Rekey Locks after Moving: A City of Industry Move-In Guide

How this works in City of Industry

Keys are only part of a move-in security reset. Garage door openers remember every remote and car button ever paired with them, so clear the memory with the learn button on the motor unit and reprogram only your own. Change the exterior garage keypad code. Keypad deadbolts and smart locks may still hold the previous occupant's user codes, admin account or phone access; reset them and remove anyone you don't recognize. If there's an alarm panel, have the monitoring company transfer the account and change the master code. Video doorbells and cameras can stay linked to the last resident's account until they release them. Gated communities may need to deactivate the old resident's fob or gate code. And mailboxes, often overlooked, can carry a key that changed hands as freely as the door key. A locksmith covers the mechanical side and can help with keypads and smart locks while on site; the rest is a phone call or two on your part. Done together in the first week, the whole reset takes surprisingly little time.

Work included on a typical visit

• Move-in rekey for renters. A renter's rekey is a quiet change: same knobs, same deadbolts, new pin combinations. Plenty of City of Industry landlords approve it readily when the tenant pays and hands back a key. Bring your lease and ID, and if the manager would rather have the work billed to the property, we can quote them directly.
• One key for the whole household. Keyed-alike locks make life easier for a household that just reorganized everything else. Kids carry one key, a sitter carries one key, and nobody fumbles at the door holding groceries. We confirm which locks share a keyway, pin them to the same combination, and tell you plainly if one can't join.
• Security screen doors and sliders. Pushing furniture through a slider often knocks its latch out of line, and a slider that doesn't fully catch is an easy target. While we're rekeying the house, we check that the latch engages, the rollers aren't dragging and the panel can't be lifted off its track. Small adjustments are routine.
• Garage, side gate and outbuilding locks. Detached garages, workshop doors and side gates belong in the move-in plan, especially on older lots with alley access. We rekey cylinders that allow it, replace corroded padlocks, and key gate and shed locks to your house key where the hardware supports it. Fewer keys, fewer gaps.
• Spare keys and key tracking. A new household usually needs more keys than the old one: one per adult, a hidden spare, maybe one for a neighbor. We cut them from fresh blanks and test each in the actual lock rather than handing you untried copies. Tag them with colors, never with your address.

Local factors in City of Industry

Inland heat changes how locks behave after a move. Doors on sun-facing walls expand during summer afternoons, deadbolts begin to bind, and keypad batteries drain faster. When we rekey locks after moving in City of Industry, we also look at strike alignment and weatherstripping, and we suggest checking electronic lock batteries more often between June and September. A door that drags at three in the afternoon usually needs a strike tweak, not a new lock.

Commuters moving to City of Industry often leave before dawn and return after dark, so the new house sits empty for long stretches during the week. Rekey before that routine settles in, not after. We start at 6:30 a.m. every day and stay out until 11:30 p.m., so a rekey can happen before a shift or after the drive home along Valley Boulevard. A keypad deadbolt on the main door also spares you fumbling with a new key on a dark porch.

Common situations

• Say a retiree moves into a 55-and-over condo where the HOA controls the pool gate, clubhouse and mailroom. Those common-area keys belong to the association. What the new owner controls is the unit door, the patio gate and the garage keypad. A typical visit would rekey the two keyed locks, help change the keypad code, and leave common-area keys to the HOA office.
• Picture someone three months into a new place who finds a house key taped under the lid of the water meter box while chasing a sprinkler leak. Nobody knows who left it there or how many others exist. That kind of discovery triggers plenty of late rekeys. It's the same job it would have been on move-in day, and the hidden key turns into a curiosity.
• For example, a nurse moves into a second-floor apartment near Puente Hills Mall, and the manager hands over a key with a unit number scratched into the bow. The office says units get rekeyed most of the time. A sensible plan: ask in writing whether this one was, and if nobody can give a date, get approval to have the deadbolt and knob re-pinned, with one new key left at the office.
• Picture a cross-country move that ends with the truck arriving after dark and the new occupants too tired to think about locks. Nobody has slept in the house yet. A reasonable plan is to throw the deadbolt and chain that first night, then book the rekey for the next morning, before helpers, installers and unpacking crews start cycling through the front door.

Step by step with Julian's Locksmith

1. Tell us about the move. The smoothest bookings start with a few facts: the address, the brand names on your locks if you can read them, and any keypads or smart locks. Renters, let us know whether the landlord has approved the rekey yet. We'll suggest a time that fits both our hours and your move.
2. Show that you belong there. We won't change keys for someone who can't show they live there or own the place; it's basic diligence, and it protects the real occupant. Photo ID plus a lease, a utility bill in your name or purchase documents usually covers it. Moves scatter paperwork, so keep copies on your phone.
3. Walk the property and count cylinders. Every exterior entry gets checked, including ones you might not think of as doors, like a laundry room off the carport or a basement hatch. Together we decide what gets rekeyed, what gets replaced and what stays as it is. Nothing changes until you agree.
4. Re-pin each lock. For Kwikset SmartKey locks, we reset the cylinder with the proper tool instead of re-pinning; for traditional pin tumbler locks, we re-pin. Either way, we run the new key repeatedly and confirm the old one fails before the lock goes back on the door.
5. Reset codes and test every door. Before we pack up, you try every key yourself. It's the only way to know they feel right in your hand, not just ours. We also clear old keypad codes and set new ones with you, so nobody from the previous occupancy can punch their way in.
6. Hand off the keys and the record. You get your new keys, a note of which key fits which door, and the count of copies we cut. Renters get an extra key for the landlord when the lease requires one. File the record with your lease or closing papers; it helps if a key goes missing later.

Pricing factors

• How many cylinders you have. Rekeying fewer locks isn't always cheaper in practice. Leave one door on the old key and you've kept a way in for anyone holding it. We'll price the whole property and show the per-cylinder cost, so you can decide where to draw the line with full information.
• Repairs found during the move-in check. A deadbolt that won't throw fully or a knob with a loose spindle may need parts. We quote repairs as a separate line, so you can see exactly what goes to rekeying and what goes to fixing. Whether to handle both today is entirely your call.
• When and where you book. Booking ahead around your move date gives you the most flexibility. Evening slots up to 11:30 p.m. are open on many days, which suits people working around movers. Weekends run the same hours, so a weekend move fits too.

Every job gets a clear quote before any work starts. Call (951) 903-3193 with the details and we'll tell you what to expect for your situation in City of Industry.

Advice before you book

• Keep keys from your old home in a separate envelope and return them promptly if you rented. Many leases charge for keys that don't come back, and a ring of mixed old and new keys is exactly how people lock themselves out of the new place.
• New-resident mail is full of welcome packets, replacement cards and account paperwork, and a former occupant's mailbox key may still fit. If the box is yours, change the lock in the same visit as the doors. If it's a cluster unit, ask who owns it before anyone touches it.
• Walk the property once looking for hidden keys: under rocks, on top of door frames, inside meter boxes, behind shutters. Previous occupants leave them behind more often than you'd think. Finding even one is a strong reason to rekey, even if you'd decided you didn't need to.
• Clear the garage opener's remote memory with the learn button on the motor head and change the exterior keypad code during your first week. Rekeyed doors don't help much if an old remote still lifts the garage door, especially when the garage opens straight into the house.

What not to do

• Attempting a DIY rekey kit on the wrong brand. Kits are brand-specific, and the pins are tiny and easy to lose or put in the wrong order. A dropped spring or a misplaced pin can leave a cylinder that won't turn at all, sometimes in the locked position, which turns a cheap kit into an emergency call.
• Assuming the landlord rekeyed. Some owners rekey at every turnover, and some only bother when a tenant leaves on bad terms. Unless you have a date or an invoice, you don't actually know, and a manager's best guess is still a guess. Asking costs nothing, while guessing wrong could mean a former tenant's key still opens your door.
• Keeping a spare in the previous occupant's hiding spot. Their favorite place, whether a fake rock or a hook behind the shutter, is known to them and everyone they told. Choose a new location for a spare, or better yet, leave it with a neighbor you trust once you've met them.

Getting to City of Industry

City of Industry is about 46 miles from our San Bernardino base, roughly 52 minutes in light traffic via I-215 North to I-15 at Devore, I-15 South through Rancho Cucamonga and Ontario. When you call, you get an arrival estimate based on where the technician is and the traffic at that moment.

Homes and businesses just off Fullerton Road are routine stops for us. Give the suite or unit number and any gate instructions, and say whether the van can park out front or should pull into a side lot.

About City of Industry: The city-owned Workman and Temple Family Homestead Museum on Don Julian Road includes the Workman House adobe begun in 1842, the 1920s La Casa Nueva and the El Campo Santo cemetery.

Planning a rekey in City of Industry?

Call (951) 903-3193 and tell us how many doors you want on the new key and the brand of the locks if you know it. We'll quote the rekey before any work starts.