House Rekey in Brea, Planned Door by Door

House Rekey in Brea: what to expect

It helps to know what a house rekey leaves untouched. It changes the pins in mechanical cylinders, and that's all. Your garage door opener still responds to every remote ever paired with it until someone clears its memory, usually by holding the Learn button on the motor unit until its light goes out, then re-pairing the remotes you keep. The keypad beside the garage keeps its old code until you change it. Smart locks keep their user codes and app users. Alarm codes, a lockbox left by an agent or contractor, and a spare hidden under a planter all survive too. A mailbox on a cluster box may belong to the Postal Service, in which case the lock change goes through the post office. When we finish a house rekey in Brea, we walk through that list with you, so the only way into your house is the way you intend.

Work included on a typical visit

• Front entry deadbolt and handleset. Front doors get the most use, so their cylinders show the most wear. During a house rekey we pull the deadbolt and entry cylinders, re-pin them, clean out years of grit and check the latch alignment. If a decorative handleset has seen better days, we'll say so and price a matching replacement.
• Garage-to-house door. The door from the garage into the house is the most overlooked lock in a house rekey. Many people leave it unlocked, and anyone with an old garage remote or keypad code can reach it. We rekey its knob and deadbolt to the house key and suggest keeping it locked as an exterior door.
• Garage side door and detached garage. Side garage doors are where we most often find a lock that still takes a previous owner's key. A house rekey isn't finished until that cylinder is re-pinned. We also check the door itself: weathered jambs and loose strikes on these doors are common, and a quick reinforcement costs little while we're there.
• Keypads, smart locks and garage codes. Codes outlive keys. After we re-pin the cylinders, we help you change the garage keypad, clear the garage opener's memory and re-pair your remotes, and remove old user codes from any smart lock. That way a former resident who memorized a code can't simply walk into your house through the garage.
• Household key plan and spares. The last part of a house rekey is deciding who carries keys. We cut a key for each adult and driver in the house, one spare for a secure spot, and keys for anyone who truly needs regular access. Fewer copies means it takes longer before the house needs rekeying again.

Local factors in Brea

A house from before 1980 has usually had its locks replaced one door at a time, so a house rekey in Brea starts by sorting original hardware from later additions. Early Schlage knobs and mortise cylinders often re-pin well once old paint is cleaned off the trim. Warded skeleton-key locks have nothing to rekey and are better backed by a modern deadbolt. Expect at least one door with only a knob, and a screen door or side gate that still opens for a previous owner's key.

Hillside houses often have several levels of entry: a street-level garage, a lower patio door, a deck stair and a side path with a gate. Each is a keyed opening to count during a house rekey in Brea. Santa Ana winds blow grit into cylinders and slam doors on loose strikes, so we clean the locks we rekey and check that latches catch. Consider leaving a spare with someone who can reach the house if you can't.

Townhomes with their own street entrance count as houses for this purpose, but shared walls and common areas change the plan. Your front door, garage entry and any private patio gate are yours to rekey in Brea. The building's shared entry, garage gate and mail room usually belong to the association. Check your CC&Rs before swapping exterior hardware, because some specify handleset styles. A rekey keeps the original hardware in place, which sidesteps most of those rules.

Situations this covers

• A typical find: during a house rekey, the back door turns out to have only a keyed knob, no deadbolt at all. The owner assumed it had both. We rekey the knob with the rest of the house and, with the owner's go-ahead, install a deadbolt keyed to match, set its strike into the framing with long screws, and test it with the door closed.
• A typical call: an adult son moves out of his parents' house and takes his key and a garage remote with him, with no hard feelings, but the parents would rather start fresh. We rekey the front, back and garage entry doors, cut new keys for the household, and help clear the opener's memory so the old remote no longer lifts the door.
• Picture a 2006 two-story off Valencia Avenue with builder-grade Kwikset SmartKey on every door. The previous owners left two keys and a garage keypad still set to their code. With a working key, each SmartKey cylinder resets quickly, so the house rekey covers the front, garage entry, garage side door and back door in one short visit, followed by a keypad code change.
• For example, owners who rented their house out for six years are moving back in. Several sets of tenants, a property manager and maintenance vendors all had keys. We rekey every exterior lock, the side gate padlock and the garage entry door, help them reset the garage opener, and suggest swapping the worn back door deadbolt for a new one keyed to match.

Step by step with Julian's Locksmith

1. Walk your house before you call. A slow lap around the house takes a few minutes and saves surprises later. Check the garage-to-house door, the garage side door, any door from a laundry room or family room, and the side gates. Write down what you find and mention anything that sticks, wobbles or has no key at all.
2. Gather proof the house is yours. We confirm you own the house or live there before any lock comes apart. Photo ID with the address works, or ID plus a deed, property tax bill, utility bill or closing papers. Renters need the owner's written consent; executors and trustees bring the court letters or trust paperwork.
3. Walk-through and label every door. We look at each lock's brand, keyway and condition as we go. A Kwikset deadbolt next to a Schlage knob on the same door means a keyway decision. A stiff, sun-faded side door lock might need replacing. You see every recommendation on the spot, with a price, before tools come out.
4. Settle the key plan. One key for the whole house is the most common choice, and it's usually possible with a cylinder change or two. A second key makes sense where a tenant, a home business or valuable tools are involved. We write the plan on the work order so it's clear what was keyed to what.
5. Rekey door by door and test. We work through the house in a logical order, usually front door, garage entry, back doors, then gates and outbuildings. Keys are cut to code on our machine and checked in every lock they should open. Anything unexpected, such as a seized cylinder, is explained and quoted before we continue.
6. Close the routes keys don't cover. The final step is about everything without a keyhole. Garage remotes, keypad codes, alarm codes, smart lock users and lockboxes can all outlast the old keys. We go through them with you so the house rekey actually closes every way in, not just the ones a key operates.

What affects the cost

• How many keyed openings the house has. House size matters less than the number of cylinders. A large house with three keyed doors can cost less to rekey than a smaller one with screen doors, a casita, a workshop and four gate padlocks. Counting every keyhole before you call is the best way to get a quote that holds.
• Age and condition of the locks. Older locks can take longer. Paint-sealed trim, corroded screws and gritty cylinders slow disassembly, and worn pins sometimes need replacing beyond the usual set. If a lock is too far gone to rekey sensibly, we'll recommend a replacement and price it before touching it.
• Missing keys and stuck cylinders. A lock without a working key can still be rekeyed, but it may need to be picked or decoded first. SmartKey locks without a key lose their quick reset. Seized cylinders, broken key pieces in the keyway and stripped screws add labor. We price those individually when we find them.

Every job gets a clear quote before any work starts. Call (951) 903-3193 with the details and we'll tell you what to expect for your situation in Brea.

Practical tips before you call

• Give the side gate a real lock plan. A padlock on the old key undermines the whole house rekey. Choose between a rekeyable padlock on the house key, a keyed gate latch, or a combination padlock for gardeners and pool service, and change that combination periodically.
• Hand out new keys yourself and write down who received one and when. Keep the list with the house paperwork. A year from now, when someone moves out or a helper stops coming, you'll know immediately whether the house needs another rekey or just a code change.
• Decide what to do with the casita or rented room before the visit. Keying it separately protects a tenant's privacy and your own; keying it to the house is simpler if family uses it. Making the call ahead of time keeps the walk-through short and the quote accurate.
• Before you book, pull every loose key out of drawers, cars and old bags and test them on your doors. You'll often find keys that open something you forgot, like the garage side door. After the house rekey, recycle the old ones so nobody wonders later whether they still work.

Common errors that cost time and money

• Skipping the garage-to-house door because the big garage door is "always closed." Old remotes, a known keypad code or an open side door put someone in the garage, and from there the house door is the only barrier left. It belongs in the rekey.
• Rekeying only the front door. Anyone holding an old key will try the back door, the garage side door or the garage entry next. A house rekey only works when every exterior keyed lock moves to the new key, including the ones that rarely get used.
• Forgetting codes and remotes. A rekey doesn't touch the garage opener, the garage keypad, smart lock codes or the alarm. Former residents and helpers who knew those codes can still get in until you clear the opener's memory and change every code.

Getting to Brea

Brea is about 51 miles from our San Bernardino base, roughly 55 minutes in light traffic via I-215 South briefly to SR-210 West. When you call, you get an arrival estimate based on where the technician is and the traffic at that moment.

Rush hour on Birch Street can stretch a drive considerably. We'd rather give you a realistic arrival window than an optimistic one, and we'll call you if a closure or a crash changes the plan.

About Brea: Downtown Brea was rebuilt on about 50 acres around Brea Boulevard and Birch Street in a redevelopment that opened in 2000.

Planning a rekey in Brea?

Call (951) 903-3193 and tell us how many doors you want on the new key and the brand of the locks if you know it. We'll quote the rekey before any work starts.