Same Key for All House Locks in Colton, Matched Door by Door

What to expect in Colton

A typical Colton house has more keyed points than people count at first. The front entry usually carries a deadbolt plus a knob or handleset, and both count. Then come the back or kitchen door, the door between the garage and the house, a garage side door, and sometimes a steel security screen door with its own deadbolt. Outside, there may be a keyed side gate latch, a padlock on the trash enclosure or pool equipment, and a shed. Most of those can share one key if their cylinders are standard and rekeyable. A few usually can't. Sliding patio doors rarely have an exterior cylinder worth matching, the T-handle on an overhead garage door is typically a wafer lock on its own key, and individual mailbox locks belong to a different system altogether. Blister-pack padlocks generally can't be re-pinned, though a rekeyable padlock that takes your house keyway, where one exists for your brand, can replace one. We walk the property with you, mark each lock as in, out or replace, and quote that list before starting, so no surprise second key turns up later.

Work included on a typical visit

• Rekeying same-brand locks to one key. If every lock on your house shares a keyway, this is the whole job. We pull each cylinder, replace the key pins to match a single new key cut by code, and reinstall it. The deadbolt, knob, back door and garage entry all end up on one key, and every old copy floating around stops working the same afternoon.
• Smart locks and keypads on the house key. Keypad and app locks still have a key cylinder for dead batteries, and that cylinder can usually share your house key. Kwikset's Halo and SmartCode models use SmartKey on the KW1 keyway; Schlage's Encode and Connect models take a Schlage C cylinder. We re-pin or reset that backup cylinder so the emergency key matches everything else.
• Security screen door deadbolts. Security screen doors in Colton take a beating from afternoon sun, slamming and dust. Before we rekey the lock to your house key, we check that the bolt throws fully into the frame and that the cylinder isn't packed with grit. A gritty cylinder gets cleaned and treated with a dry lubricant so the new key turns easily.
• Garage entry and side door locks. The door from the garage into the house is one burglars like, because a stolen remote or a forced side door gets them into the garage unseen. That lock deserves the same attention as the front door. We rekey it, along with any garage side door, to your one key and check that both deadbolts throw fully.
• Cutting and testing your new keys. Your new keys are cut by code on a machine in the van, not traced from an old worn key, so every copy matches the pinning exactly. We test each one in every lock before handing it over, turning the deadbolt with the door closed against the strike, where a marginal key tends to show itself.

What's different about Colton

If you leave before dawn and return after dark, fumbling through keys at an unlit door is a daily annoyance. One key for every door lets you lock the back door, the garage entry and the front in seconds. Since our hours start at 6:30 a.m. every day, we can often schedule the rekey before you head out on Pepper Avenue or as you get home.

Apartment renters can rarely change locks without permission, and many complexes rekey units themselves between tenants. If your Colton apartment has a deadbolt and knob on different keys, ask management to key them alike at the next rekey. If they approve a private locksmith, get it in writing and give the office a copy of the new key, since leases usually require one.

Foothill homes often have more exterior doors than flatland houses: walkout lower levels, side doors onto decks and gates on steep paths. In wildfire country there's another reason for one key. When an evacuation order comes and you're grabbing what you can, a single key that locks every door is one less thing to sort out on the way down the hill.

Example situations

• For example, a couple closes on a 1970s single-story in Cooley Ranch and receives seven loose keys from the seller. Four turn out to be duplicates, two open nothing, and one works the side door only with a hard jiggle. We'd rekey the front deadbolt, knob, back door, garage entry and side door to one new key, replace the worn side-door cylinder, and cut four copies.
• For example, a house off Agua Mansa Road has a steel security screen door whose deadbolt uses a different key from the wood door behind it, so every trip inside takes two keys. After confirming the screen door's cylinder is a standard KW1 type, we'd rekey it and the entry deadbolt to the same new key, then adjust the screen door's strike, which had been catching on every close.
• Picture a grandmother who's started having trouble telling her keys apart, especially at dusk. Her family asks for one key across the house. We'd rekey the front, back and garage doors to match, cut a key with a large rubber head that's easy to grip, and check that each deadbolt turns with light pressure, adjusting a strike that had been forcing her to shove the door.
• A typical situation: a family with a casita rented to a graduate student wants one key for the main house but needs the casita kept separate. We'd key the main house doors, garage entry and side gate alike, set the casita on its own key, and suggest the owners store their copy of the casita key away from the everyday ring.

From your call to the finished job

1. Send photos and a count of your locks. Walk the house before you call and count every keyed lock you use, including the garage entry, side door, security screen door and gate. A knob and a deadbolt on the same door count separately. A realistic count lets us give an honest estimate and plan enough time on-site.
2. Gather a working key for each lock. Before we arrive, find a key that opens each lock, even if it's a worn copy. With a working key, the plug comes out in moments. Without one, we pick or otherwise open the cylinder first, which adds time but is usually still cheaper than replacing the lock.
3. Verify ownership and confirm the plan. On arrival we verify that you own or live in the home, usually with ID and something showing the address. Then we walk the doors together, mark each lock as rekey, replace or leave out, and confirm the price before any cylinder comes off a door.
4. Pick the new key combination. If some doors use six-pin cylinders and others five, we choose a combination that works across both. Where brand differences remain, the replacement hardware gets keyed to the same new combination before it goes on the door, so everything matches from the first turn.
5. Rekey and reinstall each cylinder. As each cylinder comes apart, we look for worn pins, debris and broken springs, and replace what's tired. A lock that comes off the door rough goes back smooth. Any replacement hardware goes in at this step, keyed to match, with strikes adjusted so bolts throw cleanly.
6. Test every door and hand over the keys. The last step is a key count. Write down who holds each copy, keep one spare somewhere secure, and never label it with your address. If a key ever goes missing, you'll know how many are out and whether the house needs rekeying again.

What affects the cost

• Smart lock and high-security cylinders. High-security cylinders from Medeco, Mul-T-Lock or similar makers use patented keys and special pins, so keying them alike with the rest of the house means either fitting high-security cylinders on every door or leaving those doors on their own key. Both are possible; the first costs considerably more.
• Missing keys and stuck locks. A working key for each lock keeps the job simple. A lock with no key has to be opened first, by picking or decoding, before it can be rekeyed. That's usually still cheaper than replacing it, but it adds labor, so let us know in advance which locks have no key.
• Timing, travel and combined work. A planned one-key rekey costs less than an urgent one because we can schedule it efficiently and bring exactly the right parts. If you're moving in, booking the day you get keys works well. We're open every day from 6:30 a.m. to 11:30 p.m.

Every job gets a clear quote before any work starts. Call (951) 903-3193 with the details and we'll tell you what to expect for your situation in Colton.

Practical tips before you call

• Consider giving workers a code instead of a key. A keypad deadbolt on a side or garage door lets a cleaner, pet sitter or contractor in without handing over the one key that opens everything, and you can delete the code the day the job ends.
• Treat a lost house key as a whole-house event once everything shares it. If that key disappears somewhere it could be linked to your address, rekey every lock it opened, not just the front door. That's the trade-off for convenience, and it's the same straightforward job as before.
• Check that each deadbolt turns easily with the door closed. If you have to push or pull the door to throw the bolt, the strike is misaligned. Get that fixed during the visit, because a dragging bolt strains the key, and with one key in use everywhere, a bent key affects every door.
• Keep your spare with a trusted neighbor or in a lockbox you control, not under a mat, in a fake rock or on top of the door frame. With a single key running the whole house, a hidden spare that a stranger finds is a key to everything you own.

Mistakes to avoid

• Assuming a smart lock removes the need for a matching key. Every keypad with a backup cylinder still has a physical key, and dead batteries are a real possibility. If that cylinder isn't keyed to the house, you'll be hunting for a separate key at the worst possible time.
• Giving copies of the one key to every contractor, cleaner and neighbor who asks. Each copy opens every door you own. Track who has keys, use keypad codes or a separate key for limited access, and collect copies when the work ends.
• Buying a new lock combo pack and assuming it'll match the locks already on the house. Factory packs are keyed alike only within the box, or to other boxes printed with the same keying code. Unless the new lock gets rekeyed to your existing combination, you've just added another key to the ring instead of removing one.

Service in Colton

Colton is about 11 miles from our San Bernardino base, roughly 17 minutes in light traffic via University Parkway to I-215 South through San Bernardino. When you call, you get an arrival estimate based on where the technician is and the traffic at that moment.

Stuck on the shoulder or in a parking lot along Washington Street? Get somewhere safe, turn on your hazards, and give us the nearest exit or business so we can find the car without guessing.

About Colton: The 2020 census counted 53,909 residents in Colton, and the Census Bureau's 2024 estimate put the population at 53,528.

Planning a rekey in Colton?

Call (951) 903-3193 and tell us how many doors you want on the new key and the brand of the locks if you know it. We'll quote the rekey before any work starts.