Change Locks After Buying a House in Perris? Start Here

What to expect in Perris

Escrow is a timeline, and the day you change locks after buying a house belongs at one particular point on it. After the offer is accepted you have inspections and loan paperwork, but the house is still the seller's, so nothing about the locks is yours to change. At the final walkthrough you should look at the doors, not alter them. The deed records when escrow closes, and possession passes either at that moment or at a time written into the contract. That is when your rights over the locks begin. If the seller is renting back for a few days, wait until they have left. If the house has a tenant, the lease continues and the locks are not yours to change on a whim. Julian's Locksmith asks about these details on the first call, because the right visit for a vacant home in Perris looks different from the right visit for a rent-back, and we would rather schedule it correctly once than redo it.

Work included on a typical visit

• Front door deadbolt and handleset swaps. A handleset that rattles or a deadbolt that needs a shoulder to turn isn't worth rekeying. We swap the set, check that the bolt throws a full inch into the strike, and test the latch with the door closed. Matching the existing bore means no new holes drilled in your door.
• Garage-to-house door and side doors. Burglars like side and garage entry doors because they're out of sight from the street. A new deadbolt, a reinforced strike and 3-inch screws turn a weak door into a hard one. We also check the jamb for split wood or filled holes left by earlier owners.
• Smart locks and keypads: reset, replace, re-register. Keypad deadbolts are popular in newer homes because the whole family can come and go without keys. The trouble is shared codes. We set individual codes for each family member, remove default or seller codes, and leave a written list of who has which code.
• Condos, townhomes and HOA-controlled hardware. Common-area hardware, such as lobby doors, pool gates, garage fobs and mail rooms, belongs to the association. We don't change those unless the board authorizes it. What we do change is your unit's entry, balcony and storage locks, and we leave the building's look unchanged.
• Getting into a house that came with no keys. Bank-owned, estate and auction homes often arrive without keys. After we verify your ownership, we open the door with picks or bypass tools, inspect the lock for damage and build a plan: rekey what's sound, replace what's broken and secure every entry before we leave.

What's different about Perris

Family houses in Perris usually have many people coming and going: kids, grandparents, sitters, friends. That's why it matters to change locks after buying a house, and why a keypad or smart lock can help, with codes for each person that you can cancel. We recommend lever handles for small hands and deadbolts that engage easily. We also talk through key control for teenagers, so a lost key becomes a small problem.

Commuters often close on a house in Perris and move in around a tight work schedule. Early-morning and evening appointments help, and our day starts at 6:30 a.m. every day, running until 11:30 p.m. Book around your drive and your move date, not just a convenient window. If you leave before sunrise, a keypad or smart lock can make mornings easier, and a spare key with someone nearby covers the rest.

New-build neighborhoods in Perris are the clearest case where owners who change locks after buying a house should swap rather than rekey. Builders buy hardware by volume, often Grade 3 knobs and thin deadbolts, and subcontractors, inspectors and warranty crews may keep keys after closing. A swap to Grade 2 deadbolts with reinforced strikes gives you better hardware and retires any keys you don't know about. Ask the builder who retains keys, then book the work for the day you take possession.

Situations this covers

• For example, a couple buying their first house near Perris Transit Center wants a smart lock on the front door. The door sags slightly, so the bolt drags. We'd shim the hinges and square the strike before installing, because a smart lock can't fix a sticking door. Then we'd set up their account, enter individual codes and leave a keyed backup, since batteries eventually run down.
• Consider relocating buyers who need to change locks after buying a house in Perris from out of state. Their agent has the keys, the home has been vacant for weeks and nobody has looked closely at the locks. We'd verify ownership and identity before any work, check every entry once access is arranged, and have the doors keyed to the new owners before the moving truck arrives. Their first night starts with fresh keys.
• A typical call: after replacing the front locks, a buyer notices the sliding patio door can be lifted off its track from outside. We'd inspect the track and rollers, add a secondary lock and an anti-lift block, and make sure the new keyed lock on the slider matches the front door key. The front door was the visible risk. The slider was the quiet one.
• Say a buyer wants to change locks after buying a house in Downtown Perris that already has a tenant living there. The lease transfers with the property, so the locks aren't theirs to change, and changing them on an occupied unit can create legal trouble. We'd explain the limits, suggest a landlord-tenant attorney if they're unsure, and plan the lock work for turnover day, once the tenant has moved out and returned every key.

Step by step with Julian's Locksmith

1. Call with your closing date and what you've been handed. Start the conversation before closing if you can. We can't change anything until the house is yours, but we can plan the visit, pencil in a time and tell you what paperwork to have in hand. Planning ahead avoids a scramble on closing day.
2. Show proof of purchase and possession. A buyer's agent's word isn't enough for us, and we explain why. Locks protect people, so we ask the owner for ID and ownership papers, or in a rent-back, proof that possession has passed. If you can't be on site, call first and we'll explain what we need.
3. Walk every door and score the hardware. On the walk-through, we operate every lock, check the latch alignment, and look at the strike plates, hinges and frame. A lock that turns smoothly with the door closed is a candidate for rekeying. A lock that binds, rattles or sticks is a candidate for replacement.
4. Decide door by door: keep, rekey or replace. Now the choices. For each door we offer the options with prices: rekey the existing lock, replace the cylinder, or install a new set. You decide, and we write the plan down. Nothing is replaced for the sake of it.
5. Install, align and fit-check each lock. Rekeys follow the same discipline: new pins, a test with every key, and an inspection of the cylinder for wear. We cut keys on the spot with the same care, checking each cut against the lock's code instead of copying a copy.
6. Test every key, hand over, and list what's still open. Before we leave, we show you how to use any smart or keypad lock, how to change codes and where the batteries go. We also explain key-control basics: where to store spares, how to track copies and why a restricted key can matter.

Pricing factors

• Grade, brand and finish. Brand matters mostly for parts, repair support and keyways. Schlage and Kwikset sets are widely stocked, which keeps the cost down and repairs easy. Premium brands such as Baldwin cost more but look and feel different. We'll show you the options before you choose.
• Door and frame condition. Old hardware leaves its mark: extra holes, painted-over strikes, rubbed-off edges. We fill, shim and reinforce as needed. Normal prep is part of the quote, and extensive repair is quoted separately so there are no surprises. Telling us about visible damage on the phone helps us bring the right filler, strikes and screws.
• Smart features and keypads. A basic smart deadbolt costs more than a standard one, and a model with Wi-Fi, a camera or a fingerprint reader costs more still. We help you decide whether the extras suit your family, and we install and set up the account so it works the first night.

Every job gets a clear quote before any work starts. Call (951) 903-3193 with the details and we'll tell you what to expect for your situation in Perris.

Practical tips before you call

• Test the door before you blame the lock. Close it slowly and watch the latch meet the strike. If the bolt drags or the door rubs, shim the hinges or call us before installing new hardware, because a fresh lock on a sagging door fails early.
• Factory-reset any smart lock the seller left behind and register it under your own account. Delete every old user, change the Wi-Fi password, and note which family member has which code. A reset cleans the lock's memory, not the app account, so ask the seller to remove theirs.
• Pick one brand for the exterior doors. Schlage and Kwikset use different keyways, so a mixed set can't share a single key. Staying with one maker keeps the household to a single key and makes future repairs simpler for any locksmith.
• Ask your agent to confirm in writing that the lockbox is removed and every key, remote, fob and code has been handed over. Then count what you receive. Anything missing at the end of closing is a reason to change locks sooner, not later.

Mistakes to avoid

• Trying to change locks after buying a house before you have possession. Until escrow closes and the contract says the home is yours, the seller controls access. Changing locks early may violate the contract terms and cause real friction with the seller. Ask your agent, and wait for the keys.
• Replacing the lock but not the strike. A shiny deadbolt screwed into a frame with short screws is still weak. A reinforced strike and 3-inch screws make the difference between a door that survives a kick and one that splits.
• Buying the cheapest set at the home store for every door. Bargain-grade locks fit the budget and fail under pressure. Spend more on the front and garage entry doors, and save on the interior privacy knobs where the stakes are lower.

Service in Perris

Perris is about 32 miles from our San Bernardino base, roughly 37 minutes in light traffic via University Parkway to I-215 South through San Bernardino, Colton and Grand Terrace, along the SR-60 overlap in Riverside and past March Air Reserve Base. When you call, you get an arrival estimate based on where the technician is and the traffic at that moment.

Traffic matters more than mileage. We check conditions on Placentia Avenue and its connecting routes before quoting you a time, and we don't pretend a long drive through heavy congestion is a short one.

About Perris: The 2020 census counted 78,700 Perris residents, and the Census Bureau's 2024 estimate put the population at 83,032.

Here are our real hours: 6:30 a.m. to 11:30 p.m., every day of the week, weekends included. We aren't a 24/7 locksmith and won't pretend to be. If you're locked out while we're closed, your auto club or your property manager's emergency line may get you in sooner, and we're glad to book you for the moment we reopen.

Safes get the same scrutiny. Before drilling or manipulating one, we need reason to believe it's yours: a purchase record, the fact that it sits in your home or business, or estate paperwork if you inherited it. A safe exists to keep people out, so proof of ownership isn't optional.

Locked out in Perris?

Call (951) 903-3193 with the address and what's locked. You'll get an arrival estimate and a quote before anyone heads out, and when we arrive we'll ask for ID that ties you to the property. If a child or pet is shut inside a hot car or building, call 911 first.