How to Rekey All House Locks in Irvine in One Visit

What to expect in Irvine

All means more than most people expect. On a typical single-family home, the list starts with the front door, which often has two cylinders: a deadbolt plus a knob or lever, or a handleset whose key lives in the deadbolt. Add the back door, the door from the garage into the house, and the garage side door, each commonly with a knob and a deadbolt. Then come the outliers: a steel security screen with its own cylinder, French doors with a euro cylinder, a slider with a small keyed latch, a side gate with a keyed deadbolt or rim lock, an RV gate padlock, a shed, a casita or a keyed home office. Some homes also have keyed window locks or a manual T-handle on an older overhead garage door. Mailboxes are separate: they're small cam locks with their own keys, and cluster boxes follow post office or HOA rules. When you set out to rekey all house locks, the first job is writing that list down, because a cylinder that never makes the list never gets re-pinned.

Work included on a typical visit

• Garage access points. Older overhead doors sometimes still have a keyed handle in the center panel, often seized from years of disuse. We can usually re-pin or replace that cylinder, or remove its function if the door runs on an opener and you'd rather not have an extra keyhole. Either way, no old key opens the garage afterward.
• Gates, fences and pool enclosures. Gate hardware lives outdoors full time, so cylinders there are often the grittiest on the property. Some clean up and re-pin well; others are rusted past saving. We tell you which is which, and where a gate lock needs replacing, we fit a weather-resistant one keyed to the same key as the rest of the house.
• Separate keys and simple master keying. For most single-family homes, the best plan is the simplest one that fits how you live. One key for the house, perhaps one for an outbuilding, and keypad codes for occasional visitors usually covers it. We'll suggest a structure, but you choose, and the plan is written down before any pins come out.
• Smart locks, keypads and lockboxes. Keypads, lockboxes and hidden spares are the access points people forget once the keys are changed. A lockbox left from a sale, a code shared with a former cleaner, a magnetic key holder under the bumper of a car you sold: we ask about each one, because a whole-house rekey only works if the side doors are closed too.
• Key cutting, key count and a key record. Keep one key cut from code as your master copy and make future duplicates from it, not from a worn copy. If you'd like restricted keys that can't be copied at a kiosk, ask about upgrading the main entry cylinders. That's a different job from a standard rekey, so we'll explain the options separately.

What's different about Irvine

Family homes in Irvine tend to accumulate keys: the babysitter, the grandparents, a neighbor who waters plants and a teenager who has lost three copies of their own. A whole-house rekey brings the key count back to something you can manage. We usually suggest a small number of new keys, a keypad or smart lock code for kids and visitors, and a clear plan for who can reach the garage and side gate.

Condos and townhomes in Irvine share walls, hallways, garages and sometimes a lobby, so not every lock on your door is yours to change. Unit entry locks are normally yours, while building entries, mailboxes and garage gates usually belong to the association. Before you rekey all house locks, read your HOA rules on exterior door hardware. We rekey what you control, match any required finish, and tell you which doors to leave alone.

Gated communities add layers: the HOA controls the main gates and pedestrian entries, while you control your own doors. Rekeying all house locks in Irvine covers your property only, so we leave common-area gates, mailbox clusters and clubhouse doors alone. Check your CC&Rs for exterior hardware rules, and include your garage remote and guest-code settings in the reset plan. Visitor codes on the community system are worth updating too.

Example situations

• A homeowner converts a detached garage into a rental unit with its own door and a small side gate. She wants her key to open everything, while the tenant's key opens only the unit and the gate. We rekey the entire property with a two-level setup, so the tenant's key can never reach the main house, and we record which cylinders carry the extra pins.
• A seller wants one key for the agent's lockbox, so showings, the photographer and the inspector all use the same key. We rekey the front, back, garage entry and side gate before the sign goes up. The seller hands the new keys to the escrow officer at closing, and every earlier copy is already useless.
• On a half-acre lot off Portola Parkway, a homeowner has a workshop, a detached garage, an RV gate, a pool equipment shed and seven padlocks, with a few keys scattered among them. We rekey or replace each lock, key the pool shed apart from the house so the pool service never needs a house key, and tag every padlock key by number, not by name.
• A homeowner installs a Schlage Encode on the front door and considers the house secured. The back door, garage entry and side gate still use the old key that a former contractor copied. We rekey those to match the Encode's backup cylinder, so a single physical key opens everything, and we show her how to prune old app users.

How the visit works

1. Count the keyholes before we arrive. Tell us why you're rekeying. A separation, an inherited house and years of loaned copies call for slightly different plans. Knowing the reason helps us ask about codes, remotes and hidden spares you might not think to mention.
2. Gather every key and show you belong at the address. We confirm you own or lawfully occupy the home before touching a cylinder. Photo ID plus a utility bill, mortgage statement, lease or similar proof works. For an inherited house, we may ask to see the paperwork showing you can act for the estate.
3. Agree on the key plan before any pins come out. This is the moment to decide about odd locks. A rusted gate latch, a worn knob or a slider with no cylinder may be replaced, left off the plan or handled separately. We explain your options for each and quote them before work begins.
4. Rekey one door at a time and test as we go. While a cylinder is out, we clean it and replace tired springs. Locks that drag, stick or spin loosely go on the list. You'll hear what we find as we go, not only at the end, and you can approve fixes door by door.
5. Cut, count and test every key. We'll hand you a short list showing which door takes which key. Keep it private, since it shows how your keys work. If you ever add a lock, the list tells you which keyway and key to match.
6. Reset what rekeying doesn't touch. Cut up or recycle the old keys so they can't be mistaken for current ones. Don't keep them just in case. Then store your master copy somewhere safe and away from the house, with the key list kept separately.

How we quote the job

• How many keyways are in the mix. Standardizing can pay off beyond today's visit. A single keyway makes future locks and rekeys easier to match. If you were planning to replace a few worn locks anyway, doing it during a whole-house rekey often saves a separate trip.
• Condition of the oldest and cheapest locks. Sun and sprinkler overspray age exterior hardware faster than interior hardware. Expect the side gate and back door to be the hardest. A bit of cleaning and fresh springs revives many locks, while others have simply reached the end. We'll tell you which is which.
• Locks at the edge of the property. Not everything at the edge is yours to change. Cluster mailboxes, HOA gates and utility enclosures belong to someone else. We point out what's out of bounds so the quote covers only what you can legally and practically change. That avoids paying for work you can't use.

Every job gets a clear quote before any work starts. Call (951) 903-3193 with the details and we'll tell you what to expect for your situation in Irvine.

Common errors that cost time and money

• Forgetting the codes, fobs and hidden spares. New metal keys don't change a garage keypad, a smart lock user list, a lockbox left from a sale or a spare in the planter. Walk the list of other ways in, and reset each one the same day.
• Making copies from copies at a kiosk. A key duplicated from a worn duplicate drifts from the original cuts, and a few generations later it sticks or fails. Cut all later keys from your stored master, and keep a count of how many exist.
• Rekeying everything to one key before deciding what shouldn't share it. A casita, workshop or rented room often deserves its own key. Settling the structure first costs nothing, while re-pinning cylinders a second time costs time and parts. Decide first, then pin once.

Practical tips before you call

• Plan for two key sets: one carried every day, one stored. The daily set gets used, lost and copied. The stored set stays in a locked box or with a trusted relative and comes out only when something goes wrong. Cut future duplicates from the stored key, never a worn one.
• Look past the key at the door itself. A deadbolt with a short throw, or a strike plate held by half-inch screws, is a weak spot no new key fixes. Ask us to check strikes and hinge screws while we're there; longer screws into the framing make a real difference.
• Keep house keys off the ring you hand to valets and mechanics. A shop can copy a house key as easily as a car key, and a parking attendant sees your registration and your address. Carry a small separate key for the car and keep the house key in your pocket.
• Retire the hide-a-key. Fake rocks, planter bases and doormat spots are the first places a burglar looks. Give a spare to a trusted person, or switch visitors to a keypad code you can change. If you do keep a key outside, lock it in a hardened box.

Getting to Irvine

Irvine is about 58 miles from our San Bernardino base, roughly 62 minutes in light traffic via I-215 South to SR-91 West in Riverside, SR-91 West through Corona and Santa Ana Canyon. When you call, you get an arrival estimate based on where the technician is and the traffic at that moment.

If you're close to Alton Parkway, tell us which exit or cross street you're nearest. It trims the last mile and keeps the van from circling a block that looks right on the map but isn't.

About Irvine: The San Joaquin Wildlife Sanctuary, managed by the Irvine Ranch Water District, protects freshwater marsh and ponds near UC Irvine and draws bird watchers year-round.

Planning a rekey in Irvine?

Call (951) 903-3193 and tell us how many doors you want on the new key and the brand of the locks if you know it. We'll quote the rekey before any work starts.