Need a New Key but Not a New Lock in Perris?

What to know first in Perris

There are three ways to end up with a new key and a lock that still works, and the right one depends on the lock's condition. Rekeying is the default. It suits sound locks and costs the least. A cylinder swap suits locks whose cylinder is worn, corroded, damaged or the wrong keyway, and it also makes sense if you want a restricted or higher-security key such as Schlage Primus or Medeco while keeping the lock body and trim. Full replacement suits cracked bolts, loose or wobbly bodies, failed latches, broken handles and locks too cheap to be worth servicing. In Perris we walk up to your door, try the lock, check the latch and bolt alignment, and then tell you which route fits. The rekey is always the first option we price. If a cylinder swap is the better fit, we show you the old cylinder and what is wrong with it, so the extra part never feels like a mystery line on the quote.

Work included on a typical visit

• Deadbolts: new key, same bolt. Double-cylinder deadbolts, keyed on both sides, are rekeyed one cylinder at a time and matched to a single key. They count as two cylinders on the quote. Because they need a key to get out, we also talk through safety: where the key lives, and whether a single-cylinder model would suit the door better.
• Door knobs and levers with keyed entry. A garage-entry or side door that still wears its original key lock is a common find in Perris. Rekeying those locks is quick, and it shuts out copies that circulated with the previous owner. We also check that the latch retracts fully, since a sticky latch can feel like a bad key.
• Mortise locks in older homes and storefronts. Original mortise hardware in older Perris homes can be decades old and worth keeping. The cylinders come in standard sizes, so a new one can be fitted if the old one is worn out. We keep the escutcheon, the knob and the key's look, and change only what you need changed.
• Interchangeable cores: a swap in seconds. Interchangeable core locks, the figure-eight cores common on commercial doors and some residential ones, accept a new core using a control key. We swap the core and the key changes immediately, with no disassembly of the lock. It's the fastest key change there is.
• Patio doors, security gates and screen doors. Sliding patio doors, wrought-iron security gates and security screen doors often have their own keyed locks, and those are the keys people forget they've handed out. We change them too, so the new key fits every entry, or you choose which ones should stay separate.

How Perris shapes the job

Older Perris homes often have hardware worth keeping: a heavy brass entry set, a mortise lock original to the door, glass knobs with a deadbolt added later. Replacing those means new bores, filled holes and a different look. Changing the key keeps the character. We rekey or swap the cylinder, keep the trim, and tell you plainly if the lock body is tired enough to retire.

Properties with acreage have gates, barns, sheds and sometimes a guest house, each with a lock someone else once had a key to. Changing keys without replacing locks lets you reset all of them economically: padlocks re-pinned, gate cylinders swapped, house doors rekeyed. We bring a mobile kit so the whole property is handled in one visit. Tell us about the tool shed, the equipment barn and the guest cottage so nothing is skipped.

Family homes in Perris accumulate keys: kids, sitters, neighbors, relatives. A rekey resets the lot. We keep the locks you chose and give you a fresh set, then help you decide who truly needs one. It is a sensible habit to rekey when a teenager's friend group changes, a nanny leaves or a child moves out. A single visit can cover the front door, back door, garage entry and side gate together.

Situations this covers

• A shop owner in Perris lets an employee go, and that employee kept a key to the back door. The storefront has a keyed mortise cylinder and an Adams Rite deadlatch. We rekey both cylinders, cut keys for the current staff and leave the door itself untouched, so the shop opens on schedule the next morning with no hardware to repaint.
• After a kitchen remodel, a family wants to be sure the contractor's crew can't come back in. The locks are a mix of sound deadbolts and a sticky back-door knob. We rekey the deadbolts, replace only the knob's cylinder, and leave the rest alone. They pay for what was actually needed, not for a full set of new locks.
• A landlord with a rental off Ethanac Road gets the unit back from a tenant who left on poor terms and kept one key. The Schlage deadbolts are in good shape, so we rekey both and keep the hardware. The landlord leaves with a short record for the next move-in, and the old key no longer fits.
• When a home health aide's contract ends, a family wants the parent's locks changed without fuss. The front door has a newer keypad lock and an older deadbolt. We rekey the deadbolt and the keypad's backup cylinder, update the codes with the family, and leave the parent with one easy-to-grip key and a short note of who holds which code.

From your call to the finished job

1. Describe the lock and why the key needs to change. Count how many keyed locks you want changed and whether you still have a working key for each. A working key makes the job simpler, but it isn't required. Tell us about any smart locks, gates or padlocks so we plan time for them.
2. Show that you're allowed to change it. California's Locksmith Act, administered by the Bureau of Security and Investigative Services, is why licensed locksmiths ask these questions. Our license is LCO7891, and you can look it up at search.dca.ca.gov. The check takes a minute and protects you as much as us.
3. Inspect the lock and choose rekey, cylinder swap or replace. We test the lock before touching it: key action, bolt throw, latch retraction, strike alignment. A sound lock gets a rekey. A worn or corroded cylinder gets a swap. A cracked or failing lock gets a replacement quote. You see the options and choose.
4. Remove the cylinder and re-pin it. We unscrew or release the cylinder, use a plug follower to push the plug out without losing the springs, and swap the key pins for ones that fit the new key. Each cylinder is measured twice. Then it goes back into the lock and the hardware is refitted.
5. Test the new key and the working door. Testing includes the lock's feel. A stiff turn, a gritty plug or a bolt that stops short means something else is wrong, and we fix it or tell you. Smart locks get their backup key tested as well as their keypad.
6. Hand over keys and check what's left. You receive the new keys, usually several, cut on site. We then walk through what a key change doesn't touch: keypad codes, app guests, garage remotes and spare keys held by relatives. Taking a few minutes for that review closes the gaps a new key can't.

What affects the cost

• How many keyed cylinders you're changing. The count of keyholes drives time on site more than anything. A single front-door deadbolt is a quick job. A house with a front door, back door, garage entry, side gate and shed is several jobs in one visit. Tell us the total when you call and we quote accordingly.
• Brand, keyway and security level. Pin counts matter too. Five-pin cylinders are the norm; six-pin cylinders and sidebar designs take more care and sometimes special blanks. We identify the cylinder type from a photo when we can, so the quote matches what we find at the door.
• How many new keys and what type. Think about who actually needs a key. A spouse, a teenager, a neighbor with a spare and a pet sitter can easily add up to six. Fewer, well-tracked keys cost less and keep access under better control than a bowl of loose ones by the door.

Every job gets a clear quote before any work starts. Call (951) 903-3193 with the details and we'll tell you what to expect for your situation in Perris.

What not to do

• Assuming a new key cancels keypad codes, app guests or remotes. The key and the electronics are separate systems. Changing one leaves the other open. After a rekey, review every PIN, app invite and garage remote, and remove anyone who shouldn't have access.
• Leaving old keys mixed in with new ones. After a rekey the old keys no longer work, but they look identical. A family member who grabs the wrong one gets locked out. Remove the dead keys from every ring and mark the new ones with a colored cap.
• Hiring whoever quotes the lowest number on the phone. Teaser quotes tend to grow at the door once the technician says your lock can't be rekeyed. Ask for the company name, the license number and the all-in price. Check the license at search.dca.ca.gov first.

What to do before we arrive

• Keep a spare with someone trusted. Once the new keys exist, give one to a neighbor or relative and keep another in a lockbox you chose yourself. The best time to arrange backup is the day the new keys exist, not the night you're locked out.
• Photograph the lock before you call. Get the keyhole side, the edge of the door where the latch sits and any name stamped on the cylinder face. Those three photos let us recognize the lock, tell you whether it can be rekeyed and quote the visit before we arrive.
• Time the change with a trigger. After a move, a breakup, a lost ring, a contractor's last day or a tenant's departure, rekey within days, not months. The risk is greatest while old keys are fresh and the people holding them still remember which door they fit.
• Remember the electronics. A new key does nothing about keypad codes, app guests, garage remotes or a smart hub that still has an ex's phone on it. Make a list of every way into the house that isn't a key and change those at the same time.

Getting to Perris

Perris is about 32 miles from our San Bernardino base, roughly 37 minutes in light traffic via University Parkway to I-215 South through San Bernardino, Colton and Grand Terrace, along the SR-60 overlap in Riverside and past March Air Reserve Base. When you call, you get an arrival estimate based on where the technician is and the traffic at that moment.

Most trips into Perris use Ramona Expressway for at least part of the drive, and the technician keeps an eye on live traffic along the way so the arrival estimate you heard on the phone stays honest.

About Perris: Perris Valley Airport, a privately owned field about a mile southeast of downtown, is home to Skydive Perris and has given the area its reputation as a skydiving capital.

Planning a rekey in Perris?

Call (951) 903-3193 and tell us how many doors you want on the new key and the brand of the locks if you know it. We'll quote the rekey before any work starts.