A Repeatable Tenant Turnover Rekey for Fullerton Properties

How this works in Fullerton

Where the rekey sits in the make-ready decides whether it holds anything up. Cylinders dislike paint, drywall dust and adhesive, so the cleanest spot is after painting, touch-ups and the deep clean, and before the final inspection. If crews need access during the turn, hand them a temporary key and make the rekey the last lock-related step. Schedule it for the day the unit is otherwise ready rather than the day it becomes vacant, because lock work can usually be done in an empty, finished unit with almost no setup. Build the slot into your checklist with a name, such as lock reset, and a clear owner. When the step is on the board, it gets done. When it lives in someone's head, it gets skipped during a busy week. A well-placed slot also protects finished work, because nobody wants a technician removing hardware around fresh paint on move-in day. Treat the lock slot like any other trade's.

What we can do on-site

• Setting a rekey-every-turn policy. A written policy beats good intentions. State what gets rekeyed (all exterior cylinders and any unit-controlled locks), when (after make-ready work), who authorizes it (manager or owner) and what gets recorded. We can draft that language with you, and we'll tell you honestly which parts are legal questions for your attorney.
• Re-pinning to a fresh bitting on the same keyway. For most conventional units, we keep the existing Kwikset or Schlage hardware and re-pin each cylinder to a new key cut. The keyway stays standard, so replacements are easy to source. We pick the new bitting so it differs from the previous one and avoids duplicating neighboring units' cuts, then record it for the unit file.
• Rekeying units on a master key system. In a master-keyed building, each cylinder accepts the unit key and the maintenance master. We rekey the unit key while preserving the master cut, which means working from your bitting records or charting the system first. After the work, the old resident key fails and your master still works. We test both at every door.
• Keyed-alike sets per unit. Keyed alike within a unit doesn't mean keyed alike across the building. Each unit needs its own change key, or one resident's key opens a neighbor's door. We keep each unit's pinning distinct, label the sets by unit number, and note any shared locks, like a gym or laundry room, that sit on separate keys.
• Hot turns: same-day move-out and move-in. When a resident leaves in the morning and the next arrives that afternoon, the rekey must slot in after the cleaners and before keys change hands. Tell us the turn dates when you book. We'll plan the window, confirm an honest arrival estimate and bring cut keys so you can hand over the set the same day.

Local factors in Fullerton

Residential units above downtown storefronts often share street doors and stairwells with commercial tenants, which turns a unit rekey into a coordination exercise. Rekey the unit, then ask the building owner whether the street door and stair door should be re-pinned as well. Keep the keys for shared doors separate from unit keys so a unit turn doesn't disturb other tenants' access.

Older rental houses and fourplexes tend to carry decades of mixed hardware, and a turn is the time to see what's really there. We rekey what's healthy, flag what's worn and quote replacements that move the building toward one keyway. In older neighborhoods around Laguna Lake, painted-over strike plates and warped doors also show up, so we check how each bolt throws before closing out a unit.

Apartment communities in Fullerton turn units constantly, and the rekey works best as a standing routine: a fixed slot in the make-ready, a unit list sent ahead, and a key count back for every door. If your building runs on a master system, tell us before the first visit so we plan around the records. Common-area locks such as laundry and mail rooms stay on their own keys and are not part of a unit rekey.

Example situations

• It's Saturday at 11 p.m., the final inspection is Monday morning, and the lock step isn't done. We close at 11:30 p.m., so we'd be honest that tonight isn't realistic. The manager books Sunday from 6:30 a.m., the unit is rekeyed before Monday's inspection, and next time lock work goes onto the checklist earlier in the turn.
• Student housing flips almost all at once. Imagine a complex near Fullerton Municipal Airport with leases ending the same week in spring and new groups arriving in late summer. The manager sends a unit list weeks ahead so we can plan route days across the gap. We make no promise of dozens of units in one day, but with notice we can sequence them and keep the lock step from becoming the bottleneck.
• Picture a 24-unit complex off Commonwealth Avenue with a maintenance master and a half-complete set of bitting records. A turn is coming up and the manager wants the rekey done without breaking the master. We survey the cylinders, confirm the master cut from the units we can open, rekey the vacated unit's change key and test both keys. Our notes become the start of a proper key record for the building.
• A condo owner who rents a unit in Fullerton deals with an HOA that controls the front-gate fob and the mailbox. When the resident leaves, the owner books us for the door lock and emails the association about the fob. The key record shows three separate access items with three separate owners, so nothing falls through the cracks.

From your call to the finished job

1. Add the lock step to your turn checklist. Write the step as one line your whole team can follow: all exterior cylinders re-pinned, new keys cut to the agreed count, old keys destroyed or filed, and key log updated. Short and specific works. We can review your checklist and suggest where the step usually fits best for your type of property.
2. Send the turn list. Email or call with the units due this week: unit numbers, number of exterior doors, any lock brands you know, whether doors are keyed alike or master-keyed, and the dates the next residents arrive. A shared spreadsheet works fine. The more complete the list, the more accurate the quote.
3. Quote and slot the visit. Pricing follows cylinders and units, with the details you gave us. We call out anything that could change the number, such as a master-keyed door or a restricted keyway. Then we propose a day. If you need a hot turn, say so now, and we'll give you an honest sense of what's realistic.
4. Authorization and access. California's Locksmith Act is why we ask for authority before touching a lock, even for a property you manage every day. It also protects you from someone claiming to represent an owner. Our license, LCO7891, can be checked at search.dca.ca.gov before we arrive.
5. Rekey, cut and test, unit by unit. Inside each unit, we work through the cylinders in a fixed order, re-pin to the new bitting, cut the keys and test. New key works, old key fails, master still works where one exists. We repeat that test at every lock, mark the unit complete and move to the next.
6. Close out with a key log and an invoice by unit. Close the loop in your own records the same day: update the key log, note the rekey date on the unit file and file the work sheet. If your software tracks work orders, attach our sheet. A clean record at close-out is what makes the next turn quick.

What affects the cost

• Cylinders per unit and units per trip. The basic drivers are the number of cylinders in each unit and the number of units we handle in one visit. A studio with one entry lock is a small job; a townhome with a front door, patio, garage and storage is larger. Batching several units cuts repeated travel and setup, which is why larger turn lists tend to price better per unit.
• Key system: different, alike or master-keyed. Master-keyed work needs records. With bitting records, a rekey is routine. Without them, we may need to survey cylinders to chart the system, which adds time that's worth spending once. Ask whoever installed the system, or check your files, before the first turn so the quote reflects reality.
• Key counts and key type. Each key is cut and checked, so the count affects the total. Decide how many keys per resident and how many controlled spares your office keeps. We cut exactly the number you ask for, label the sets and price each key separately, so the quote matches what you hand out.

Every job gets a clear quote before any work starts. Call (951) 903-3193 with the details and we'll tell you what to expect for your situation in Fullerton.

Mistakes to avoid

• Rekeying before the make-ready is done. Paint, dust and adhesive end up in the cylinders, and a new key can get stiff within weeks. Contractors who already hold cut keys keep access, too. Schedule the lock step after the last trade and before the final inspection.
• Cutting too many spares. Extra keys float around offices, trucks and desk drawers. Each one needs tracking, and the more there are, the likelier one goes missing. Set a fixed count per unit and per office. A fixed count and a signed log keep the number honest.
• Booking lock work last. When the rekey is the final item and the move-in is tomorrow, there is no room for a stuck lock or a missing part. Put the slot in the schedule when the move-out date is set, and treat it like any other trade.

What to do before we arrive

• Make hot turns the exception. If most of your move-ins are same-day, you're running without a buffer, and any slip lands on the new resident. Even a half-day gap between move-out and move-in relieves pressure on the lock step and on every other trade.
• Ask residents to return all keys at move-out inspection and sign a key return form. Even though you will rekey regardless, the form creates a record and sets expectations. It also saves arguments later about what was handed back and when.
• Test with the old key too. It's easy to confirm that the new key works and forget to prove the old one fails. A quick trial at each door is what turns 'we rekeyed' into 'we verified.' Write 'old key tested' on your checklist so it isn't skipped.
• Plan around our schedule. We work every day from 6:30 a.m. to 11:30 p.m., Fridays and Saturdays included. A Monday move-in generally needs the rekey done a day or two ahead, with room for surprises. Tell us the real deadline when you book.

Reaching Fullerton

Fullerton is about 55 miles from our San Bernardino base, roughly 60 minutes in light traffic via I-215 South to SR-60 West through Jurupa Valley, Ontario and Chino. When you call, you get an arrival estimate based on where the technician is and the traffic at that moment.

If you're close to SR-57, tell us which exit or cross street you're nearest. It trims the last mile and keeps the van from circling a block that looks right on the map but isn't.

About Fullerton: Fullerton College opened in 1913 near Chapman Avenue and Lemon Street and is the oldest community college in continuous operation in California.

Planning a rekey in Fullerton?

Call (951) 903-3193 and tell us how many doors you want on the new key and the brand of the locks if you know it. We'll quote the rekey before any work starts.