Rubidoux Lock Rekey: New Keys Pinned Into Your Existing Cylinders

How this works in Rubidoux

A lock rekey decides which key works; it doesn't automatically make a cylinder tougher. Still, the plug is already out on the bench, which makes it the cheapest moment to add resistance. Standard driver pins are plain little cylinders that set cleanly when a pick lifts them. Spool drivers, shaped like a thread spool, and serrated drivers, ringed with fine grooves, catch at the shear line and feed a picker false feedback. They're made for the common residential and commercial keyways, and they don't change how your key feels. Pulling master pins that no longer serve a purpose is another quiet improvement, since each one adds an extra height at which the plug will turn. Bump keys, which exploit plain pin stacks, also become less reliable against security drivers. There are limits, though. A builder-grade knob with a short latch, a strike held by short screws or a cylinder that pulls out under force needs hardware changes, not pins. In Rubidoux, we often pair a rekey with three-inch strike screws and a reinforced strike plate, and for real pick and drill resistance we point people toward restricted, UL 437-listed cylinders rather than overselling what new pins can do.

What we can do on-site

• Deadbolt, knob and lever rekeying. We remove the cylinder from each deadbolt, knob or lever, re-pin it to a new bitting and reinstall it with the original trim. Front, side, garage-entry and back doors can all share one key when they use the same keyway. Every cylinder is tested on the door, locked and unlocked, before we move on to the next one.
• Kwikset SmartKey resets. Not sure your lock is a SmartKey? Look for a tiny slot beside the keyway on the cylinder face. Kwikset revised the mechanism over the years, and older units are more likely to stall partway through a reset. We check which version you have, confirm every new key reads cleanly in each cylinder, and recommend replacing any SmartKey that feels gritty or loose.
• Interchangeable core swaps. Interchangeable cores are easy to spot once you know the shape: a figure-eight outline on the cylinder face, often with a small core mark. Small format cores fit a common housing shared by several brands; large format cores belong to one manufacturer's system. We identify which you have and pin permanent cores to fit, including replacements for temporary construction cores left behind after a build-out.
• Key decoding and code cutting. We read cut depths with a key gauge or caliper and translate them into a bitting code, then cut new keys by code on a machine rather than tracing a worn original. Code-cut keys run smoother in fresh pins and make every future duplicate predictable, no matter which shop eventually cuts it.
• Rekeying locks with no working key. For a single lock with no key, making a key is sometimes faster than tearing the cylinder down. Impressioning reads the marks that binding pins leave on a blank, and careful filing produces a working key right at the door. Once that key turns, the cylinder can be re-pinned to your house key or left as it is, whichever you prefer.

Local factors in Rubidoux

In a family home, keys spread quickly: grandparents, babysitters, neighbors, the house cleaner, a teenager who lost one at practice. Rekeying resets that list to whoever you choose. We key the front, garage-entry and back doors alike when the keyways match, and we can rekey the backup cylinder on a keypad deadbolt to the same key so the kids have one less thing to keep track of.

Older houses in Rubidoux often carry original Schlage, Weiser or Weslock hardware with decades of wear. These cylinders usually rekey well, but pins and springs may be coated in brass dust or fatigued, and discontinued keyways can need specific blanks. We check chamber wear before re-pinning, replace tired springs and tell you plainly when a vintage cylinder should be retired. Original mortise locks in older doors can often be re-pinned too, preserving period hardware you'd hate to lose.

Summer heat in Rubidoux bakes south- and west-facing doors, thins out wet lubricants and turns dust into a paste inside cylinders. When we rekey, we flush the chambers, discard gummed oil, replace weakened springs and use a dry lubricant that won't migrate in the heat. We also test the deadbolt with the door hot and closed, because expansion often shows up as a key that only sticks in the afternoon.

Common situations

A typical visit: a homeowner on Opal Street has a Kwikset deadbolt and two Schlage knobs that she wants to run on one key. We would pull each plug, count the pins and measure the old key with a gauge. Since Kwikset and Schlage keyways differ, we would swap one brand's cylinder for the other's, then re-pin all three to the same cuts. After testing the key in each lock, she carries one key instead of three.

• Here's a familiar one: a homeowner rekeys a Kwikset deadbolt with a store kit, and the new key won't turn. On the bench, every pin turns out to be the right size but loaded in reverse, counted from the tip instead of the bow. We reorder the stack, check each chamber for nicks from the tweezers, then key the matching knob so both locks run on the same key.
• A small fourplex owner in Rubidoux inherited a master key system from the previous manager, along with an unknown number of master keys. We pull each unit's deadbolt cylinder, remove the old master pins, and set up a new master plus four new change keys from a fresh keying chart. Tenants receive their keys in person, and the owner gets the chart for the property file.
• A typical call: a dental office near Flabob Airport lets a front-desk employee go, and the key never comes back. The suite has a storefront door with a mortise cylinder, a rear exit device with a rim cylinder and three interior office locks. We re-pin all five after the last patient leaves, stamp each new key with an identifier, and hand the office manager a written list of keys issued.

Step by step with Julian's Locksmith

1. Count cylinders and confirm authorization. A quick photo of each lock face and the brand name on your key bow speeds things up. On arrival, we match ID to the property: a deed or tax bill for owners, a lease plus landlord approval for tenants, a management agreement or work order for property managers.
2. Choose the new bitting. We either generate a new bitting code within the manufacturer's depth and adjacent-cut limits or decode a key you want to keep. The code is written down so replacement keys can be cut accurately later, even without an original key in hand.
3. Remove each cylinder. Removal depends on the hardware: thumbturn screws on deadbolts, handle catches on many knobs and levers, set screws on mortise locks, back-plate screws on rim cylinders and a control key for interchangeable cores. Each door's parts stay together so the trim goes back exactly as it came off.
4. Re-pin at the shear line. This is the heart of a lock rekey. Each pin stack gets a new bottom pin matched to the new cut depth, and master pins are added or removed as the chart calls for. We inspect chambers and springs while the plug is out and replace anything worn.
5. Reassemble and test on the door. Bench testing isn't enough, so we also test in place: the deadbolt has to throw fully with the door shut, the latch has to retract smoothly and old keys must fail. Binding at this stage usually points to strike alignment, which we adjust or flag for you.
6. Cut keys and leave a record. Before we leave Rubidoux, every key is tried in every lock it should operate. Commercial keys can be stamped with identifiers, and you receive a record of what was cut and issued, so your key control starts from an accurate count.

How we quote the job

• How many cylinders. Every visit also has a fixed side: driving out, setting up the bench and preparing the key machine. Spreading that across more cylinders lowers the cost of each one, so it pays to include the garage side door, the shed padlock and the side gate now rather than booking a second trip a few months from now.
• Brand and cylinder type. Less common hardware adds time for a reason. We may need a manufacturer-specific cylinder retainer, a different pin kit or a cam we don't usually stock. Decorative handlesets and imported European profile cylinders fall into that group. When we know the brand ahead of time, we bring the right parts and keep the job to one trip.
• Number and type of keys. Standard residential blanks are inexpensive, while restricted or high-security blanks cost more and may need dealer authorization. Stamped commercial keys, larger quantities and keys for several levels of a master system all add to the total. Tell us how many people truly need a key so we cut the right number.

Every job gets a clear quote before any work starts. Call (951) 903-3193 with the details and we'll tell you what to expect for your situation in Rubidoux.

What to do before we arrive

• Rekey from a code, not from your oldest key. Ask your locksmith to decode the key and pin the lock to factory depths. A lock pinned to a worn key will feel fine with that key and stiff with every fresh copy someone cuts for you later.
• Include the door between the garage and the house. People remember the front door and forget that one, even though anyone holding an old key and a garage remote can walk straight in. Reset the opener codes on the same day.
• Planning new hardware soon? Buy it in the same brand and keyway as the rest of the house, then have it keyed before installation or during the rekey visit. Adding one mismatched lock later forces either a second trip or a second key on your ring, and neither is what you were after.
• Use a dry lubricant. Graphite or a dry PTFE spray keeps pins moving freely. Wet oils attract dust and pollen, then thicken in warm weather and gum up the chambers, which is a common reason keys start sticking a year after a rekey.

Common errors that cost time and money

• Pinning to a worn key. Using the key in your pocket feels efficient, but its cuts are already shallower than spec. New copies cut correctly won't line the pins up, and you end up with a lock that only cooperates with one aging key.
• Rekeying only the front door. Old keys still open the garage-entry door, the side door or a keyed patio handle if those cylinders are left out, which defeats the purpose of the rekey. Walk every exterior door before scheduling and list each keyed cylinder.
• Ignoring an old master key system. If a previous owner or manager master keyed the property, a rekey that leaves the master pins in place still lets the old master key work. Ask for the master pins to be removed or the system rebuilt.

Service in Rubidoux

Rubidoux is about 22 miles from our San Bernardino base, roughly 28 minutes in light traffic via Palm Avenue or University Parkway to I-215 South through San Bernardino, Colton and Grand Terrace. When you call, you get an arrival estimate based on where the technician is and the traffic at that moment.

Stuck on the shoulder or in a parking lot along SR-60? Get somewhere safe, turn on your hazards, and give us the nearest exit or business so we can find the car without guessing.

About Rubidoux: Flabob Airport, founded by Roman Warren in 1925, is home to Experimental Aircraft Association Chapter 1, and its name combines the first names of later owners Flavio Madariaga and Bob Bogan.

Planning a rekey in Rubidoux?

Call (951) 903-3193 and tell us how many doors you want on the new key and the brand of the locks if you know it. We'll quote the rekey before any work starts.