Rekeying Your House in Norco: What a Full Rekey Covers

What to know first in Norco

It helps to know what a house rekey leaves untouched. It changes the pins in mechanical cylinders, and that's all. Your garage door opener still responds to every remote ever paired with it until someone clears its memory, usually by holding the Learn button on the motor unit until its light goes out, then re-pairing the remotes you keep. The keypad beside the garage keeps its old code until you change it. Smart locks keep their user codes and app users. Alarm codes, a lockbox left by an agent or contractor, and a spare hidden under a planter all survive too. A mailbox on a cluster box may belong to the Postal Service, in which case the lock change goes through the post office. When we finish a house rekey in Norco, we walk through that list with you, so the only way into your house is the way you intend.

Work included on a typical visit

• Front entry deadbolt and handleset. Most visitors only see the front door, and most keys out in the world were made for it. That makes it the first lock we rekey and the one we test hardest: inside and out, door open and shut, every new key. We also check that the strike plate screws bite into framing, not just the door jamb.
• Garage-to-house door. Garages hold bikes, tools and cars, and the door inside connects all of that to your kitchen. We bring its lock onto the new house key, check that the latch catches every time the closer pulls the door shut, and help you change the garage keypad code before we leave.
• Garage side door and detached garage. The side door into the garage usually faces a narrow side yard, gets little use and often has the oldest lock on the property. We rekey it to the house key or replace it if sun and rain have chewed it up. If you have a detached garage or workshop, its entry door gets the same treatment.
• Back, patio and French doors. Back doors usually have a knob and deadbolt like the front, and both get rekeyed. Sliding patio doors typically have a latch with no outside key; if yours has a keyed exterior cylinder, we'll check whether it can be re-pinned. French doors carry a handleset or deadbolt on the active door and flush bolts on the other.
• Security screen and wrought-iron doors. Wrought-iron and steel security screen doors often have their own keyed lock, frequently on a separate key from the house. Many use standard Kwikset or Schlage keyway cylinders that can be re-pinned to match your house key; some use proprietary cylinders that need a manufacturer replacement. We check yours and quote accordingly.

Local factors in Norco

A house from before 1980 has usually had its locks replaced one door at a time, so a house rekey in Norco starts by sorting original hardware from later additions. Early Schlage knobs and mortise cylinders often re-pin well once old paint is cleaned off the trim. Warded skeleton-key locks have nothing to rekey and are better backed by a modern deadbolt. Expect at least one door with only a knob, and a screen door or side gate that still opens for a previous owner's key.

Inland sun is hard on exterior hardware, and a house rekey in Norco is a good chance to see how yours has aged. West-facing doors and side-gate padlocks bake, finishes crack, lubricant dries and cylinders stiffen. We clean and relubricate with a dry graphite or PTFE product instead of oil, which collects dust. Electronic locks have their own heat problem: batteries wear out sooner, so we check them and suggest replacing them before they fail.

On a large lot the keyed openings run well past the house: a barn, a workshop, a well house, an equipment shed and padlocks at the road. A house rekey in Norco works best as a two-zone plan, with the home on one key and the outbuildings on another, so a ranch hand or contractor can reach tools without reaching your kitchen. Long driveways mean we ask you to confirm gate codes and access before the visit.

Example situations

• Say a family discovers that the fake rock by the porch, the one with the spare inside, is familiar to half the street, a few former babysitters and at least one contractor. The house rekey retires that key along with every other old copy. This time the spare goes to a trusted relative instead of a rock, and the family adds a keypad on the garage entry.
• Picture a 1930s Spanish-style house in Ridge Ranch with its original mortise lock on the arched front door. The cylinder on the outside is threaded into the lock body and can be re-pinned, so the door keeps its character. The interior skeleton-key locks don't matter for security, and the back door gets a modern deadbolt keyed to the front cylinder.
• Imagine a house near George Ingalls Equestrian Event Center at Ingalls Park with wrought-iron security screen doors at the front and back, each on its own key, plus two keys for the doors behind them. Four keys for two entrances is a lot to juggle. During the house rekey we re-pin the screen door cylinders to the Kwikset keyway the house already uses, and everything runs on one key.
• For example, a 1960s ranch house where the owner's key ring has five keys: front, back, garage side door, screen door and a mystery one. Over the years three brands ended up on the doors. During the house rekey we re-pin the Schlage locks to a new combination, replace the odd Weslock knob and the screen door cylinder with Schlage-keyway parts, and the ring drops to one key.

Step by step with Julian's Locksmith

1. Walk your house before you call. Pull out every key you own and try each one in each lock during your walk. You'll learn which doors share a key already, which locks have no working key, and whether a mystery key opens something you forgot. Share that with us when you call (951) 903-3193.
2. Gather proof the house is yours. Verification is quick when the papers are ready. Keep your ID and one document tying you to the address near the front door. If the house is newly purchased and your license still shows an old address, escrow or closing documents with your name on them do the job.
3. Walk-through and label every door. The walk-through doubles as a quick security check. We note doors without deadbolts, strikes held by short screws, sliders without a secondary lock and gates that don't latch. None of it is required for the house rekey, but it's good to know while someone experienced is standing at your doors.
4. Settle the key plan. Think beyond this week. If a family member may move into the casita, or you plan to rent a room later, keying it separately now saves a future rekey. We'll explain the trade-offs and cut a key count that fits the people actually living in the house.
5. Rekey door by door and test. We pull one cylinder at a time, re-pin it to the new combination and put it straight back, so the house is never left with an open door. Each lock is tested with the new key from inside and outside, with the door shut, and the old key is tried so you can watch it fail.
6. Close the routes keys don't cover. The final step is about everything without a keyhole. Garage remotes, keypad codes, alarm codes, smart lock users and lockboxes can all outlast the old keys. We go through them with you so the house rekey actually closes every way in, not just the ones a key operates.

What affects the cost

• Hardware mix built up over the years. Houses accumulate locks as owners replace one door at a time. If your doors carry three brands, keying them alike may mean swapping a cylinder or a whole lock to a common keyway. Those swaps are quoted separately from the rekey, so you can decide which mismatches are worth fixing.
• Age and condition of the locks. Sun and dust are hard on exterior locks. A cylinder that's been baking on a west-facing side door for twenty years may need cleaning, new springs or replacement. Locks on newer houses usually re-pin quickly, while vintage hardware deserves more care and sometimes more time.
• Extras around the property. Gates and outbuildings vary widely. Some padlocks have removable cores that re-pin easily; some gate latches use standard cylinders; others are better swapped for a weather-resistant lock. We'll give you a line-by-line price for every extra, so the decision stays with you.

Every job gets a clear quote before any work starts. Call (951) 903-3193 with the details and we'll tell you what to expect for your situation in Norco.

Common errors that cost time and money

• Rekeying only the front door. Anyone holding an old key will try the back door, the garage side door or the garage entry next. A house rekey only works when every exterior keyed lock moves to the new key, including the ones that rarely get used.
• Forgetting codes and remotes. A rekey doesn't touch the garage opener, the garage keypad, smart lock codes or the alarm. Former residents and helpers who knew those codes can still get in until you clear the opener's memory and change every code.
• Replacing every lock in the house when the existing hardware is sound. New hardware costs considerably more than rekeying and doesn't keep out old keys any better. Save replacement for locks that are worn, damaged, missing a deadbolt or simply not the quality you want.

What to do before we arrive

• Think about sliders while you're focused on locks. A standard sliding door latch isn't keyed, so a house rekey won't touch it, but a secondary pin lock or a bar in the track adds real protection. It's an inexpensive fix to handle the same week as the rekey.
• Book the house rekey for an evening or early morning when you'll be home. We schedule Norco homes from 6:30 a.m. to 11:30 p.m. every day of the week, Fridays and Saturdays included. A weekday evening visit means you don't have to take time off work.
• Retire the hidden spare key. Fake rocks, doormats, planters and porch lights are the first places anyone looks. Leave a spare with a trusted neighbor or relative, or install a keypad on one door, so a lost-key evening doesn't require hiding a key outside your house again.
• Decide what to do with the casita or rented room before the visit. Keying it separately protects a tenant's privacy and your own; keying it to the house is simpler if family uses it. Making the call ahead of time keeps the walk-through short and the quote accurate.

Getting to Norco

Norco is about 29 miles from our San Bernardino base, roughly 33 minutes in light traffic via University Parkway to I-215 South. When you call, you get an arrival estimate based on where the technician is and the traffic at that moment.

Our path into Norco depends on where the previous job wrapped up. Sometimes that's a straight run via Hidden Valley Parkway; other times it's surface streets the whole way. Either way, you get a heads-up call when the technician is close.

About Norco: The Naval Surface Warfare Center, Corona Division, is the city's largest employer and operates from Fourth Street on part of the old Norconian property.

Planning a rekey in Norco?

Call (951) 903-3193 and tell us how many doors you want on the new key and the brand of the locks if you know it. We'll quote the rekey before any work starts.