How to Rekey All House Locks in City of Industry in One Visit

What to know first in City of Industry

Before the first pin comes out, decide how the finished house should be keyed. The simplest plan puts every exterior lock on one key, which is what most families want. But a whole-house rekey is also the cheapest moment to build in exceptions. You might keep a detached office or storage room on its own key, give a gardener a key that opens only the side gate, or set up a small master arrangement where your key opens everything and an ADU occupant's key opens only their door. Each separate key adds a little cost and something to keep track of, so the goal is the fewest keys that still match how your household actually uses the property. Making those choices first matters because changing the plan later means pulling and re-pinning cylinders a second time. We sketch the plan with you on paper, door by door, before quoting, so the price you approve reflects the keys you'll really carry.

Work included on a typical visit

• Whole-property lock inventory. We check places people forget: the knob under each deadbolt, the door from the garage into the house, a keyed screen door, side and RV gates, a casita, a home office with a keyed lever. If a lock takes a key, it goes on the list, even if you've never used it, because someone else might have that key.
• Re-pinning every exterior door. For a whole house, we pin every cylinder from a single key code, so all the locks on the plan accept exactly the same key. The old pins go in the trash rather than back into stock. While each plug is out, we clean the cylinder and replace weak springs, so locks often feel better afterward.
• Garage access points. Garage keys are the ones most often lent out, to a gardener, a contractor storing tools, a relative borrowing the truck. That's why a whole-house rekey that skips the garage side door or the garage-to-house door misses the point. Both go on the list, keyed to match the house or on their own key, as you prefer.
• Outbuildings, casitas and padlocks. Padlocks are hit or miss. Some commercial-grade padlocks have rekeyable cylinders, and some are sold in common residential keyways. Budget padlocks aren't rekeyable at all, and the practical fix is a matched set of new keyed-alike padlocks. We'll tell you which of yours can be re-pinned before you pay for anything.
• Key cutting, key count and a key record. Keep one key cut from code as your master copy and make future duplicates from it, not from a worn copy. If you'd like restricted keys that can't be copied at a kiosk, ask about upgrading the main entry cylinders. That's a different job from a standard rekey, so we'll explain the options separately.

Local factors in City of Industry

Inland summer heat in City of Industry bakes door hardware. Finishes fade, latches swell and stick, and cylinders collect fine dust that makes keys drag. Re-pinning a lock is a good moment to clean it and replace tired springs. During a whole-house rekey we note which locks feel gritty or stiff, because heat-stressed hardware often fails soon after. West-facing doors and garage entries tend to be the worst, and we can quote replacements alongside the rekey.

Situations this covers

• Two siblings inherit their parents' house near Industry Hills and find a kitchen drawer holding over twenty keys, some labeled and most not. Rather than match each key to a lock, they decide to rekey everything. We confirm they can act for the estate, walk the property, re-pin the house, garage and gate, and put the workshop on its own key for whichever sibling keeps it.
• A homeowner installs a Schlage Encode on the front door and considers the house secured. The back door, garage entry and side gate still use the old key that a former contractor copied. We rekey those to match the Encode's backup cylinder, so a single physical key opens everything, and we show her how to prune old app users.
• A remodel crew held a house key for three months, along with the garage keypad code. The work is finished and the family is pleased, but they would like the key count reset. We rekey the exterior doors and the garage entry, help them change the keypad code, and walk the property to be sure nothing else, like a side gate or lockbox, still works for the crew.
• A seller wants one key for the agent's lockbox, so showings, the photographer and the inspector all use the same key. We rekey the front, back, garage entry and side gate before the sign goes up. The seller hands the new keys to the escrow officer at closing, and every earlier copy is already useless.

From your call to the finished job

1. Count the keyholes before we arrive. Walk your property before you call and note every keyed lock, including the knob beneath the deadbolt, security screens and gates. Photos of each help. A short look now saves surprises later, and it tells us whether one visit can cover everything.
2. Gather every key and show you belong at the address. Put every key you own on the table: house keys, garage keys, padlock keys, tiny keys for cabinets and window locks. We try each in each lock to learn what opens what. Some turn out to fit nothing, which is a useful finding.
3. Agree on the key plan before any pins come out. This is the moment to decide about odd locks. A rusted gate latch, a worn knob or a slider with no cylinder may be replaced, left off the plan or handled separately. We explain your options for each and quote them before work begins.
4. Rekey one door at a time and test as we go. We work in an order that keeps you secure: exterior doors first, then the garage, then gates and outbuildings. If your schedule allows only part of the job on one day, the most exposed doors are the ones finished first.
5. Cut, count and test every key. We'll hand you a short list showing which door takes which key. Keep it private, since it shows how your keys work. If you ever add a lock, the list tells you which keyway and key to match.
6. Reset what rekeying doesn't touch. Cut up or recycle the old keys so they can't be mistaken for current ones. Don't keep them just in case. Then store your master copy somewhere safe and away from the house, with the key list kept separately.

Pricing factors

• How many keyways are in the mix. Locks that share a keyway can be pinned to one key at modest cost. A house with Kwikset, Schlage and an unbranded deadbolt needs more: replacement cylinders or locks to bring the outliers into line. We quote the as-is route and the one-key route separately.
• Condition of the oldest and cheapest locks. Sun and sprinkler overspray age exterior hardware faster than interior hardware. Expect the side gate and back door to be the hardest. A bit of cleaning and fresh springs revives many locks, while others have simply reached the end. We'll tell you which is which.
• Specialty, high-security and smart-lock cylinders. Smart locks add a step: removing the unit, re-pinning the backup cylinder, reinstalling it and testing the motor. Retrofit models like August and Level add less than full replacements like Schlage Encode or Kwikset Halo. We tell you what your model needs.

Every job gets a clear quote before any work starts. Call (951) 903-3193 with the details and we'll tell you what to expect for your situation in City of Industry.

What not to do

• Spending a rekey on a failing lock. A knob with a worn latch or a deadbolt chewed up by a past break-in will keep failing no matter how new the key is. Replace the weak hardware and key it to match, instead of nursing it along.
• Keeping the old keys just in case. They open nothing after the rekey, but a drawer of dead keys confuses everyone later and tempts someone to hand one out. Recycle them, and keep only the new, labeled set and one stored master copy.
• Rekeying in pieces over several months. The front door this week, the back door next month, the gate eventually. The gaps stay open, the key set keeps changing, and you pay for several trips. Do the whole property once, using one agreed plan.

Practical tips before you call

• Ask about your mailbox separately. A private mailbox has its own small key and can usually be rekeyed or replaced. A cluster box belongs to the postal service or the HOA, and its locks follow their rules. Don't lump either one into your house key plan.
• Draw a rough floor plan and mark every keyed lock on it before we arrive. Include the ones you've never used, and check both faces of each door, since a keyhole on only one side still counts. That quick sketch becomes the backbone of your key record afterward.
• Check the knob under the deadbolt first. On many front doors the knob has a key slot of its own, and owners forget it because the deadbolt does the real work. If it takes a key, it belongs on the new plan, or the old key still turns it.
• Plan around pets and children. We move between yard and house repeatedly, opening gates and doors. Secure dogs indoors or in a bedroom before we arrive, and let us know about any gate that has to stay latched. Kids shouldn't be left with a spare key on a necklace.

Reaching City of Industry

City of Industry is about 46 miles from our San Bernardino base, roughly 52 minutes in light traffic via I-215 North to I-15 at Devore, I-15 South through Rancho Cucamonga and Ontario. When you call, you get an arrival estimate based on where the technician is and the traffic at that moment.

Rush hour on I-605 can stretch a drive considerably. We'd rather give you a realistic arrival window than an optimistic one, and we'll call you if a closure or a crash changes the plan.

About City of Industry: Metrolink's Industry station on Brea Canyon Road opened in 1993 and serves the Riverside Line between Los Angeles Union Station and downtown Riverside.

Planning a rekey in City of Industry?

Call (951) 903-3193 and tell us how many doors you want on the new key and the brand of the locks if you know it. We'll quote the rekey before any work starts.