Rekey Locks after Buying a House in Bloomington, Before You Unpack

What to expect in Bloomington

Keys are only half of a modern home's access. A keypad deadbolt may still open with the seller's code, or with codes they gave a cleaner years ago. A smart lock such as a Schlage Encode, Kwikset Halo or August may still be linked to the previous owner's app account, which means they could operate it remotely; a factory reset clears that. Garage door openers keep learned remotes and keypad codes until someone erases them at the opener's learn button. We handle the lock side, resetting keypad codes and smart lock pairings, and we'll point out the rest so nothing gets missed. The alarm company needs a call to change master codes, and the HOA handles pool and gate fobs. Expect us to ask for proof that the house is yours. Because your driver's license won't show the new address yet, a photo ID with your closing statement, grant deed or escrow documents works. That check is how we make sure we're helping the buyer, not someone who simply happens to be standing on the porch.

Work included on a typical visit

• Keying the whole house alike. Keyed alike means one key for every exterior door, and it's easy to add while the cylinders are already apart. If your house mixes Kwikset and Schlage hardware, we can re-pin the compatible locks and swap or replace cylinders on the outliers. Fewer keys on the ring means fewer copies floating around.
• Garage entry and side door locks. The door from the garage into the house is the one buyers forget and burglars appreciate, since an old opener remote can lift the big door and expose it. We rekey that knob or deadbolt with the rest, and we'll tell you if it lacks a deadbolt and would benefit from adding one.
• Gates, sheds and outbuildings. Pool gates add a safety wrinkle. They need to keep closing and latching on their own, and a stiff keyed latch or a padlock hung through the hasp can quietly defeat that. When we bring a pool gate onto your new key, we check that it still self-closes and self-latches, and suggest keyed latch hardware that preserves both functions.
• Lock condition check and upgrades. While each cylinder is out, we look at what most buyers can't see: worn pins, loose deadbolt screws, short strike screws, sticky latches and frames that don't line up. You get a straight answer on which locks are fine to rekey and which are worth replacing or upgrading, with a quote for each.
• Security screen doors and iron gates. Wrought-iron courtyard and side gates take a beating from sun, sprinklers and slamming. Their locks are often rim or mortise gate locks, or keyed levers mounted in a weld-on box. We service, rekey or swap those cylinders to match the house, and replace gate hardware that has rusted past the point of latching reliably.

Local factors in Bloomington

Horse properties add tack rooms, feed storage and arena gates to the list, and previous owners may have given keys to farriers, trainers and boarders. When you buy one, rekeying the house is the start; securing tack and equipment is the next step, since saddles and tools are tempting targets. We can key barn areas alike for staff while keeping the residence on its own key.

Inland heat bakes exterior locks. Lubricant dries, pins gum up, and keypads on sun-facing doors wear out faster. When we rekey after a purchase in Bloomington, we clean and lubricate each cylinder with a dry graphite or PTFE product rather than oil that attracts dust, replace tired springs, and check keypad batteries, which hot weather drains faster than many owners expect.

Long commutes shape how you rekey. Many buyers in Bloomington leave before dawn and get home after dark, so the house sits empty most of the day. We start at 6:30 a.m. every day and work until 11:30 p.m. That makes a before-work or evening rekey realistic. Since the garage entry is often your everyday front door, that lock gets extra attention, and a keypad deadbolt can spare you a lockout at five in the morning.

Common situations

• Consider a bank-owned home off Santa Ana Avenue bought as a first house. The preservation company changed the locks at foreclosure, likely to a code shared across many properties, and the lockbox was opened by every agent who showed it. In a case like this, rekeying every exterior lock, plus checking for broken latches left over from the vacancy, would be the first job before anything else.
• Suppose you buy a townhome in an HOA community. Your unit's front door and patio gate are yours to rekey, but the pool gate, mailbox units and common doors usually belong to the association. We'd rekey your unit, change your mailbox compartment lock if the HOA allows it, and point you to the management office for pool and gate fobs.
• Suppose escrow closes and the ring from the agent opens the front deadbolt but not the side door or the door from the garage. Maybe a seller swapped those locks years ago and kept the keys in a drawer that left with them. After checking your ID and closing papers, a locksmith would open the two odd locks, read their pins, and bring all three doors onto one new key.
• Imagine buying a home whose sellers had a Kwikset keypad deadbolt on the front and a Wi-Fi smart lock on the back door. The keypad still opens with their code, and the smart lock still shows up in their app. We'd clear every stored code, factory-reset the smart lock, pair it to your phone, and rekey both backup cylinders to your new key.

From your call to the finished job

1. Book around your possession date. When you call, have the property address, your possession date and a rough count of exterior doors ready. Photos of each lock face, including the brand stamped on the deadbolt, let us stock the van with the right pins and cylinders. We work every day, 6:30 a.m. to 11:30 p.m.
2. Bring proof of ownership. Since your license won't show the new address yet, bring photo ID plus a closing statement, grant deed, escrow instructions or similar documents in your name. If the deed hasn't recorded yet, escrow paperwork showing the close is fine. We check this before touching any lock; it protects you as the new owner.
3. Walk the property and count cylinders. Before quoting, we inventory the house. Each keyed cylinder gets checked for brand, keyway, wear and whether it can join a keyed-alike set. We also note keypads, smart locks and any high-security cylinders. You see the full list and price, and you decide what's rekeyed, replaced or left for later.
4. Re-pin each cylinder. Your new combination comes from a fresh code, not a variation on the seller's key. We cut keys on a code machine to the manufacturer's depth and spacing specifications, keeping neighboring cuts within the allowed limits so the key turns smoothly and doesn't wear early. Kwikset SmartKey cylinders are reset with their own tool instead of loose pins.
5. Reset codes and test every key. With the pins done, we clear keypad codes, factory-reset smart locks and pair them to your phone. Then we test every new key in every lock, from inside and outside, with the door open and closed. A key that turns stiffly gets corrected now, not discovered when you're standing on the porch with groceries.
6. Hand over the keys and the record. The visit ends with keys in your hand and a clear record of the work. Keep it with your closing papers. It lists the locks we handled and the keying, which makes later additions, like a new smart deadbolt, easy to match. Then reset the garage remotes and you're done.

What affects the cost

• Number of cylinders. The count drives most of the price. A starter condo might have two keyed locks; a larger home with a garage entry, side door, patio handle, gate and shed may have eight or more. A deadbolt and a knob on the same door are two cylinders. We count them with you before quoting.
• Mixed brands and keyways. Off-brand and import locks are the wild card. Some use keyways for which pins and blanks are hard to find, and some cylinders can't be removed without breaking the housing. In those cases, a new Kwikset or Schlage lock often costs less than the labor of forcing an odd cylinder onto your key. We'll quote both paths side by side.
• Number and type of new keys. Your quote spells out how many new keys come with the job, and extra copies are cut on site. Households with several drivers, kids, a housekeeper or a trusted neighbor often need more. Restricted or high-security keys cost more per copy than standard ones. Decide how many you need beforehand and we'll cut them in one go.

Every job gets a clear quote before any work starts. Call (951) 903-3193 with the details and we'll tell you what to expect for your situation in Bloomington.

Practical tips before you call

• Schedule the rekey before movers arrive. Once boxes and furniture are inside, you're protecting more behind locks whose key history is unknown, and moving day itself brings helpers through every door. Even a morning appointment on possession day, before the truck shows up, closes that gap.
• If you plan a remodel, give contractors a temporary key and plan to rekey once they're finished, or install a keypad lock whose code you can delete. Rekeying twice costs less than wondering how many copies a crew made, and good contractors won't be offended by it.
• Skip the address tag on your new key ring. A lost ring labeled with a street address is an invitation, and a ring labeled 'front door' tells a finder exactly what it opens. Colored key caps or a simple shape code do the same job for your household without telling a stranger anything useful.
• Test each deadbolt with the door closed. If you have to push, pull or lift the door before the bolt will throw, the strike is out of line, and the bolt may not be fully extended even when it feels locked. A small strike adjustment fixes it, and a bolt that seats completely is far harder to force back.

What not to do

• Hiding a spare outside the same week you rekey. A fake rock or a key on top of the door trim is the first place anyone looks, and it hands a stranger the very access you just paid to remove. Give a spare to someone you trust, or use a keypad code you can delete.
• Replacing perfectly good locks when rekeying would do. If the hardware works smoothly and you like how it looks, new pins and keys solve the access problem for much less. Replacement makes sense for worn, damaged, low-grade or mismatched locks, or when you want a smart lock upgrade.
• Tackling a DIY rekey kit on a mix of brands without knowing what you have. Kits are brand-specific, Kwikset SmartKey cylinders need their own tool, and springs lost under a sofa end many weekend projects. A locksmith visit handles every brand at once and leaves each lock tested.

Reaching Bloomington

Bloomington is about 14 miles from our San Bernardino base, roughly 22 minutes in light traffic via Belmont Avenue and Palm Avenue to I-215 South, SR-210 West to the Riverside Avenue exit. When you call, you get an arrival estimate based on where the technician is and the traffic at that moment.

If you're close to Bloomington Avenue, tell us which exit or cross street you're nearest. It trims the last mile and keeps the van from circling a block that looks right on the map but isn't.

About Bloomington: With no city government, Bloomington is patrolled by the San Bernardino County Sheriff's Fontana Station and the California Highway Patrol, and San Bernardino County Fire provides fire protection.

Planning a rekey in Bloomington?

Call (951) 903-3193 and tell us how many doors you want on the new key and the brand of the locks if you know it. We'll quote the rekey before any work starts.