House Rekey in City of Industry, Planned Door by Door

How this works in City of Industry

The age of a house shapes its rekey. Homes from the 1920s through the 1940s may still have mortise locks, some of them warded skeleton-key locks that can't be rekeyed in any meaningful way and are better retired in favor of a proper deadbolt. Mid-century ranch houses often have early Schlage knobs that still rekey well, if paint and grime haven't sealed the trim. Tract homes from the 1970s through the 1990s tend to mix brands, Kwikset, Schlage, Weiser and Weslock, so keying the house alike may mean swapping a cylinder or two to a common keyway. Houses built since 2000 usually arrive with builder-grade Kwikset SmartKey or Schlage locks on matching keys, which makes a house rekey quick. Custom homes may have Baldwin or Emtek handlesets whose decorative trim needs careful removal. Telling us when your house was built, and roughly what's on the doors, helps us bring the right pins and the right replacement cylinders to City of Industry.

What we can do on-site

• Garage-to-house door. The door from the garage into the house is the most overlooked lock in a house rekey. Many people leave it unlocked, and anyone with an old garage remote or keypad code can reach it. We rekey its knob and deadbolt to the house key and suggest keeping it locked as an exterior door.
• Garage side door and detached garage. The side door into the garage usually faces a narrow side yard, gets little use and often has the oldest lock on the property. We rekey it to the house key or replace it if sun and rain have chewed it up. If you have a detached garage or workshop, its entry door gets the same treatment.
• Side gates and yard padlocks. Side gates hold back pets and guard the route to your back door. Padlocks can sometimes join the house key if they have rekeyable cylinders; laminated hardware-store padlocks usually get replaced. Keyed gate latches can often be re-pinned. We'll sort through them as part of the house rekey.
• Older-house and mortise locks. Original hardware on a vintage house is worth keeping when it works. We take extra care with painted-over trim, aged set screws and brittle parts, rekey the cylinders that can be rekeyed, and tell you honestly which locks offer little real security, so you can decide whether to upgrade them or simply add a deadbolt.
• Household key plan and spares. Rather than handing a key to every helper, consider a keypad or a lockbox for people who come occasionally, such as a dog walker or house cleaner. Codes can be changed in seconds; keys have to be collected or the house rekeyed. We'll help you decide what belongs on a key and what belongs on a code.

What's different about City of Industry

Inland sun is hard on exterior hardware, and a house rekey in City of Industry is a good chance to see how yours has aged. West-facing doors and side-gate padlocks bake, finishes crack, lubricant dries and cylinders stiffen. We clean and relubricate with a dry graphite or PTFE product instead of oil, which collects dust. Electronic locks have their own heat problem: batteries wear out sooner, so we check them and suggest replacing them before they fail.

Long commutes leave the house empty from early morning, and a rekey can't happen while you're stuck on the freeway. We start at 6:30 a.m. every day and run until 11:30 p.m., so an early or evening appointment fits around the drive home. If you can't be there all day, a spouse or trusted adult can show ID at the start of the visit, walk the doors with us and approve the quote.

Common situations

• Picture a 1930s Spanish-style house in Industry Hills with its original mortise lock on the arched front door. The cylinder on the outside is threaded into the lock body and can be re-pinned, so the door keeps its character. The interior skeleton-key locks don't matter for security, and the back door gets a modern deadbolt keyed to the front cylinder.
• Say a homeowner rents the casita behind the house to a long-term tenant. The main house needs rekeying because a former roommate kept a key, but the tenant's unit shouldn't change without notice. We rekey the main house doors and side gate to one key, leave the casita on its own key, and the owner schedules that unit separately with proper notice.
• For example, an executor handling a late parent's house books a rekey before the cleanout crew starts. She brings ID and the court's letters showing her authority. Several relatives, a caregiver and a neighbor had keys over the years. We rekey every exterior lock, cut keys for the executor and the cleanout company, and note which doors share a key for the eventual buyer.
• Picture a 2006 two-story off Brea Canyon Road with builder-grade Kwikset SmartKey on every door. The previous owners left two keys and a garage keypad still set to their code. With a working key, each SmartKey cylinder resets quickly, so the house rekey covers the front, garage entry, garage side door and back door in one short visit, followed by a keypad code change.

From your call to the finished job

1. Walk your house before you call. Start at the front door and walk the outside of your house, including the garage. Count every keyhole: deadbolts, knobs, handlesets, screen doors, gate padlocks, a shed or casita. Note the brand stamped on each lock face. That count is the heart of an accurate house rekey quote.
2. Gather proof the house is yours. We confirm you own the house or live there before any lock comes apart. Photo ID with the address works, or ID plus a deed, property tax bill, utility bill or closing papers. Renters need the owner's written consent; executors and trustees bring the court letters or trust paperwork.
3. Walk-through and label every door. We look at each lock's brand, keyway and condition as we go. A Kwikset deadbolt next to a Schlage knob on the same door means a keyway decision. A stiff, sun-faded side door lock might need replacing. You see every recommendation on the spot, with a price, before tools come out.
4. Settle the key plan. Decide which doors share a key. Most houses go on one key; some keep a casita, workshop or rented room on its own. If brands don't share a keyway, we'll suggest which cylinders to swap so the plan works. Then we agree on how many keys to cut for each zone.
5. Rekey door by door and test. SmartKey locks reset with a tool when a working key is available; pin tumbler cylinders are re-pinned by hand. Either way, we test every door the way you'll use it: closed, latched and locked. A deadbolt that throws fully on the bench but drags in the frame gets its strike adjusted.
6. Close the routes keys don't cover. The final step is about everything without a keyhole. Garage remotes, keypad codes, alarm codes, smart lock users and lockboxes can all outlast the old keys. We go through them with you so the house rekey actually closes every way in, not just the ones a key operates.

What affects the cost

• How many keyed openings the house has. The quote follows your count, cylinder by cylinder. If you'd like to stage the work, rekey the doors into living space first: front, garage entry and back. Outbuildings and gates can follow later, though doing everything in one visit avoids paying for a second trip.
• Separate key zones. Zones change the key count more than the pinning work. A main house key plus a separate casita key means two sets of keys to cut and track. If an owner needs a key that opens both, ask about it; on some hardware that requires master pins, which takes more planning.
• Missing keys and stuck cylinders. Stuck locks are common on rarely used doors such as garage side doors and back gates. Freeing them up takes time and sometimes reveals a cylinder that's past saving. You'll get a clear explanation and a price before we go further, so the house rekey never turns into an open-ended bill.

Every job gets a clear quote before any work starts. Call (951) 903-3193 with the details and we'll tell you what to expect for your situation in City of Industry.

Practical tips before you call

• Photograph every lock face on your house before you call, front and back. The brand name stamped on the cylinder or the key bow tells us the keyway, and the photos let us bring the right parts, especially for an older house with a mix of locks from different decades.
• Book the house rekey for an evening or early morning when you'll be home. We schedule City of Industry homes from 6:30 a.m. to 11:30 p.m. every day of the week, Fridays and Saturdays included. A weekday evening visit means you don't have to take time off work.
• Think about sliders while you're focused on locks. A standard sliding door latch isn't keyed, so a house rekey won't touch it, but a secondary pin lock or a bar in the track adds real protection. It's an inexpensive fix to handle the same week as the rekey.
• Retire the hidden spare key. Fake rocks, doormats, planters and porch lights are the first places anyone looks. Leave a spare with a trusted neighbor or relative, or install a keypad on one door, so a lost-key evening doesn't require hiding a key outside your house again.

Common errors that cost time and money

• Replacing every lock in the house when the existing hardware is sound. New hardware costs considerably more than rekeying and doesn't keep out old keys any better. Save replacement for locks that are worn, damaged, missing a deadbolt or simply not the quality you want.
• Buying matching locks for one door and expecting the house key to fit. Different brands use different keyways, so a new Schlage lever won't take your Kwikset key. Tell your locksmith before buying, or let us supply hardware keyed to the rest of the house.
• Ignoring a door with no deadbolt. A house rekey changes which key opens the knob, but a spring latch on its own can be slipped or forced far more easily than a deadbolt. If any exterior door has only a knob, add a deadbolt keyed to match.

Reaching City of Industry

City of Industry is about 46 miles from our San Bernardino base, roughly 52 minutes in light traffic via I-215 North to I-15 at Devore, I-15 South through Rancho Cucamonga and Ontario. When you call, you get an arrival estimate based on where the technician is and the traffic at that moment.

Our path into City of Industry depends on where the previous job wrapped up. Sometimes that's a straight run via Valley Boulevard; other times it's surface streets the whole way. Either way, you get a heads-up call when the technician is close.

About City of Industry: The city's land was once part of Rancho La Puente, the Mexican-era rancho held by the Rowland and Workman families.

Planning a rekey in City of Industry?

Call (951) 903-3193 and tell us how many doors you want on the new key and the brand of the locks if you know it. We'll quote the rekey before any work starts.