Need a New Key but Not a New Lock in Etiwanda?

What to expect in Etiwanda

It helps to keep a short checklist of what survives a key change. Stays: the lock body, bolt, latch, strike plate, handle or lever, finish, door prep and mounting screws, plus any keypad, touchscreen or Bluetooth electronics on a smart lock. Changes: the key pins inside the cylinder and the key itself. Does not change automatically: keypad codes, app guest access, garage remotes and whatever neighbors or relatives are holding for you, which is why we review those with you at the end of the visit in Etiwanda. The lock's strength also stays the same. Rekeying makes the old key useless but does not turn a weak lock into a strong one, so a budget deadbolt stays a budget deadbolt. If you want better security, we can swap in a higher-grade cylinder or deadbolt, and we'll price that separately so you can see the difference. A rekey is also a good moment to look over the door itself: strike plate screws, hinge screws and bolt throw all get a check before we pack up.

What we can do on-site

• Handlesets and decorative entry hardware. If your handleset's deadbolt and latch use different keys, we can bring them onto one so the front door needs a single key. That is a bonus of changing the key without replacing the lock: you can fix a daily nuisance at the same time as the security problem.
• Cylinder swaps when a rekey won't hold. A cylinder swap also lets you change the keyway. If you want a restricted system such as Schlage Primus or Medeco, where blanks are controlled and copies need authorization, we can fit the cylinder into your existing lock when the body is compatible. Keep the hardware, upgrade the key control.
• Padlocks, cam locks and cabinet locks. A padlock with a good body and a bad history is worth saving. If the shackle and case are solid, we re-pin the cylinder and cut new keys, or swap in a same-model padlock keyed to your gate or shed set. We also check the hasp it hangs on.
• Patio doors, security gates and screen doors. Hookbolt and mortise-style locks on patio and security doors can often be rekeyed in place, though some are riveted into the frame and need replacing. We identify the model first and tell you what's feasible before we begin, so there are no surprises midway through the visit.
• An honest rekey-or-replace check. Sometimes the right answer is neither. A door that has dropped or a misaligned strike plate makes a good lock feel bad, and a few screws and a re-chiseled mortise fix it. We'll tell you if the problem is the door rather than the lock.

What's different about Etiwanda

HOA communities sometimes control exterior hardware: finish, style, even brand. Changing a key without replacing the lock keeps your door within the rules, since nothing visible changes. We rekey entry locks and private gates, leave common-area hardware alone, and suggest you check the architectural guidelines before swapping any visible lock for something new. Nothing about the exterior of your home changes, so there is nothing for the architectural committee to object to.

Storefront doors in Etiwanda shopping centers often use mortise cylinders and Adams Rite deadlatches that can be rekeyed without touching the door. After an employee leaves or a lease changes, a rekey is faster than replacing hardware, and any landlord-required hardware stays in place. We cut keys for current staff and record the keying for your files. Most storefront rekeys finish before opening hours, with no disruption to customers.

Builder-grade locks in newer Etiwanda tracts are fully rekeyable, and a rekey soon after closing is smart, because construction crews and sales staff may have held copies. We re-pin the entry deadbolts and handlesets to a combination only you hold, keeping the finishes the builder installed and sparing you the cost of swapping hardware that works perfectly well. Rekeying a new house is a cheap way to start with a clean key history.

Situations this covers

• After a kitchen remodel, a family wants to be sure the contractor's crew can't come back in. The locks are a mix of sound deadbolts and a sticky back-door knob. We rekey the deadbolts, replace only the knob's cylinder, and leave the rest alone. They pay for what was actually needed, not for a full set of new locks.
• A resident of Etiwanda loses a key ring at the gym. There's no address on it, but the house key is on there, and she doesn't want to replace a handleset she loves. We rekey the deadbolt and latch to a new key, cut three copies, and the lost ring becomes a set of metal charms with no door to open.
• A property owner with a gated side yard discovers the padlock key was cut for a gardener who left long ago. The padlock itself is solid. We re-pin it, cut new keys and check the hasp, so the gate stays shut, the old gardener key is dead metal, and nothing has to be bought new.
• A renter who has just received a protective order asks her landlord for new locks. In certain protective order situations, California requires landlords to change them within 24 hours of a written request (Civil Code sections 1941.5 and 1941.6). The landlord books us, we confirm authority with the landlord, rekey the entry deadbolt, test the lock and hand the new keys to the landlord to give to her.

How the visit works

1. Describe the lock and why the key needs to change. Call (951) 903-3193 and tell us what happened: lost keys, a move, a roommate who left. Describe each lock or send photos of the brand, the latch edge and the keyhole. That tells us whether a rekey is likely, and what to bring to your door.
2. Show that you're allowed to change it. California's Locksmith Act, administered by the Bureau of Security and Investigative Services, is why licensed locksmiths ask these questions. Our license is LCO7891, and you can look it up at search.dca.ca.gov. The check takes a minute and protects you as much as us.
3. Inspect the lock and choose rekey, cylinder swap or replace. We test the lock before touching it: key action, bolt throw, latch retraction, strike alignment. A sound lock gets a rekey. A worn or corroded cylinder gets a swap. A cracked or failing lock gets a replacement quote. You see the options and choose.
4. Remove the cylinder and re-pin it. On a deadbolt, the cylinder comes out through the bolt body; on a knob, through the rose or a release tab. The method differs, the idea doesn't: expose the plug, swap pins, reassemble. We work over a tray so nothing rolls away into the planter bed.
5. Test the new key and the working door. Testing includes the lock's feel. A stiff turn, a gritty plug or a bolt that stops short means something else is wrong, and we fix it or tell you. Smart locks get their backup key tested as well as their keypad.
6. Hand over keys and check what's left. Gather any old keys and pull them off your rings; they no longer turn anything and only cause confusion. We leave you a note of what we changed and which key type to ask for if you need copies later, so any licensed locksmith can match it.

How we quote the job

• Whether you have a working key. A working key makes a rekey faster, because it lets us operate and release the lock smoothly. If you have none, we may need to open, decode or drill the lock first, which adds time and parts. Tell us on the call and we'll plan the visit around it.
• How many new keys and what type. Keys are cut on site, and each one adds a small amount to the job. Most households want three to five. Restricted or six-pin keys need special blanks and cost more, but copies can't be made at a kiosk, which helps if you've had trouble with stray duplicates.
• Timing, travel and add-on work. Travel across Etiwanda is part of the service call, and early-morning or evening visits fit within our Sunday-through-Thursday hours. Friday and Saturday have the same hours as every other day. Bundling every lock into one visit keeps the total down, and booking ahead lets us bring the right parts.

Every job gets a clear quote before any work starts. Call (951) 903-3193 with the details and we'll tell you what to expect for your situation in Etiwanda.

Advice before you book

• Use a puff of graphite or PTFE spray in the keyway once a year, never household oil. Oil traps dust and bakes into gum in a hot, dry climate, while a dry lubricant keeps the new pins moving and the key turning without effort.
• Change every keyed lock in one visit. Front door, back door, garage entry, side gate, shed and patio door all count. The lock you skip keeps the old key alive. Walk the property once with a notepad, then tell us the total when you call.
• Keep the brand and model if you have the box or receipt. A model number lets us check whether parts and cylinders are available, which matters for older or decorative locks. Take a photo of the paperwork and file it with your home records.
• Renting? Ask in writing. Most leases make the landlord responsible for locks, and some forbid changes. Get permission by email or text and keep it. California law sets specific duties for landlords on deadbolts and protective-order lock changes, so the conversation is worth having.

Mistakes to avoid

• Hiring whoever quotes the lowest number on the phone. Teaser quotes tend to grow at the door once the technician says your lock can't be rekeyed. Ask for the company name, the license number and the all-in price. Check the license at search.dca.ca.gov first.
• Rekeying a lock that is already failing. If the bolt is cracked, the plug is corroded or the latch sticks, new pins won't help. You pay for the rekey and then for a replacement. Have the lock inspected first so the money goes into the right fix.
• Leaving old keys mixed in with new ones. After a rekey the old keys no longer work, but they look identical. A family member who grabs the wrong one gets locked out. Remove the dead keys from every ring and mark the new ones with a colored cap.

Getting to Etiwanda

Etiwanda is about 17 miles from our San Bernardino base, roughly 22 minutes in light traffic via University Parkway to SR-210 West through Rialto and Fontana, exit Day Creek Boulevard for the historic core and North Etiwanda. When you call, you get an arrival estimate based on where the technician is and the traffic at that moment.

Traffic matters more than mileage. We check conditions on SR-210 and its connecting routes before quoting you a time, and we don't pretend a long drive through heavy congestion is a short one.

About Etiwanda: The Etiwanda Fire started on April 30, 2014, and burned about 2,200 acres in San Bernardino County before it was contained on May 9.

Planning a rekey in Etiwanda?

Call (951) 903-3193 and tell us how many doors you want on the new key and the brand of the locks if you know it. We'll quote the rekey before any work starts.