That includes front, back, side and garage entry doors, plus keyed patio handles. You get fresh keys cut on site and can request as many copies as your household needs.
• Keying the whole house alike. Many buyers inherit a ring with four or five different keys. During the rekey we can set every lock to one combination, so a single key opens the front deadbolt, garage door, back door and gate. Where locks use different keyways, we'll explain the options for getting everything onto one key.
• Gates, sheds and outbuildings. If your new property includes a detached garage, RV gate, pool equipment enclosure or tool shed, those locks share the same key-history problem. We bring them under your new key, or a second key for areas you want kept separate, such as a workshop you'd rather guests and contractors couldn't open.
• Mailbox lock change. A previous owner's mailbox key is a quiet risk, since mail carries bank statements and new cards. We replace locks on standalone locking mailboxes and on privately owned cluster box compartments so only your keys work. If your cluster box is owned by the postal service, the local post office handles the lock change instead.
• When the seller's keys don't fit. Damaged and high-security cylinders are the exception. A lock that was drilled, jammed or fitted with a patented keyway may not open cleanly, and occasionally drilling is the honest answer. We'll tell you before doing it, explain the replacement, and still leave every door on your new key before we pack up.

Local factors in Rialto

Long commutes shape how you rekey. Many buyers in Rialto leave before dawn and get home after dark, so the house sits empty most of the day. We start at 6:30 a.m. every day and work until 11:30 p.m. That makes a before-work or evening rekey realistic. Since the garage entry is often your everyday front door, that lock gets extra attention, and a keypad deadbolt can spare you a lockout at five in the morning.

Family neighborhoods mean school schedules, carpools and a lot of people who may have held the previous owner's keys: babysitters, grandparents, coaches dropping kids off. After you buy in Downtown Rialto, rekeying gives you a clean slate before your own kids start getting keys. Many families pair it with a keypad deadbolt so children never carry a key that can be lost at school.

Inland heat bakes exterior locks. Lubricant dries, pins gum up, and keypads on sun-facing doors wear out faster. When we rekey after a purchase in Rialto, we clean and lubricate each cylinder with a dry graphite or PTFE product rather than oil that attracts dust, replace tired springs, and check keypad batteries, which hot weather drains faster than many owners expect.

Situations this covers

• For example, a couple closes on a 1960s single-story home in El Rancho Verde, and the seller's agent hands over three different keys plus a garage remote. During the walk-through we'd find a Kwikset front deadbolt, a Schlage knob on the garage entry door and a padlock on the side gate. A typical plan: re-pin what matches, swap the odd cylinder, and leave them with one key for every door.
• Consider a buyer who purchases a duplex near Tom Sawyer Pool, moves into one side and inherits a tenant in the other. Their own unit can be rekeyed the day they take possession. The tenant's unit is different: a typical plan is giving proper written notice, rekeying at the agreed time, handing the tenant new keys on the spot, and confirming the main door has a working deadbolt.
• Here's a common one on larger lots: a ranch-style property with a detached garage, a tack room or workshop, and a long driveway gate. The seller leaves a coffee can full of unlabeled keys. We'd sort which keys fit which locks, rekey the house to one key, put the outbuildings on a second, and recommend replacing padlocks that have rusted beyond saving.
• Say you buy a newly built home and assume the locks are pristine. Builders often use construction keying, where the crew's key is supposed to quit working after your first key turns. A locksmith would test each cylinder with the construction key if one is available, confirm the change took, and rekey anything that didn't. It's a short visit that replaces assumption with certainty.

From your call to the finished job

1. Book around your possession date. When you call, have the property address, your possession date and a rough count of exterior doors ready. Photos of each lock face, including the brand stamped on the deadbolt, let us stock the van with the right pins and cylinders. We work every day, 6:30 a.m. to 11:30 p.m.
2. Bring proof of ownership. If someone else will meet us, such as a spouse who isn't on title, a relative or a property manager for an out-of-area buyer, they need the owner's written authorization plus copies of the ownership documents. We may also call the owner to confirm. It's a little extra effort, and it's the same check we'd want for our own homes.
3. Walk the property and count cylinders. Before quoting, we inventory the house. Each keyed cylinder gets checked for brand, keyway, wear and whether it can join a keyed-alike set. We also note keypads, smart locks and any high-security cylinders. You see the full list and price, and you decide what's rekeyed, replaced or left for later.
4. Re-pin each cylinder. We remove each cylinder, push out the old pins, and load a new combination using our key gauge and pinning kit, matched to the fresh key we've cut. Master pins aren't needed in a single-family house, which keeps the locks simpler and harder to manipulate. Then each cylinder goes back exactly as it came out.
5. Reset codes and test every key. Before we pack up, every door gets a full function test: the key turns smoothly, the deadbolt throws completely into the strike, and the latch catches when the door closes. Electronic locks get new codes and fresh batteries if needed. Anything that didn't pass gets fixed or flagged on the invoice for a follow-up.
6. Hand over the keys and the record. The visit ends with keys in your hand and a clear record of the work. Keep it with your closing papers. It lists the locks we handled and the keying, which makes later additions, like a new smart deadbolt, easy to match. Then reset the garage remotes and you're done.

What affects the cost

• Lock condition. Older hardware can fight back. Stripped screws, broken tailpieces and cylinders that won't release from the housing all add labor. Bargain locks from a hardware aisle sometimes cost more to service than to replace. We note the condition of each lock up front so the quote reflects what's actually on your doors.
• Number and type of new keys. The number of copies matters less than the type. Standard KW1 or SC1 copies are inexpensive to cut from our van; patented and restricted keys involve controlled blanks. Think through who genuinely needs a key, since fewer copies in circulation is the whole point of rekeying after a purchase.
• Scheduling and location. Bundling saves a return trip. If you plan to add a deadbolt to the garage entry, install a smart lock or replace a failing patio handle, doing it during the rekey means one visit instead of two, and travel is part of every quote. Splitting the work across separate appointments is fine too, but each trip adds to the total.

Every job gets a clear quote before any work starts. Call (951) 903-3193 with the details and we'll tell you what to expect for your situation in Rialto.

What to do before we arrive

• Factory-reset every smart lock instead of just deleting users in an app. A reset removes the previous owner's account access and any shared guest codes. Then set up your own account, create a strong master code and rekey the backup cylinder, since that key may still be sitting in someone's junk drawer.
• Erase the garage door opener's memory using the learn button on the motor unit, then reprogram only your own remotes and car buttons. Change the exterior keypad code too. A seller's old remote clipped to a visor, or a code shared with a landscaper, can open the big door long after the locks are rekeyed.
• Ask your agent to collect every key, remote and code from the sellers before closing, and to note how many there are. It won't make rekeying unnecessary, since nobody can account for copies made at a hardware store, but it tells you which locks exist and whether any are high-security.
• Check that the garage entry door and every exterior door has a real deadbolt with a one-inch throw and a strike plate secured by long screws that reach the framing. If a door only has a knob lock, move-in week is a sensible time to add a deadbolt alongside the rekey.

Common errors that cost time and money

• Ignoring codes and electronic access. A rekeyed deadbolt with the seller's keypad code still active, or a smart lock still linked to their app, leaves the door open to them. The same goes for garage remotes and alarm codes. Reset everything programmable on the same day the keys change.
• Replacing perfectly good locks when rekeying would do. If the hardware works smoothly and you like how it looks, new pins and keys solve the access problem for much less. Replacement makes sense for worn, damaged, low-grade or mismatched locks, or when you want a smart lock upgrade.
• Assuming the sellers handed over every key. They gave you the keys they could find. Copies made years ago for a babysitter, a contractor or a neighbor are almost never accounted for, and lockbox access during the sale added more people. Rekeying is the only way to know the count is zero.

Getting to Rialto

Rialto is about 10 miles from our San Bernardino base, roughly 17 minutes in light traffic via Palm Avenue to I-215 South. When you call, you get an arrival estimate based on where the technician is and the traffic at that moment.

Rush hour on Alder Avenue can stretch a drive considerably. We'd rather give you a realistic arrival window than an optimistic one, and we'll call you if a closure or a crash changes the plan.

About Rialto: The Semi-Tropic Land and Water Company laid out the Rialto townsite in 1887 along the new Santa Fe line, and the settlement took its name from the Rialto Bridge in Venice.

Planning a rekey in Rialto?

Call (951) 903-3193 and tell us how many doors you want on the new key and the brand of the locks if you know it. We'll quote the rekey before any work starts.