2025 Genesis G90 Key Replacement

2025 G90 key specs

The second-generation G90 uses a seven-button smart fob (FCC ID TQ8-FOB-4F53U) with lock, unlock, trunk, panic, remote start and forward and reverse Remote Smart Parking Assist buttons. It carries a Hitag 3 (ID47) chip and a CR2450 battery. The car also supports Genesis Digital Key on compatible phones. Its flush door handles hide a cover over the mechanical keyhole, which is revealed when the handle is pulled out, and a small emergency blade lives inside the fob.

What's specific to the 2025 G90

The 2025 Genesis G90 is the third of 4 model years in the G90 RS4 (2nd generation) (2023–2026), so it shares its key system with the rest of that run, which makes replacement parts easy to source. At 1 year old, a 2025 Genesis G90 is usually still on its original keys and fob batteries. The most common call for a car this new is a second key, since many buyers leave the dealer with only one, or a replacement after a lost fob.

Smart-key cars like the 2025 G90 can be targeted with relay attacks that extend the fob's signal from inside your home, so keep fobs away from exterior walls or in a signal-blocking pouch, and have any missing fob erased from the car.

Key options for the 2025 Genesis G90

• Smart proximity key (push-to-start). Proximity keys bring a security trade-off worth understanding. Because the fob is always listening, thieves with relay equipment can stretch its signal from inside your house to the car in the driveway. Keeping the fob away from exterior walls, or in a signal-blocking pouch, closes that gap, and some fobs offer a sleep mode described in the owner's manual. If a smart key for your 2025 Genesis G90 is lost or stolen, programming a replacement is the moment to delete the missing fob from the car's memory. And be wary of used fobs from online sellers: a lot of them are locked to the vehicle they came from and can't be reprogrammed to yours.
• Phone as key. Digital keys make sharing easy, and that's the part to manage carefully. Most systems let the owner send limited guest keys to family members and revoke them from the app. If a phone is lost or stolen, remove its key from your account right away and use your phone maker's tools to lock or erase the device; that's faster than any visit from us. When you buy a used 2025 Genesis G90 with phone-key capability, ask the seller to remove their account from the vehicle and confirm it's gone in the car's settings, because a previous owner's digital access is controlled through the manufacturer, not the locks. We still handle the physical keys and fobs that go with the car.

How the Genesis immobilizer works on the G90

Genesis became a stand-alone luxury brand in the US with the 2017 model year, and every Genesis sold here starts with a push button and a smart proximity fob. There is no turn-key ignition anywhere in the lineup. The immobilizer and smart key system come from Hyundai Motor Group engineering, so the logic is familiar to anyone who programs late-model Hyundai and Kia vehicles: the car only starts when it reads a registered fob, and registering a fob generally requires a PIN tied to the VIN. The fob hardware has changed in steps. The first G80 and G90 used four-button fobs on CR2032 cells, and the early G70 followed with a similar four-button design. Six- and eight-button fobs with remote start, headlight and Remote Smart Parking Assist buttons arrived on the GV80, the redesigned G80 and the GV70, built around a Hitag 3 (ID47) transponder. The second-generation G90 and the GV60 use larger CR2450 cells. The refreshed GV80 and later G70 builds moved to five- and seven-button fobs with Hitag AES (4A) chips. Newer models also offer Genesis Digital Key, which turns a phone into a key, and the GV60 adds face recognition and a fingerprint reader. Those credentials live in the owner's Genesis account. A locksmith programs the physical fob; you or the dealer set up the phone side.

• Seven-button fobs include remote start and Remote Smart Parking Assist buttons and use a Hitag 3 (ID47) chip.
• The fob takes a CR2450, a larger coin cell than the CR2032 in first-generation G90 fobs.
• The flush door handle hides the mechanical keyhole behind a cover that appears when the handle is pulled out, so know where the blade backup is.

Programming a 2025 G90 key

We confirm coverage for your VIN before the visit. When supported, new fobs register through the OBD-II port using the VIN-based PIN, with all keys present because the session may relearn the key list. All-keys-lost on this flagship can involve extra steps or a dealer-supplied fob, and Digital Key credentials are always managed through the owner's Genesis account rather than by a locksmith.

Flagship with limited fob supply: we confirm coverage by VIN, and some situations need a dealer-supplied fob.

Lost every key to your G90?

1. Gather your documents and the VIN. Call with the year, make, model and VIN if you can read it through the windshield, plus where the car is parked. Those details let us confirm whether your Genesis G90 can be done on-site and bring the right key, so the first trip is the only trip.
2. Get into the vehicle without damage. Entry comes before key-making because we need access to the ignition, the OBD-II port and sometimes the documents in the glove box. We take care with weather stripping, door frames and paint, and we confirm the dash VIN matches your registration before going any further.
3. Originate a new key from the car. With no key to copy, the cuts come from the vehicle itself. We retrieve the key code through manufacturer channels where possible, or decode a door lock with a pick-decoder tool. Then we cut the blade on our code machine and confirm it turns the lock smoothly.
4. Program the key to the immobilizer. All-keys-lost programming often takes longer than adding a key, because the car has no trusted key to authorize the change. We follow the procedure your Genesis G90 requires, then confirm the engine starts and keeps running and the remote or keyless functions respond.
5. Erase missing keys and add a spare. A lost key's metal blade can still open your doors even after its chip is erased. If the keys disappeared along with something showing where you live or park, consider rekeying the car's door lock cylinders too. We'll also recommend leaving with two working keys, not one.

Why a spare key pays for itself

• Some vehicles make it hard to add a key once you're down to one. Certain immobilizer systems let an owner program an extra key on-board only when two working keys are present, so a second key preserves the easy options for later and avoids a full reset.
• A spare stored safely at home rescues you from a locked car with the fob sitting on the seat, a key dropped somewhere along a hiking trail, or a fob that stops responding on a busy morning. Keep it indoors, never in a magnetic box under the bumper.
• Two drivers sharing one key is a daily negotiation. A second key lets a partner, teenager or coworker use the vehicle without handing keys back and forth in parking lots, and it means one person losing their key ring doesn't leave the whole household stuck.

Dealer or mobile locksmith?

Dealers have one clear advantage: direct access to the manufacturer's own systems. Some newer vehicles tie key programming to online authorization that only a dealer can use, and certain all-keys-lost situations on specific platforms still require it. A good locksmith knows where those lines are. Where we can do the job, we use professional programming equipment that talks to the same immobilizer and keyless systems through the OBD-II port, and in many cases the result is identical: a properly registered key that starts the car. Where we can't, we can often still help by opening the vehicle, cutting a mechanical blade from code, or helping you gather what the dealer will ask for so that visit goes smoothly. For your Genesis G90, ask us directly and you'll get a plain answer.

G90 key battery

A fob battery rarely dies all at once. The warning signs build: you have to get closer to the car before the doors respond, the dash shows a key battery or key-not-detected message, or the push-button start only works with the fob held near the button. Inland heat speeds that decline, especially for fobs left in a hot cabin or on the dashboard. Keep a spare CR2450 at home in a cool drawer, sealed in its original package, and buy from a busy store where stock turns over quickly. A cell that sat on a shelf for years may arrive already partly spent.

How the job works

1. Identify the exact key your G90 uses. Every job starts with the VIN, the trim and a look at any key you still have. From those we confirm the keyway, the transponder or smart-key chip, the remote frequency, the FCC ID and the button layout. Two Genesis G90 keys that look identical can carry different electronics, so this step keeps the wrong part from ever reaching the car.
2. Verify ownership before any work. Before cutting or programming, we compare your government photo ID with the vehicle registration or title and check that the VIN on the paperwork matches the VIN on the dash. If the registration is locked inside, we open the car first, confirm the documents, and only then make the key.
3. Get the key code or decode the lock. A key is cut from a code, not a guess. When the factory code can be retrieved through manufacturer channels after ownership is verified, we use it. When it can't, we decode a door lock with a pick-decoder tool that reads the wafer positions without damaging anything, then work out any missing cuts.
4. Cut the blade on-site. Cutting happens right beside your car. For a smart key, that means the emergency blade hidden inside the fob; for a transponder or remote-head key, it's the main blade you'll use every day. We deburr the cuts and check the fit in each lock so nothing binds or sticks later on.
5. Program the chip, remote or smart key. Programming tells the car's computers that the new key belongs to the vehicle. Transponder chips are added to the immobilizer, remote buttons to the body control module, and proximity fobs to the keyless system. If a step requires dealer-only access on your G90, you'll have heard that before we arrived, not halfway through the job.
6. Test everything and clear out old keys. The last step is a short walkthrough. We show you how many keys the car now recognizes, point out the dead-fob start method for your vehicle, and hand you an itemized receipt. If a spare makes sense, it's simplest to add it during this same visit while the equipment is already connected.

What affects the price of a G90 key

• Factory or aftermarket parts. Some owners want an exact factory match; others just want a dependable key that starts the car. Both are reasonable choices. The part you pick changes the quote, so we lay out the options side by side, with the trade-offs in fit, button feel and long-term durability, before you decide.
• All keys lost or adding a key. On some vehicles, losing the last key changes the programming entirely, from a quick add-key procedure to a full immobilizer reset or a module read on the bench. That extra labor shows up in the price, and it's the strongest argument for keeping a spare in the house.
• Programming complexity and security access. Two cars with similar-looking keys can program very differently. Newer platforms often guard key programming behind encrypted access or paid credentials, while older systems allow straightforward OBD-II pairing. We check the exact procedure for your VIN before quoting, so the number reflects the real work involved.
• Travel, timing and extra repairs. Because we come to you, the distance from our San Bernardino base and the time of the call play a part. So does anything we find along the way, such as a worn ignition cylinder or a seized door lock. You hear about each item and get a quote before we start work.

Call (951) 903-3193 with your VIN and the keys you still have, and we'll quote the job before any work starts.

Common Genesis key problems

• Used or refurbished fobs bought online are a gamble. They can arrive locked to another vehicle, with the wrong part number or with a worn case, and a fob that can't be programmed to your car is money wasted.
• Buttons that work only sometimes after a drop or a trip through the washing machine usually point to board damage inside the fob. A fresh coin cell won't fix that; a new programmed fob will.
• Weak fob batteries cause most Genesis key complaints. A key-not-detected message or shrinking remote range usually means the CR2032 or CR2450 cell is fading, and a car parked in inland summer heat drains it faster.

Tips from a mobile locksmith

• If your vehicle has a proximity key, think about where it sleeps at night. A fob hanging by the front door can sit within range of relay equipment used to open and start cars from outside. A drawer deeper inside the house, a signal-blocking pouch, or the fob's own sleep mode reduces that risk considerably.
• Learn your car's dead-fob start method now, in the driveway, rather than in a dark parking lot later. Depending on the make, you hold the fob against the start button or place it in a marked pocket in the console. Also find the hidden keyhole on the driver's door handle and practice using the emergency blade.
• Southern California heat is hard on keys. Fob batteries drain faster, plastic housings turn brittle, and rubber button pads crack when a key spends summer afternoons on a dashboard or in a sunny cup holder. Carry the fob with you or keep it shaded, and replace batteries before summer rather than after they fail.

Proof of ownership

Not every situation fits the simple case, so here's how we handle the common exceptions. For a leased or financed vehicle, a registration that lists you as the registered owner or lessee works with your ID. If you just bought the car, bring the signed title or bill of sale along with your ID. For a company or fleet vehicle, we need written authorization from the business plus the driver's ID. If the car belongs to a family member, the registered owner should be present or provide signed permission and a copy of their ID. Rental vehicles go through the rental company.

Need a 2025 Genesis G90 key?

The quickest route to a working key for a 2025 Genesis G90 starts with a short phone call. Dial (951) 903-3193, share the VIN and where the car is parked in Southern California, and we'll tell you whether it's an on-site job, a dealer job, or a mix of both. No pressure and no surprise charges, just a straight plan.