2020 Ford GT Key Replacement

2020 GT key specs

The second-generation GT starts with a button and uses a smart fob registered to the car's security system. Beyond that, the car is a special case. Production ran to roughly 1,350 cars, keys are not stocked like everyday Ford fobs, and Ford handled sales and service through approved dealers. We don't keep keys for this car, and we would point an owner toward the selling dealer for a new fob.

What's specific to the 2020 GT

The 2020 Ford GT is the fourth of 6 model years in the GT Second generation (2017–2022), so it shares its key system with the rest of that run, which makes replacement parts easy to source.

A 2020 Ford GT is about 6 years old now. Original fob batteries are near the end of their life at this age, so weak range or a "key not detected" message is often a battery before it is a failed fob. Cars this age are often on their second owner, which is when a single remaining key and a request for a spare tend to show up.

Key options for the 2020 Ford GT

• Smart proximity key (push-to-start). Making a new smart key is mostly a programming job. The fob has to match the vehicle's FCC ID, frequency and chip, and then the keyless system must be told to accept it, normally through the OBD-II port. Depending on the platform, that can mean entering a PIN, waiting through a timed security procedure, or on some newer vehicles, using manufacturer online access. When every key is lost, certain models need a module removed and read on the bench. For your Ford GT Second generation, we'll tell you which of those applies, and if a step is dealer-only, you'll hear it before we drive out. The emergency blade hidden inside the fob is cut by code during the same visit.

How the Ford immobilizer works on the GT

Ford's immobilizer is PATS, the Passive Anti-Theft System, sold under the SecuriLock name. A transponder sealed in the key head, or built into the fob on push-button models, answers a coded challenge from a coil around the ignition or from antennas in the cabin, and the engine won't run until the powertrain computer accepts the answer. Across 2000-2026 the chip changed in clear steps. Pickups, big SUVs and the Crown Victoria used a fixed-code Texas 4C chip into the early 2000s, and the Excursion kept it through 2005. The first Escape and early Focus used a Texas 4D60. Between 2000 and 2004 most of the lineup moved to the encrypted Texas 4D63, with 80-bit versions becoming the norm around 2011, while most catalogs list the E-Series van with chip keys only from 2008. NXP Hitag Pro arrived with the 2013 Fusion, reached the F-150 for 2015 and now covers nearly the whole lineup. Remote-head keys appeared in the mid-2000s, Intelligent Access push-button fobs around 2010, and long-range 902 MHz fobs came with remote start. Recent models use 434 MHz fobs, and the Mustang Mach-E and F-150 Lightning added Phone As A Key.

• Ford planned about 1,350 GTs, so aftermarket fobs and programmer coverage are far thinner than for a mainstream Ford.
• We know of no aftermarket fob for this GT, so a replacement has to be a Ford part.

Getting a 2020 GT key from the dealer

Keys for this GT go through Ford. The fob is a smart key that must be registered to the car's security system, and the parts and service process for this low-volume car runs through dealers approved to handle it. What we can do locally is limited to lockout help and, if the emergency blade is available, cutting it to your lock. For a replacement fob, start with the dealer that sold or services the car.

Replacement fobs for this low-volume car come through Ford's approved GT dealers; we can help with lockouts and blade cutting only.

How we help when the key must come from Ford

When every key to a Ford is gone, older models are usually a single visit. We cut a working key from the factory key code or by decoding a door lock, then erase the missing keys from PATS and program new ones, so a lost key that turns up later won't start the vehicle. Ford's procedure expects at least two keys after an erase, so plan on two. Push-button Fords get new fobs plus freshly cut emergency blades through the same port. On push-button Fords from about 2015 on, an active alarm often means an emulator or bypass cable, and on many 2020-and-later models, including the current F-150, Super Duty, Bronco and Explorer, all-keys-lost can also call for an online security step or, on some builds, the dealer. We check your VIN against current tool coverage before quoting, and we ask for ID and proof of ownership first.

1. Get you back into the car. If the car is locked, we open it on site without damage, so you can reach the registration, the VIN plate and anything you need inside.
2. Line up the dealer order. We help you gather what the Ford dealer will ask for: the VIN, current registration or title, and photo ID in the owner's name. That avoids a second trip.
3. Keep the car where it is if possible. Ask the dealer whether the key can be programmed with the car in place or whether it needs to be towed in. Some brands deliver a pre-coded key; others must program it at the vehicle.
4. Plan for a spare. Once you have a working key, order a second one. Losing the only key on a dealer-only system is the slowest and most expensive situation to recover from.

Why the 2020 GT needs a dealer key

On the 2020 GT, the immobilizer and the keyless system trust only keys that Ford's own system has authorized for that VIN. Programming happens through a secure online connection, and the key itself is usually ordered with the car's security data already written to it. Independent locksmith equipment is very capable on most vehicles, but on dealer-only generations like this one the honest answer is that the factory has to be involved. Being upfront about that saves you the cost of a wasted service call.

What to bring to the dealer

Bring the vehicle registration or title in your name, a matching government photo ID, and the VIN (on the lower driver's side of the windshield and on the door-jamb label). If the car is financed or leased, the dealer may also ask for the lender's paperwork, so call ahead and ask exactly what they need. If any key still works, bring it; adding a key is usually faster than replacing every key.

While you wait for the new key

Waiting on a factory key can take anywhere from the same day to a week or more, depending on stock. In the meantime, avoid buying a used key online; on dealer-only systems a used key almost never programs to a different car. If you're locked out of the car or need something from inside it, call us; that part is quick and doesn't depend on the dealer.

What affects the dealer's price for a GT key

Dealer key pricing depends on the key type (a smart key costs more than a basic remote key), whether the car needs to be at the dealership for programming, the dealer's programming or labor charge, and whether a tow is involved because no working key remains. Ask for the total, parts plus programming plus any tow, before you agree, and ask whether ordering two keys at once lowers the per-key cost.

Avoid doing this twice

Once you have a working key for your 2020 GT, order a second one while the car's information is already on file. On dealer-only systems, adding a key while one still works is simpler, faster and cheaper than replacing every key after a loss. Keep the spare somewhere you can reach quickly, not in the car, and note where you stored it.

GT key battery

If a new replacement doesn't bring the fob back, the battery wasn't the problem. Common culprits include a battery holder whose solder joints have cracked from drops, contacts corroded by moisture, worn rubber button pads that no longer reach the circuit, or a board damaged by water. We can test whether the fob is transmitting at all and inspect the board closely. Sometimes a new shell or a resoldered holder solves it; sometimes the fob has to be replaced and programmed. Meanwhile, the car can usually still be started with the fob held at the backup spot described in the owner's manual.

Common Ford key problems

• On high-mileage trucks and SUVs from the 2000s, a key that sticks or won't turn usually points to worn ignition wafers or a key copied from a copy. A key cut fresh to factory code often turns smoothly again, and badly worn cylinders can be rebuilt.
• Ford fobs come in 315 MHz, 434 MHz and long-range 902 MHz versions, and two fobs that look identical may not be interchangeable. We match the FCC ID printed on your old fob, or decode the VIN, before ordering a replacement.
• A flashing theft light with a crank and no start, or an engine that fires and dies after a second, usually means PATS didn't read the key. A cracked head that lost its chip, or a hardware-store copy with no transponder, is the usual cause.
• Two chip keys hanging side by side, or a metal gadget pressed against the key head, can confuse PATS. Ford's manuals warn about this, and a truck that starts once the extra keys come off the ring has a healthy key.
• With only one programmed key, Ford's do-it-yourself spare routine is off the table because it needs two working keys. Adding a second key while the first still works is far simpler than an all-keys-lost visit later.

Tips from a mobile locksmith

• Never hide a spare key or fob on the outside of the car. Magnetic boxes in wheel wells and under bumpers are the first places a thief checks, and with a proximity fob, a hidden key can let anyone open the doors and drive away. Keep the spare at home or with someone you trust.
• If your vehicle has a proximity key, think about where it sleeps at night. A fob hanging by the front door can sit within range of relay equipment used to open and start cars from outside. A drawer deeper inside the house, a signal-blocking pouch, or the fob's own sleep mode reduces that risk considerably.
• Southern California heat is hard on keys. Fob batteries drain faster, plastic housings turn brittle, and rubber button pads crack when a key spends summer afternoons on a dashboard or in a sunny cup holder. Carry the fob with you or keep it shaded, and replace batteries before summer rather than after they fail.
• When a key's head cracks or its blade bends, replace it before it fails. A transponder chip can slip out of a split head, and a bent blade can break off inside the ignition or door lock, turning a simple key replacement into an extraction and repair job. Small symptoms are the inexpensive time to act.
• Be careful with discount fobs from online marketplaces. A listing may match your remote's shape while using a different frequency, chip or FCC ID, and many used smart keys are locked to their original vehicle. If you already bought one, send us the listing or a photo before the visit so nobody pays for a programming attempt that can't work.

Proof of ownership

Not every situation fits the simple case, so here's how we handle the common exceptions. For a leased or financed vehicle, a registration that lists you as the registered owner or lessee works with your ID. If you just bought the car, bring the signed title or bill of sale along with your ID. For a company or fleet vehicle, we need written authorization from the business plus the driver's ID. If the car belongs to a family member, the registered owner should be present or provide signed permission and a copy of their ID. Rental vehicles go through the rental company.

Need a 2020 Ford GT key?

Call Julian's Locksmith at (951) 903-3193 if you're locked out of a 2020 Ford GT or need help preparing a dealer key order. We'll tell you plainly what we can do on site and what has to go through Ford.