2024 Genesis G90 Key Replacement

2024 G90 key specs

The second-generation G90 uses a seven-button smart fob (FCC ID TQ8-FOB-4F53U) with lock, unlock, trunk, panic, remote start and forward and reverse Remote Smart Parking Assist buttons. It carries a Hitag 3 (ID47) chip and a CR2450 battery. The car also supports Genesis Digital Key on compatible phones. Its flush door handles hide a cover over the mechanical keyhole, which is revealed when the handle is pulled out, and a small emergency blade lives inside the fob.

What's specific to the 2024 G90

The 2024 Genesis G90 is the second of 4 model years in the G90 RS4 (2nd generation) (2023–2026), so it shares its key system with the rest of that run, which makes replacement parts easy to source. At 2 years old, a 2024 Genesis G90 is usually still on its original keys and fob batteries. The most common call for a car this new is a second key, since many buyers leave the dealer with only one, or a replacement after a lost fob.

Smart-key cars like the 2024 G90 can be targeted with relay attacks that extend the fob's signal from inside your home, so keep fobs away from exterior walls or in a signal-blocking pouch, and have any missing fob erased from the car.

Key options for the 2024 Genesis G90

• Smart proximity key (push-to-start). Proximity keys bring a security trade-off worth understanding. Because the fob is always listening, thieves with relay equipment can stretch its signal from inside your house to the car in the driveway. Keeping the fob away from exterior walls, or in a signal-blocking pouch, closes that gap, and some fobs offer a sleep mode described in the owner's manual. If a smart key for your 2024 Genesis G90 is lost or stolen, programming a replacement is the moment to delete the missing fob from the car's memory. And be wary of used fobs from online sellers: a lot of them are locked to the vehicle they came from and can't be reprogrammed to yours.
• Phone as key. Digital keys make sharing easy, and that's the part to manage carefully. Most systems let the owner send limited guest keys to family members and revoke them from the app. If a phone is lost or stolen, remove its key from your account right away and use your phone maker's tools to lock or erase the device; that's faster than any visit from us. When you buy a used 2024 Genesis G90 with phone-key capability, ask the seller to remove their account from the vehicle and confirm it's gone in the car's settings, because a previous owner's digital access is controlled through the manufacturer, not the locks. We still handle the physical keys and fobs that go with the car.

How the Genesis immobilizer works on the G90

• Seven-button fobs include remote start and Remote Smart Parking Assist buttons and use a Hitag 3 (ID47) chip.
• The fob takes a CR2450, a larger coin cell than the CR2032 in first-generation G90 fobs.
• The flush door handle hides the mechanical keyhole behind a cover that appears when the handle is pulled out, so know where the blade backup is.

Programming a 2024 G90 key

We confirm coverage for your VIN before the visit. When supported, new fobs register through the OBD-II port using the VIN-based PIN, with all keys present because the session may relearn the key list. All-keys-lost on this flagship can involve extra steps or a dealer-supplied fob, and Digital Key credentials are always managed through the owner's Genesis account rather than by a locksmith.

Flagship with limited fob supply: we confirm coverage by VIN, and some situations need a dealer-supplied fob.

Lost every key to your G90?

Losing every key to a Genesis is a bigger job than adding a spare, but it doesn't automatically mean a tow to the dealer. Because Genesis programming depends on the VIN-based PIN rather than on an existing working key, the all-keys-lost procedure on many models looks a lot like adding a key: we open the car, connect through the OBD-II port, enter the PIN and register new fobs, then cut the emergency blade from the key code. Coverage is less certain on the newest builds. Fobs with Hitag AES chips and recently refreshed models are where aftermarket tool support is most likely to lag, and phone keys always run through the Genesis account. We check coverage by VIN before driving out, verify your ID and registration on arrival, and tell you on the phone if your car needs the dealer instead.

1. Gather your documents and the VIN. Find your registration or title and a government photo ID in the same name. Note the VIN, which is printed on the driver's side of the dashboard and usually on your insurance card. If the paperwork is locked in the car, tell us; we'll open the vehicle first and check it there.
2. Get into the vehicle without damage. Entry comes before key-making because we need access to the ignition, the OBD-II port and sometimes the documents in the glove box. We take care with weather stripping, door frames and paint, and we confirm the dash VIN matches your registration before going any further.
3. Originate a new key from the car. With no key to copy, the cuts come from the vehicle itself. We retrieve the key code through manufacturer channels where possible, or decode a door lock with a pick-decoder tool. Then we cut the blade on our code machine and confirm it turns the lock smoothly.
4. Program the key to the immobilizer. All-keys-lost programming often takes longer than adding a key, because the car has no trusted key to authorize the change. We follow the procedure your Genesis G90 requires, then confirm the engine starts and keeps running and the remote or keyless functions respond.
5. Erase missing keys and add a spare. A lost key's metal blade can still open your doors even after its chip is erased. If the keys disappeared along with something showing where you live or park, consider rekeying the car's door lock cylinders too. We'll also recommend leaving with two working keys, not one.

Why a spare key pays for itself

• Electronics fail without warning. A fob dropped on concrete, run through the washing machine or soaked at the pool can quit for good. With a second programmed key, that's an annoyance you fix on your own schedule, not a stranded car that needs attention today.
• When you sell or trade in the vehicle, buyers and dealers expect two keys. A missing key can come up during an appraisal or a private-sale negotiation, so having both on hand keeps the conversation about the car, not about what it will cost the next owner to replace one.
• A spare stored safely at home rescues you from a locked car with the fob sitting on the seat, a key dropped somewhere along a hiking trail, or a fob that stops responding on a busy morning. Keep it indoors, never in a magnetic box under the bumper.

Dealer or mobile locksmith?

Dealers have one clear advantage: direct access to the manufacturer's own systems. Some newer vehicles tie key programming to online authorization that only a dealer can use, and certain all-keys-lost situations on specific platforms still require it. A good locksmith knows where those lines are. Where we can do the job, we use professional programming equipment that talks to the same immobilizer and keyless systems through the OBD-II port, and in many cases the result is identical: a properly registered key that starts the car. Where we can't, we can often still help by opening the vehicle, cutting a mechanical blade from code, or helping you gather what the dealer will ask for so that visit goes smoothly. For your Genesis G90, ask us directly and you'll get a plain answer.

G90 key battery

Most fobs for a 2024 Genesis G90 open along a small slot in the seam; a coin or a plastic pry tool works better than a screwdriver, which chews up the housing. If the fob hides a mechanical blade, slide it out first, since the case often opens from that gap. Note which side of the old cell faces up, swap in a fresh CR2450, and press the halves together until they click all the way around. Handle the new battery by its edges, because skin oil on the faces can hurt contact. In most cases the fob keeps its programming through a battery change, so test lock, unlock and start, and you're done.

How the job works

1. Identify the exact key your G90 uses. We ask a few quick questions on the phone: the year, whether the car starts with a turn key or a button, how many keys you have left, and whether the remote still works the doors. Then we check the VIN against our programming references so the van arrives with the correct blank or fob, not a close guess.
2. Verify ownership before any work. Before cutting or programming, we compare your government photo ID with the vehicle registration or title and check that the VIN on the paperwork matches the VIN on the dash. If the registration is locked inside, we open the car first, confirm the documents, and only then make the key.
3. Get the key code or decode the lock. If you still have a working key, we can read its cuts directly and check them against the factory depths for the Genesis keyway. A worn key gets corrected back to spec during this step, so the new key turns crisply instead of reproducing years of wear in a fresh piece of metal.
4. Cut the blade on-site. Our van carries a code-cutting machine that handles both traditional edge-cut blades and the laser-cut, side-milled profiles common on newer keys. The blade is cut to the code, then test-fitted in a door lock and the ignition or emergency keyhole to confirm smooth operation before any programming begins.
5. Program the chip, remote or smart key. Programming tells the car's computers that the new key belongs to the vehicle. Transponder chips are added to the immobilizer, remote buttons to the body control module, and proximity fobs to the keyless system. If a step requires dealer-only access on your G90, you'll have heard that before we arrived, not halfway through the job.
6. Test everything and clear out old keys. Before we leave, every function gets checked: doors, trunk or liftgate, panic button, remote range, engine start, and the emergency blade in the driver's door. If keys are missing, we delete them from the car's memory where the system allows, so a lost key can no longer start the engine.

What affects the price of a G90 key

• Factory or aftermarket parts. Some owners want an exact factory match; others just want a dependable key that starts the car. Both are reasonable choices. The part you pick changes the quote, so we lay out the options side by side, with the trade-offs in fit, button feel and long-term durability, before you decide.
• All keys lost or adding a key. On some vehicles, losing the last key changes the programming entirely, from a quick add-key procedure to a full immobilizer reset or a module read on the bench. That extra labor shows up in the price, and it's the strongest argument for keeping a spare in the house.
• Programming complexity and security access. Two cars with similar-looking keys can program very differently. Newer platforms often guard key programming behind encrypted access or paid credentials, while older systems allow straightforward OBD-II pairing. We check the exact procedure for your VIN before quoting, so the number reflects the real work involved.
• Travel, timing and extra repairs. Sometimes a key problem is really a lock problem: an ignition that won't turn even with the right key, or a door cylinder that has been jammed for years. Fixing those is separate work. We point them out, explain the options, and quote the whole job up front so the bill holds no surprises.

Call (951) 903-3193 with your VIN and the keys you still have, and we'll quote the job before any work starts.

Common Genesis key problems

• On the GV60 and the Electrified models, a drained 12-volt battery can make the car ignore a perfectly good fob. We test that small battery before anyone spends money on a new key.
• Owners often leave a spare at home. Some Hyundai-group systems relearn the whole key list during registration, so a fob that isn't in the car for the session may stop starting it afterward. Bring every fob you own.
• Ordering a fob by model year alone often goes wrong. Genesis used several fobs per model with different buttons, chips and batteries, so the part number and FCC ID printed on your current fob are what count.
• Phone keys fail when the phone does. A dead phone battery, a signed-out Genesis account or a new handset can leave Digital Key users stuck, so keep a physical fob where you can reach it.

Tips from a mobile locksmith

• When a key's head cracks or its blade bends, replace it before it fails. A transponder chip can slip out of a split head, and a bent blade can break off inside the ignition or door lock, turning a simple key replacement into an extraction and repair job. Small symptoms are the inexpensive time to act.
• Never hide a spare key or fob on the outside of the car. Magnetic boxes in wheel wells and under bumpers are the first places a thief checks, and with a proximity fob, a hidden key can let anyone open the doors and drive away. Keep the spare at home or with someone you trust.
• Be careful with discount fobs from online marketplaces. A listing may match your remote's shape while using a different frequency, chip or FCC ID, and many used smart keys are locked to their original vehicle. If you already bought one, send us the listing or a photo before the visit so nobody pays for a programming attempt that can't work.

Proof of ownership

Making car keys is regulated work in California. Locksmiths are licensed and overseen by the Bureau of Security and Investigative Services under the Locksmith Act, Business and Professions Code section 6980 and following, and Julian's Locksmith holds company license LCO7891. Verification protects you more than anyone: a locksmith who will make a key for whoever asks will also make one for someone who wants your car. We record your name, the vehicle and its VIN on a work order, and we politely decline jobs where ownership can't be established. You can look up our license at search.dca.ca.gov.

Need a 2024 Genesis G90 key?

The quickest route to a working key for a 2024 Genesis G90 starts with a short phone call. Dial (951) 903-3193, share the VIN and where the car is parked in Southern California, and we'll tell you whether it's an on-site job, a dealer job, or a mix of both. No pressure and no surprise charges, just a straight plan.