Rekey All House Locks in Lakewood: Doors, Gates and Codes

What to know first in Lakewood

All means more than most people expect. On a typical single-family home, the list starts with the front door, which often has two cylinders: a deadbolt plus a knob or lever, or a handleset whose key lives in the deadbolt. Add the back door, the door from the garage into the house, and the garage side door, each commonly with a knob and a deadbolt. Then come the outliers: a steel security screen with its own cylinder, French doors with a euro cylinder, a slider with a small keyed latch, a side gate with a keyed deadbolt or rim lock, an RV gate padlock, a shed, a casita or a keyed home office. Some homes also have keyed window locks or a manual T-handle on an older overhead garage door. Mailboxes are separate: they're small cam locks with their own keys, and cluster boxes follow post office or HOA rules. When you set out to rekey all house locks, the first job is writing that list down, because a cylinder that never makes the list never gets re-pinned.

Work included on a typical visit

• Re-pinning every exterior door. The core of the job is re-pinning each exterior door cylinder to the new key: deadbolts, knobs, levers and handlesets on the front, back and side entries. We work one door at a time, test it locked and unlocked from both sides, and only then open up the next. Your house is never left with several doors apart.
• Gates, fences and pool enclosures. Pool gates come with a safety requirement: California's pool safety rules expect them to close and latch on their own. When we rekey a pool gate lock, we check that the gate still swings shut and catches without help. A keyed gate that has to be pulled closed by hand isn't doing its job.
• Outbuildings, casitas and padlocks. Sheds, workshops, pool houses and casitas tend to collect a random assortment of knobs, deadbolts and padlocks. Any door lock with a standard pin tumbler cylinder can join the house key or a separate outbuilding key. Rusted locks on the far side of the yard often make more sense to replace than to re-pin.
• Bringing mixed brands onto one key. Most houses end up with mixed hardware over the years. To rekey all house locks to one key, we choose the keyway you already have the most of, re-pin those cylinders, and replace the outliers with locks or cylinders in that keyway. Usually that means swapping two or three locks, not the whole house.
• Replacing the locks that shouldn't be rekeyed. If a door has suffered a forced entry, the lock may be the smallest part of the problem. A split jamb or a cracked strike area needs repair before any lock will hold. We tell you what we see, handle the lock and strike reinforcement, and suggest a carpenter when the frame itself needs rebuilding.

What's different about Lakewood

Houses built before 1980 in Lakewood often show their age at the keyhole: brass knobs from the 1950s, a deadbolt added in the 1980s, a mortise lock on the front door and a different brand in each room. A whole-house rekey here begins with an honest look at which pieces still work. Original mortise sets can often be rebuilt and re-pinned, while worn knobs and loose latches are better replaced. We aim to keep the character and still end up on one key.

Family homes in Lakewood tend to accumulate keys: the babysitter, the grandparents, a neighbor who waters plants and a teenager who has lost three copies of their own. A whole-house rekey brings the key count back to something you can manage. We usually suggest a small number of new keys, a keypad or smart lock code for kids and visitors, and a clear plan for who can reach the garage and side gate.

Situations this covers

• A recently flipped house near Angelo M. Iacoboni Library has Schlage hardware on the front, Kwikset on the back, an unbranded deadbolt on the garage door and a mystery brand on the slider. The owner wants one key. We pin the keyway with the most locks, replace the two outliers with matching hardware and cut three keys. Most of the original hardware stays, so the job is smaller than a full replacement.
• A burglar finds the spare key hidden under a flowerpot and walks in through the front door. After the police report, the family decides rekeying one door isn't enough, since the same key opened the back door and the garage entry. We re-pin every cylinder, retire the hiding spot and suggest a keypad entry for visitors.
• After a separation, a homeowner in Lakewood wants every lock changed before her partner collects his belongings. The front door is the obvious one, but the walk-through turns up nine more cylinders: the garage side door, a slider latch, two gates, a shed and more. We re-pin them all to one new key during a single visit, and she sets a fresh code on her smart lock before we leave.
• A homeowner uses a kit on the front and back doors, then learns months later that the garage side door still opens with the old key. Nobody wrote that door down. A whole-house count prevents exactly this gap. We list every keyhole first, including screens and the knob under the deadbolt, and the job isn't finished until each one has been tried with the new key.

How the visit works

1. Count the keyholes before we arrive. Walk your property before you call and note every keyed lock, including the knob beneath the deadbolt, security screens and gates. Photos of each help. A short look now saves surprises later, and it tells us whether one visit can cover everything.
2. Gather every key and show you belong at the address. We confirm you own or lawfully occupy the home before touching a cylinder. Photo ID plus a utility bill, mortgage statement, lease or similar proof works. For an inherited house, we may ask to see the paperwork showing you can act for the estate.
3. Agree on the key plan before any pins come out. Choose the structure first: one key for the whole house, a second for the outbuilding, perhaps a master. We sketch it door by door and write down how many keys of each you want. Changing the plan afterward means pulling cylinders twice.
4. Rekey one door at a time and test as we go. We work in an order that keeps you secure: exterior doors first, then the garage, then gates and outbuildings. If your schedule allows only part of the job on one day, the most exposed doors are the ones finished first.
5. Cut, count and test every key. We'll hand you a short list showing which door takes which key. Keep it private, since it shows how your keys work. If you ever add a lock, the list tells you which keyway and key to match.
6. Reset what rekeying doesn't touch. Rekeying changes metal keys only. Garage remotes, keypad codes, smart lock users, alarm codes and any lockbox are separate. We walk through each with you and help with the ones we handle, so the old ways in are closed on the same day.

How we quote the job

• How many keyways are in the mix. Locks that share a keyway can be pinned to one key at modest cost. A house with Kwikset, Schlage and an unbranded deadbolt needs more: replacement cylinders or locks to bring the outliers into line. We quote the as-is route and the one-key route separately.
• Locks at the edge of the property. Padlocks are the swing factor. If yours have rekeyable cylinders, they take little time. Budget padlocks that can't be rekeyed must be replaced with new ones keyed alike. Bring a list or let us count them on the walk-through. Gate and shed locks see the most weather, so they are often the ones that need replacing.
• Key plan, key count and timing. Hours and distance play a role. We work every day from 6:30 a.m. to 11:30 p.m., weekends included. A planned daytime slot is easier to schedule than an urgent evening call. The drive from our San Bernardino base counts too, so share your address and any gate code when you book.

Every job gets a clear quote before any work starts. Call (951) 903-3193 with the details and we'll tell you what to expect for your situation in Lakewood.

What not to do

• Making copies from copies at a kiosk. A key duplicated from a worn duplicate drifts from the original cuts, and a few generations later it sticks or fails. Cut all later keys from your stored master, and keep a count of how many exist.
• Forgetting the codes, fobs and hidden spares. New metal keys don't change a garage keypad, a smart lock user list, a lockbox left from a sale or a spare in the planter. Walk the list of other ways in, and reset each one the same day.
• Skipping the garage side door and the door from the garage into the house. These two are among the most commonly lent out and the most commonly forgotten. If either one stays on the old key, anyone holding that key still has a way into your home.

Practical tips before you call

• Keep house keys off the ring you hand to valets and mechanics. A shop can copy a house key as easily as a car key, and a parking attendant sees your registration and your address. Carry a small separate key for the car and keep the house key in your pocket.
• Plan for two key sets: one carried every day, one stored. The daily set gets used, lost and copied. The stored set stays in a locked box or with a trusted relative and comes out only when something goes wrong. Cut future duplicates from the stored key, never a worn one.
• Use every new key on day one. Try each in its lock from outside with the door closed behind you. A key that sticks now is a fixable problem. One that fails a month later is much harder to diagnose, and we'd rather adjust it while the tools are still out.
• Tell your alarm company about the change. Their keyholder and password lists often name people who no longer need access. Update the monitoring contacts, reset the alarm code and remove old users from the panel and app so every list matches the new key plan.

Service in Lakewood

Lakewood is about 62 miles from our San Bernardino base, roughly 68 minutes in light traffic via University Parkway to I-215 South. When you call, you get an arrival estimate based on where the technician is and the traffic at that moment.

Stuck on the shoulder or in a parking lot along South Street? Get somewhere safe, turn on your hazards, and give us the nearest exit or business so we can find the car without guessing.

About Lakewood: Lakewood incorporated on April 16, 1954, and became the first American city to contract for all of its municipal services, an approach called the Lakewood Plan that later cities copied.

Planning a rekey in Lakewood?

Call (951) 903-3193 and tell us how many doors you want on the new key and the brand of the locks if you know it. We'll quote the rekey before any work starts.