How to Rekey All House Locks in Artesia in One Visit

What to expect in Artesia

People sometimes ask why they should rekey all house locks when only one key is known to be missing. The honest answer is that keys spread in ways nobody tracks. A standard house key can be copied at a hardware store kiosk in seconds, and a Do Not Duplicate stamp is a request, not a barrier. A key loaned to a contractor may have been copied for a helper. A key you think fits only the back door may also open the front if a previous owner keyed them alike. If you can't account for every copy, partial rekeys leave gaps you can't see. Rekeying everything at once closes them in one step, and it's far less expensive than replacing every lock, because the knobs, deadbolts, handlesets and finishes stay on your doors. The other benefit is a fresh start on key control: a known number of new keys, given to people you chose, with a written list of who holds one.

Work included on a typical visit

• Garage access points. Older overhead doors sometimes still have a keyed handle in the center panel, often seized from years of disuse. We can usually re-pin or replace that cylinder, or remove its function if the door runs on an opener and you'd rather not have an extra keyhole. Either way, no old key opens the garage afterward.
• Gates, fences and pool enclosures. Gate hardware lives outdoors full time, so cylinders there are often the grittiest on the property. Some clean up and re-pin well; others are rusted past saving. We tell you which is which, and where a gate lock needs replacing, we fit a weather-resistant one keyed to the same key as the rest of the house.
• Bringing mixed brands onto one key. Most houses end up with mixed hardware over the years. To rekey all house locks to one key, we choose the keyway you already have the most of, re-pin those cylinders, and replace the outliers with locks or cylinders in that keyway. Usually that means swapping two or three locks, not the whole house.
• Separate keys and simple master keying. For most single-family homes, the best plan is the simplest one that fits how you live. One key for the house, perhaps one for an outbuilding, and keypad codes for occasional visitors usually covers it. We'll suggest a structure, but you choose, and the plan is written down before any pins come out.
• Smart locks, keypads and lockboxes. Smart locks with a backup key cylinder, such as the Schlage Encode or Kwikset Halo, get re-pinned like any other lock. What re-pinning doesn't change are the codes, fingerprints and app users. During a whole-house rekey, we help you delete old codes, check admin access and confirm the motor still throws the bolt properly.

What's different about Artesia

Houses built before 1980 in Artesia often show their age at the keyhole: brass knobs from the 1950s, a deadbolt added in the 1980s, a mortise lock on the front door and a different brand in each room. A whole-house rekey here begins with an honest look at which pieces still work. Original mortise sets can often be rebuilt and re-pinned, while worn knobs and loose latches are better replaced. We aim to keep the character and still end up on one key.

Family homes in Artesia tend to accumulate keys: the babysitter, the grandparents, a neighbor who waters plants and a teenager who has lost three copies of their own. A whole-house rekey brings the key count back to something you can manage. We usually suggest a small number of new keys, a keypad or smart lock code for kids and visitors, and a clear plan for who can reach the garage and side gate.

Example situations

• A homeowner with security screens on the front and rear doors finds that each screen takes a different key from the main doors. The mismatch means a ring of five keys for one household. During a whole-house rekey, we convert the rekeyable screen cylinders to the house key and replace the one stubborn screen lock with a model that matches.
• After a separation, a homeowner in Artesia wants every lock changed before her partner collects his belongings. The front door is the obvious one, but the walk-through turns up nine more cylinders: the garage side door, a slider latch, two gates, a shed and more. We re-pin them all to one new key during a single visit, and she sets a fresh code on her smart lock before we leave.
• Over twenty years, a family in Artesia has handed spare keys to neighbors, a pet sitter, two babysitters, a visiting cousin and a long-gone housemate. Nobody can say who still has one. Instead of chasing each key, the couple rekeys every lock and decides to issue just three new keys, with a keypad code for anyone who needs occasional access.
• A seller wants one key for the agent's lockbox, so showings, the photographer and the inspector all use the same key. We rekey the front, back, garage entry and side gate before the sign goes up. The seller hands the new keys to the escrow officer at closing, and every earlier copy is already useless.

From your call to the finished job

1. Count the keyholes before we arrive. Tell us why you're rekeying. A separation, an inherited house and years of loaned copies call for slightly different plans. Knowing the reason helps us ask about codes, remotes and hidden spares you might not think to mention.
2. Gather every key and show you belong at the address. No working key for a few locks? Say so. We can still rekey them after verifying who you are, though locks that have to be opened or removed first take longer. Give us the history and we'll bring the right tools.
3. Agree on the key plan before any pins come out. Choose the structure first: one key for the whole house, a second for the outbuilding, perhaps a master. We sketch it door by door and write down how many keys of each you want. Changing the plan afterward means pulling cylinders twice.
4. Rekey one door at a time and test as we go. We pull each cylinder, empty the old pins, rebuild it to the new code and reinstall it. Then we cycle it from both sides before moving on, so the house is never left with several doors half-finished while we work.
5. Cut, count and test every key. We'll hand you a short list showing which door takes which key. Keep it private, since it shows how your keys work. If you ever add a lock, the list tells you which keyway and key to match.
6. Reset what rekeying doesn't touch. Rekeying changes metal keys only. Garage remotes, keypad codes, smart lock users, alarm codes and any lockbox are separate. We walk through each with you and help with the ones we handle, so the old ways in are closed on the same day.

What affects the cost

• Condition of the oldest and cheapest locks. Sun and sprinkler overspray age exterior hardware faster than interior hardware. Expect the side gate and back door to be the hardest. A bit of cleaning and fresh springs revives many locks, while others have simply reached the end. We'll tell you which is which.
• Specialty, high-security and smart-lock cylinders. Smart locks add a step: removing the unit, re-pinning the backup cylinder, reinstalling it and testing the motor. Retrofit models like August and Level add less than full replacements like Schlage Encode or Kwikset Halo. We tell you what your model needs.
• Locks at the edge of the property. Padlocks are the swing factor. If yours have rekeyable cylinders, they take little time. Budget padlocks that can't be rekeyed must be replaced with new ones keyed alike. Bring a list or let us count them on the walk-through. Gate and shed locks see the most weather, so they are often the ones that need replacing.

Every job gets a clear quote before any work starts. Call (951) 903-3193 with the details and we'll tell you what to expect for your situation in Artesia.

What not to do

• Skipping the garage side door and the door from the garage into the house. These two are among the most commonly lent out and the most commonly forgotten. If either one stays on the old key, anyone holding that key still has a way into your home.
• Forgetting the codes, fobs and hidden spares. New metal keys don't change a garage keypad, a smart lock user list, a lockbox left from a sale or a spare in the planter. Walk the list of other ways in, and reset each one the same day.
• Keeping the old keys just in case. They open nothing after the rekey, but a drawer of dead keys confuses everyone later and tempts someone to hand one out. Recycle them, and keep only the new, labeled set and one stored master copy.

Practical tips before you call

• Tell the people who legitimately need access before the rekey, and hand out their new keys the same day. A mother-in-law who can't get in the next morning is a more common headache than a break-in. Write down who needs what: pet sitter, gardener, grown kids.
• Draw a rough floor plan and mark every keyed lock on it before we arrive. Include the ones you've never used, and check both faces of each door, since a keyhole on only one side still counts. That quick sketch becomes the backbone of your key record afterward.
• If you own a smart lock, have your phone ready with the app and admin access. Rekeying the backup cylinder doesn't touch app users or codes, and resetting them needs your login. Remove old users by name, not just the code you happen to remember.
• Keep house keys off the ring you hand to valets and mechanics. A shop can copy a house key as easily as a car key, and a parking attendant sees your registration and your address. Carry a small separate key for the car and keep the house key in your pocket.

Reaching Artesia

Artesia is about 63 miles from our San Bernardino base, roughly 66 minutes in light traffic via Palm Avenue to I-215 North, I-15 South to I-10 West. When you call, you get an arrival estimate based on where the technician is and the traffic at that moment.

Once the evening commute thins out on SR-91, drive times usually shrink. That makes an evening call before closing a practical option for non-urgent jobs that you couldn't fit into the workday.

About Artesia: The city is named for the artesian wells that watered local farms, and by 1885 growers were selling Artesia grapes to wineries in Downey and Anaheim.

Planning a rekey in Artesia?

Call (951) 903-3193 and tell us how many doors you want on the new key and the brand of the locks if you know it. We'll quote the rekey before any work starts.