Commercial Rekey Projects in March Air Reserve Base, Planned Door by Door

Commercial Rekey in March Air Reserve Base: what to expect

How a building is cored decides how a commercial rekey feels. With conventional fixed cylinders, every cylinder has to come off the door, be disassembled, re-pinned and reinstalled. With interchangeable cores, the hardware stays mounted and only a figure-eight-shaped core comes out, released by a control key. Small format cores, the A2 and A4 pinning systems used by Best, Falcon, Arrow and others, and large format cores from Schlage, Sargent, Corbin Russwin, Yale and Medeco both follow this idea. For a rekey, that means new cores can be pinned ahead of time and swapped at each door in moments, which makes IC buildings well suited to frequent tenant turnover. The trade-off is the control key: anyone holding it can pull any core in the system, so it needs tighter custody than any master key. If your property has fixed cylinders and you rekey often, ask whether converting the high-turnover doors to IC housings is worth it. Julian's Locksmith can explain both approaches and quote each so you can compare them on paper before deciding.

Work included on a typical visit

• Rim cylinders on exit devices and night latches. Cylinder-dogged exit devices let staff hold the latch retracted during business hours with a key instead of a hex wrench. Those dogging cylinders belong in the keying plan too. We rekey them along with the trim cylinders so the right people can dog and undog the bar, and nobody outside that group can.
• Storefront and Adams Rite cylinders. Storefronts are the doors with the most keys handed out, since openers, closers and managers all need one. During a commercial rekey we pull each narrow-stile cylinder, re-pin it, and reset the cam position so the bolt throws cleanly. We'll also mention it if the hook bolt or keeper looks worn from years of traffic.
• Construction keying conversion. Contractors, subs and inspectors have all handled a project's construction keys. Converting to permanent keying at turnover makes sure none of those keys work once the building is occupied. We can coordinate timing with the general contractor or the owner's representative, so the conversion happens after the last punch-list visit.
• Tenant suite turnover rekeys. The goal of a suite rekey is to cut off the outgoing tenant without disturbing anyone else. We check which shared doors the old tenant could open, such as restroom corridors, trash enclosures or a back hallway, and decide with you whether those need their own rekey or a separate common-area key.
• Office furniture, cabinet and mailbox locks. Desk pedestals, lateral files and storage cabinets often use cam locks or removable-core furniture locks. In offices that store records or petty cash, those cores deserve the same attention as the doors. We can rekey or replace them during the commercial rekey and key them alike, individually, or under a master.

What's different about March Air Reserve Base

Newer business parks around March Air Reserve Base are often delivered on construction keying or temporary cores, and tenant improvements keep adding trades who have held keys. A commercial rekey at turnover converts the property to permanent keying so no builder, subcontractor or inspector key still works. If the hardware schedule includes a master key system, we pin to that plan and leave a keying chart the facilities team can maintain.

Plenty of building managers and owners drive in from elsewhere in Riverside County, so timing a commercial rekey around when a key holder can be on site matters. We start at 6:30 a.m. every day, which lets us finish a suite before tenants arrive, and we can work into the evening for buildings that clear out late. Tell us when your contact will be there, and we'll plan the visit around that window.

Distribution centers and warehouses around March Air Reserve Base lock far more than personnel doors: roll-up doors, dock offices, battery-charging rooms, fenced yards and fuel cages. Shift work means someone is always on site, so a commercial rekey has to be phased so every shift can still get through its doors. We inventory padlocks and gate cylinders along with the doors, because a perfectly rekeyed building with an old yard padlock still has a hole in it.

Example situations

• For example, a general contractor finishing a tenant improvement in a newer business park calls to schedule the keying turnover. The cylinders shipped with construction cores, and a dozen trades have held keys. After the final inspection, we'd swap in permanent cores pinned to the owner's keying schedule, cut the owner's keys, and leave the contractor's crew holding keys that open nothing.
• A typical older-building job: a single-story office from the 1970s with original mortise locks and keys stamped with a number nobody can trace. The new owner wants fresh keys and real records. During the commercial rekey we'd decode a cylinder or two, clean the gummed-up plugs, replace any seized cylinders outright, and document the new system so the next owner doesn't start from zero.
• A typical call from a logistics site: the facilities supervisor who carried the master ring has left the company, and nobody is sure every key came back. The building has dozens of personnel doors, several roll-up doors and a perimeter gate. We'd inventory first, then rekey in two evening phases so the day shift never shows up to a door its keys can't open.
• For example, a hotel's chief engineer needs back-of-house doors rekeyed after a staffing change in maintenance: the boiler room, linen storage, roof access and the engineering shop. Guest rooms run on electronic card locks and aren't part of the job. We'd rekey the mechanical cylinders to a new engineering key and leave the housekeeping and front-office keys exactly as they are.

Step by step with Julian's Locksmith

1. Scope call. Call (951) 903-3193 and describe the property: building type, rough door count, whether it's master keyed, and why you're rekeying. Mention any padlocks, roll-up doors or cabinets you want included. Those details tell us whether to schedule a site walk first or quote from your description.
2. Authorization and site walk. Before rekeying a commercial property we confirm your authority: ID plus a deed, management agreement, lease with lock rights, or a signed authorization from the owner. Then we walk the property with you or a maintenance lead and log every keyed opening, including the ones people tend to forget.
3. Keying plan and quote. The quote breaks out cylinder rekeys, cores, padlocks, keys and any replacement hardware, so you can trim or add items. If the property needs restricted blanks or a keying chart drawn up from scratch, that shows as its own line. Nothing gets added on rekey day without your sign-off.
4. Scheduling around occupants. Multi-building sites are split into phases that make sense for the people working there. A distribution center might go dock side first, then offices. A shopping center might handle vacant units first, then occupied ones on early mornings. The schedule is agreed before the van is loaded.
5. Rekeying and testing each opening. Testing goes beyond turning the key. We check that latches retract fully, deadbolts throw completely, exit device trim responds, and storefront hook bolts engage their keepers. A rekey that works on the bench but binds once the door is pressed closed isn't finished.
6. Keys, records and handoff. Before we leave, you can walk the property with your new keys if you want to. Afterward, keep the keying record somewhere secure and update it whenever keys are issued or returned. That record is what makes the next commercial rekey quick and accurate instead of starting over.

How we quote the job

• Cylinder count and hardware mix. Counting before you call makes the first quote much closer. Walk the building once and tally exterior doors, interior locking doors, panic bars with keyed trim, storefront locks, padlocks and cabinets. Call with that number. We'll confirm it on site and quote any difference before doing extra work.
• Master keying and keying charts. Each added level raises the price: a grand master over several buildings, masters per building, sub-masters per tenant, change keys per door. More levels mean more calculation and more pins per chamber. We'll suggest the fewest levels that still give each group the access it actually needs.
• Cylinder condition and extra parts. Missing keys raise the cost of the first cylinder or two. With a working key, we turn the plug and pull it quickly. Without one, we may need to pick or decode the lock first. After that, the remaining cylinders on the same key usually go faster.

Every job gets a clear quote before any work starts. Call (951) 903-3193 with the details and we'll tell you what to expect for your situation in March Air Reserve Base.

Common errors that cost time and money

• Assuming a lost key probably isn't a problem. A key from a commercial building can be more dangerous than a house key: it may be a master, it may open several doors, and the finder may be a former employee who knows exactly where it goes. When in doubt, rekey what it opened.
• Adding a key-locking deadbolt to the inside of an exit door to tighten security during the rekey. Building and fire codes generally require exits to open from inside without a key or special knowledge, with only narrow exceptions that come with signage and conditions. Egress function is a code question, not a keying choice.
• Swapping a commercial lever for a cheaper residential knob because it takes the same key. Commercial doors often need Grade 1 hardware, accessible lever trim and, on rated openings, labeled hardware. A rekey preserves all of that; mixing in residential parts can break compliance and wear out fast under commercial traffic.

Practical tips before you call

• Rekey when you change vendors, not months later. When janitorial, security patrol or HVAC contracts end, the outgoing crew often still holds keys. Schedule the rekey for the contract's last day, and issue the new vendor's keys on their first visit.
• When a building is sold, ask the seller for every key, the keying chart and any control keys at closing, then rekey anyway. The chart speeds the work and lets you keep a well-designed hierarchy, but no seller can account for every copy made over the years.
• If your property uses interchangeable cores, keep a few spare cores pinned to the current keying and store them with the control key. When a tenant leaves or a key disappears in March Air Reserve Base, a pre-pinned core turns an urgent rekey into a short swap at the door.
• Keep the number of masters small. Every master in circulation multiplies the cost of losing one, since a lost master usually means rekeying every cylinder it opens. Give supervisors sub-masters for their own areas and keep the top-level master in a locked cabinet with a sign-out log.

Reaching March Air Reserve Base

March Air Reserve Base is about 25 miles from our San Bernardino base, roughly 29 minutes in light traffic via University Parkway to I-215 South through San Bernardino, Colton and Grand Terrace, along the shared 60/215 stretch through Riverside past Box Springs. When you call, you get an arrival estimate based on where the technician is and the traffic at that moment.

We plan the drive the way a delivery route gets planned: freeway first, Meridian Parkway where it makes sense, then the side streets you describe. A landmark or the color of your building helps the technician spot you.

About March Air Reserve Base: The March Joint Powers Authority, made up of Riverside County and the cities of Riverside, Moreno Valley and Perris, oversees civilian reuse of surplus base land.

Planning a rekey in March Air Reserve Base?

Call (951) 903-3193 and tell us how many doors you want on the new key and the brand of the locks if you know it. We'll quote the rekey before any work starts.