Rekey Locks after Buying a House in Lakewood, Before You Unpack

What to expect in Lakewood

A thorough rekey after a home purchase starts with a walk-through. We count every keyed cylinder: front deadbolt and knob or handleset, garage entry door, back and side doors, keyed patio handles, gates, sheds and the mailbox. Then we look at brands and keyways. Many resale homes in Lakewood have a mix, say Kwikset on the front and Schlage on the garage door, and those two use different keyways (KW1 and SC1), so they can't share one key as they stand. We can swap the odd cylinder or replace that lock so one key runs the whole house. Kwikset SmartKey locks are rekeyable too; we set them to your new key so the old one no longer turns them. High-security cylinders such as Medeco or Mul-T-Lock may need restricted blanks or authorized service, and we'll tell you if yours fall into that group. Last, we flag hardware that isn't worth rekeying: worn latches, wobbly deadbolts, a bargain lock on the door from the garage. You decide what gets rekeyed and what gets replaced.

Work included on a typical visit

• Keying the whole house alike. Many buyers inherit a ring with four or five different keys. During the rekey we can set every lock to one combination, so a single key opens the front deadbolt, garage door, back door and gate. Where locks use different keyways, we'll explain the options for getting everything onto one key.
• Garage entry and side door locks. The door from the garage into the house is the one buyers forget and burglars appreciate, since an old opener remote can lift the big door and expose it. We rekey that knob or deadbolt with the rest, and we'll tell you if it lacks a deadbolt and would benefit from adding one.
• Keypad and smart lock resets. Codes travel even further than keys. We wipe every stored code from keypad deadbolts, remove the previous owner's app pairing through a factory reset, and help you set new master and user codes. Then we rekey the override cylinder, which most people forget a smart lock even has.
• Key control after the move. Rekeying resets the clock; good key habits keep it reset. We'll cut exactly the number of keys you need, talk through where a spare should live, and set up a simple plan for housekeepers or contractors, such as a keypad code you can delete when the job ends instead of another loose key.
• When the seller's keys don't fit. Damaged and high-security cylinders are the exception. A lock that was drilled, jammed or fitted with a patented keyway may not open cleanly, and occasionally drilling is the honest answer. We'll tell you before doing it, explain the replacement, and still leave every door on your new key before we pack up.

How Lakewood shapes the job

Older homes in Lakewood often carry decades of key history: original knob locks, deadbolts added by a later owner, maybe a rim lock on a back door. Vintage cylinders can be stiff or corroded, and some original hardware isn't worth re-pinning. During a post-purchase rekey, we'll tell you which locks deserve new pins, which deserve retirement, and whether those older doors and frames will hold a modern deadbolt properly.

Long commutes shape how you rekey. Many buyers in Lakewood leave before dawn and get home after dark, so the house sits empty most of the day. We start at 6:30 a.m. every day and work until 11:30 p.m. That makes a before-work or evening rekey realistic. Since the garage entry is often your everyday front door, that lock gets extra attention, and a keypad deadbolt can spare you a lockout at five in the morning.

Where rental housing is dense, a purchase is often a condo carved from a former apartment building or a small multi-unit property with tenants in place. Rekey your own unit right away. For occupied units, California generally expects reasonable written notice before entry, with 24 hours presumed reasonable, and the tenant needs new keys the same day. Civil Code §1941.3 also requires working deadbolts on the main entry doors of rental units.

Situations this covers

• Picture a buyer relocating for a job who closes remotely, flies in Thursday night and has movers booked for Friday morning. The sensible move is the first slot of the day: we can start at 6:30 a.m. on a Friday, rekey the exterior doors, reset the keypad and hand over keys before the truck pulls up. Friday service runs until 11:30 p.m., but morning is still the right call here.
• Picture a buyer who agreed to a three-week rent-back so the sellers could finish packing. The temptation is to rekey at closing, but the sellers still live there. The better plan is booking the rekey for the morning they hand over the keys, then cutting new ones before the movers back into the driveway. Coordinating that around an escrow timeline is routine work for us.
• Say you buy a newly built home and assume the locks are pristine. Builders often use construction keying, where the crew's key is supposed to quit working after your first key turns. A locksmith would test each cylinder with the construction key if one is available, confirm the change took, and rekey anything that didn't. It's a short visit that replaces assumption with certainty.
• Suppose you buy a townhome in an HOA community. Your unit's front door and patio gate are yours to rekey, but the pool gate, mailbox units and common doors usually belong to the association. We'd rekey your unit, change your mailbox compartment lock if the HOA allows it, and point you to the management office for pool and gate fobs.

Step by step with Julian's Locksmith

1. Book around your possession date. Call (951) 903-3193 as soon as you know when you'll get the keys. Tell us the closing date, whether the sellers are renting back, and roughly how many exterior doors the house has. We'll schedule the rekey for possession day or the first visit after, before your movers if possible.
2. Bring proof of ownership. If someone else will meet us, such as a spouse who isn't on title, a relative or a property manager for an out-of-area buyer, they need the owner's written authorization plus copies of the ownership documents. We may also call the owner to confirm. It's a little extra effort, and it's the same check we'd want for our own homes.
3. Walk the property and count cylinders. Together we walk every exterior opening: front, back, side and garage entry doors, keyed patio handles, gates, sheds and the mailbox. We note brands, keyways and condition, and ask which areas you'd like on one key. That list becomes the written quote, so nothing gets added without your approval.
4. Re-pin each cylinder. Your new combination comes from a fresh code, not a variation on the seller's key. We cut keys on a code machine to the manufacturer's depth and spacing specifications, keeping neighboring cuts within the allowed limits so the key turns smoothly and doesn't wear early. Kwikset SmartKey cylinders are reset with their own tool instead of loose pins.
5. Reset codes and test every key. Then it's your turn. You operate each lock yourself with the new key, enter your keypad codes, and see how the smart lock behaves from the app and from the door. We show you where the batteries go, what the low-battery warning looks like, and where the backup key works, so nothing surprises you later.
6. Hand over the keys and the record. You receive the number of keys you asked for and a work record showing which locks were rekeyed and which combination they share, so future copies match. We'll remind you about the garage opener, alarm company and HOA fobs, the remaining items on a new homeowner's access checklist.

Pricing factors

• High-security and smart locks. High-security systems often come with a key card that proves who may order copies. If the sellers handed it over, the cylinders can usually be re-pinned or re-registered through an authorized channel. If the card is gone, replacing those cylinders may be the practical route. Either way, we'll explain the options and their costs before you commit.
• Number and type of new keys. Cutting extra copies while we're already there is efficient, since our code machine is set to your combination. Standard keys can be duplicated later at many counters; restricted keys come back through us. Colored key caps or a tag for the workshop key cost little and make a shared ring easy to sort without labeling it with your address.
• Scheduling and location. Bundling saves a return trip. If you plan to add a deadbolt to the garage entry, install a smart lock or replace a failing patio handle, doing it during the rekey means one visit instead of two, and travel is part of every quote. Splitting the work across separate appointments is fine too, but each trip adds to the total.

Every job gets a clear quote before any work starts. Call (951) 903-3193 with the details and we'll tell you what to expect for your situation in Lakewood.

Common errors that cost time and money

• Ignoring codes and electronic access. A rekeyed deadbolt with the seller's keypad code still active, or a smart lock still linked to their app, leaves the door open to them. The same goes for garage remotes and alarm codes. Reset everything programmable on the same day the keys change.
• Tackling a DIY rekey kit on a mix of brands without knowing what you have. Kits are brand-specific, Kwikset SmartKey cylinders need their own tool, and springs lost under a sofa end many weekend projects. A locksmith visit handles every brand at once and leaves each lock tested.
• Replacing perfectly good locks when rekeying would do. If the hardware works smoothly and you like how it looks, new pins and keys solve the access problem for much less. Replacement makes sense for worn, damaged, low-grade or mismatched locks, or when you want a smart lock upgrade.

Advice before you book

• Test each deadbolt with the door closed. If you have to push, pull or lift the door before the bolt will throw, the strike is out of line, and the bolt may not be fully extended even when it feels locked. A small strike adjustment fixes it, and a bolt that seats completely is far harder to force back.
• Schedule the rekey before movers arrive. Once boxes and furniture are inside, you're protecting more behind locks whose key history is unknown, and moving day itself brings helpers through every door. Even a morning appointment on possession day, before the truck shows up, closes that gap.
• Erase the garage door opener's memory using the learn button on the motor unit, then reprogram only your own remotes and car buttons. Change the exterior keypad code too. A seller's old remote clipped to a visor, or a code shared with a landscaper, can open the big door long after the locks are rekeyed.
• Keep your closing statement or recorded deed handy for the locksmith visit. Your driver's license still shows your old address, so these documents are what prove the house is yours. A digital copy on your phone usually works and keeps the ownership check to a minute or two.

Reaching Lakewood

Lakewood is about 62 miles from our San Bernardino base, roughly 68 minutes in light traffic via University Parkway to I-215 South. When you call, you get an arrival estimate based on where the technician is and the traffic at that moment.

If you're close to SR-91, tell us which exit or cross street you're nearest. It trims the last mile and keeps the van from circling a block that looks right on the map but isn't.

About Lakewood: The city covers about 9.5 square miles, with roughly 150 miles of streets, 300 miles of sidewalks and more than 36,000 trees along its streets and in its parks.

Planning a rekey in Lakewood?

Call (951) 903-3193 and tell us how many doors you want on the new key and the brand of the locks if you know it. We'll quote the rekey before any work starts.