Tenant Turnover Rekey in Fontana

How this works in Fontana

Interchangeable cores and smart locks change the economics of a turn. A small format interchangeable core, or SFIC, is a cylinder that a control key releases from the lock in seconds, so a technician can drop in a pre-pinned core instead of re-pinning at the door. The upfront hardware cost is higher and someone has to manage the core inventory, but the swap can be as quick as removing one core and seating another. Keypad and smart locks shift the work too: resident codes are cleared with a reset, while the backup keyway still needs rekeying. Neither approach is a cure-all, and a mix of conventional locks and electronics is common. For a small portfolio the swap math rarely works and plain re-pinning stays practical; for a large one, cores can pay for themselves. We'll help you compare options for your portfolio based on how often units turn, what you already own and who will manage the keys.

What we can do on-site

• Setting a rekey-every-turn policy. A written policy beats good intentions. State what gets rekeyed (all exterior cylinders and any unit-controlled locks), when (after make-ready work), who authorizes it (manager or owner) and what gets recorded. We can draft that language with you, and we'll tell you honestly which parts are legal questions for your attorney.
• Keyed-alike sets per unit. Keyed alike within a unit doesn't mean keyed alike across the building. Each unit needs its own change key, or one resident's key opens a neighbor's door. We keep each unit's pinning distinct, label the sets by unit number, and note any shared locks, like a gym or laundry room, that sit on separate keys.
• Batching units on a route day. A standing route day works for properties with regular turnover. Pick a day each week or month, send the vacant-ready units ahead, and we handle them together. When an urgent unit appears between route days, call us and we'll fit it in if the schedule allows, with an honest ETA instead of a promise.
• Key counts, labels and the turnover key log. Every rekey should end with a number: how many keys exist for the unit and who holds each one. We label each set by unit, record the count on the work sheet and give you a copy. Add resident signatures at handoff and your office has a complete chain from cut to hand.
• Standardizing smart locks and keypads across a portfolio. A portfolio with mixed smart lock brands means mixed apps, mixed batteries and mixed reset steps. Standardizing on one model, such as a Schlage Encode or a Yale Assure, turns the code purge into a single repeatable checklist. We install, program and test, and we'll tell you honestly when a model you own is a poor fit for rentals.

Local factors in Fontana

Older rental houses and fourplexes tend to carry decades of mixed hardware, and a turn is the time to see what's really there. We rekey what's healthy, flag what's worn and quote replacements that move the building toward one keyway. In older neighborhoods around Sierra Lakes, painted-over strike plates and warped doors also show up, so we check how each bolt throws before closing out a unit.

Housing near hospitals and clinics often serves traveling nurses and residents on short contracts, which means frequent turns and furnished units. Build the rekey into every turn, since a short stay still leaves copies behind. Staff who work odd shifts may need the new keys at unusual hours, so confirm the handoff plan with them before the unit is ready.

Employers in warehouse districts often lease housing for workers, with units turning when contracts end. Block leases and corporate accounts need a clear authority chain: who may order a rekey, who gets the invoice and who receives keys. Set that up once, in writing, and each turn becomes a short exchange of unit numbers instead of a new negotiation. A short written authority list also helps when your contact at the employer changes.

Common situations

• A model unit is used for self-showings with a keypad deadbolt. Every few weeks the codes pile up from agents, photographers and applicants. At each turn we help the manager clear the codes, check the batteries and rekey the backup cylinder. The unit is then ready for the next resident, and the manager sets codes to expire so the pile doesn't grow back.
• A condo owner who rents a unit in Fontana deals with an HOA that controls the front-gate fob and the mailbox. When the resident leaves, the owner books us for the door lock and emails the association about the fob. The key record shows three separate access items with three separate owners, so nothing falls through the cracks.
• A new management company takes over a small portfolio and inherits a drawer of unlabeled keys. The first priority is a baseline: we rekey the units about to turn and set up a unit-by-unit key sheet. From then on, each turn follows the same pattern, so within a few months the whole portfolio runs on records the company created rather than records it inherited.
• The painters need access on Tuesday, the carpet crew on Wednesday and the new resident arrives Friday. The manager hands the crews a temporary key and books our rekey for Thursday, after the work is done and before the final inspection. The unit is finished in order, the permanent keys are cut last, and nobody holding a contractor's key can walk back in over the weekend.

Step by step with Julian's Locksmith

1. Add the lock step to your turn checklist. Start on your side. Name the step something specific, like lock reset, assign an owner and place it after paint, clean and repairs but before final inspection. Add a field for the date it was done. When the step lives on the checklist, it stops being forgotten during busy weeks.
2. Send the turn list. A good turn list answers six questions per unit: where is it, how many cylinders, what brand, what key system, how do we get in, and when is the deadline. Photos of the hardware help. We'll flag what's missing, and tell you if something on the list may need special parts.
3. Quote and slot the visit. We quote the batch by phone or email from your list, price each unit separately and propose a visit window inside our hours. Nobody is booked until you say yes. If the list changes, we update the quote before any work starts. Schedule the slot for after the last trade finishes.
4. Authorization and access. On arrival we verify who authorized the work: an owner's ID with proof of ownership, or a manager's written authorization. We confirm the unit numbers match the list and that nobody lives in a unit we are about to rekey. If a resident is still in possession, we stop.
5. Rekey, cut and test, unit by unit. Testing isn't optional. Besides trying every key, we check that each bolt throws fully with the door shut, because a rekeyed lock that sticks against the strike earns a maintenance call from the new resident. Small checks like that are why a rekey leaves fewer problems behind.
6. Close out with a key log and an invoice by unit. Close the loop in your own records the same day: update the key log, note the rekey date on the unit file and file the work sheet. If your software tracks work orders, attach our sheet. A clean record at close-out is what makes the next turn quick.

How we quote the job

• Key system: different, alike or master-keyed. If you're considering moving to a master system, restructuring an entire building is a different project from a turn rekey and is priced as one. Don't try to fold it into a single unit turn. We can walk the building, describe what a system would involve and give you an honest sense of scale.
• Key counts and key type. Each key is cut and checked, so the count affects the total. Decide how many keys per resident and how many controlled spares your office keeps. We cut exactly the number you ask for, label the sets and price each key separately, so the quote matches what you hand out.
• Lead time and the vacancy window. Emergencies happen, such as a hot turn where the inspection slipped or a lock found failing the day before move-in. We'll tell you how fast we can honestly get there and what the visit will cost before we drive. Same-day work isn't always possible, and we won't pretend otherwise.

Every job gets a clear quote before any work starts. Call (951) 903-3193 with the details and we'll tell you what to expect for your situation in Fontana.

Common errors that cost time and money

• Cutting too many spares. Extra keys float around offices, trucks and desk drawers. Each one needs tracking, and the more there are, the likelier one goes missing. Set a fixed count per unit and per office. A fixed count and a signed log keep the number honest.
• Skipping the old-key test. A cylinder that was pinned incorrectly can accept both keys, and nobody finds out until a dispute. Testing the old key at every door takes seconds and proves the work was done. Write the result on the work sheet so the proof outlasts your memory.
• Leaving smart-lock codes in place. Rekeying the backup cylinder won't clear the codes in a keypad, so a former resident, cleaner or agent might still have access. Clear every code and reset the master at each turn. A fresh code takes a minute; a forgotten one can linger for years.

Advice before you book

• Record the bitting of each rekey, or ask us to. Knowing the cut codes lets you order keys by code later and avoid hardware store copies. It also helps if you ever need to chart a master system. Store the records apart from the keys, ideally in your management software.
• Photograph the hardware in every unit the first time we visit. Faceplates show brand and model, and the door edge shows backset and bolt style. Those photos let us bring the right parts on later turns and make quotes for new staff or vendors far more accurate.
• Standardize on a single keyway per property whenever you replace hardware. Mixed brands are the main reason turns take longer than expected. Replace the odd lock out during a turn, not in a panic during a repair call, and your key rings will shrink over time.
• Rekey late in the turn, but not last. After painting, drywall repair and deep cleaning, and before the final inspection, is the sweet spot. That order keeps dust and paint out of the cylinders and means the keys you hand over are the final set.

Getting to Fontana

Fontana is about 16 miles from our San Bernardino base, roughly 22 minutes in light traffic via Palm Avenue to I-215 South. When you call, you get an arrival estimate based on where the technician is and the traffic at that moment.

If you're close to Foothill Boulevard, tell us which exit or cross street you're nearest. It trims the last mile and keeps the van from circling a block that looks right on the map but isn't.

About Fontana: Fontana incorporated on June 25, 1952, and its 2024 Census Bureau estimate of 218,455 residents makes it the second-largest city in San Bernardino County.

Planning a rekey in Fontana?

Call (951) 903-3193 and tell us how many doors you want on the new key and the brand of the locks if you know it. We'll quote the rekey before any work starts.