2001 Jaguar S-Type Key Replacement

2001 S-Type key specs

Most S-Types carry a four-button flip key (FCC ID NHVWB1U241) with the remote built into the head and a fold-out 6-cut Tibbe blade; the buttons cover lock, unlock, trunk release and lights. Early 2000-2002 cars often have a plain Tibbe transponder key with a separate four-button remote (part XR83-15K601-AA, FCC ID CWTWB1U322) instead, and the two layouts overlap in 2001 and 2002. Both setups use the same 4D60 PATS chip, so a flip key can usually be made for any year. V6, V8 and S-Type R models share the same key.

What's specific to the 2001 S-Type

The 2001 Jaguar S-Type is the second of 9 model years in the S-Type X200 (2000–2008), so it shares its key system with the rest of that run, which makes replacement parts easy to source.

A 2001 Jaguar S-Type is about 25 years old. Original keys are often worn smooth, and some factory remotes for cars this age are discontinued, so we may suggest a quality aftermarket remote or a separate fob. Because older immobilizers are simpler, all-keys-lost jobs on cars this age are usually more straightforward than on late models.

Key options for the 2001 Jaguar S-Type

• Flip (switchblade) key. When a flip key is lost rather than broken, the replacement starts from scratch. For a Jaguar S-Type, we confirm the FCC ID, frequency and chip type from the VIN and any remaining key, cut the blade by code, then program both the transponder for the immobilizer and the remote buttons for the doors. Some platforms accept a new flip key through the OBD-II port in a single session; others need a security PIN or a module read before they'll take a new key. Aftermarket flip keys vary a lot in quality, especially the hinge mechanism, so we'll tell you which options we trust for your 2001 S-Type and which we don't.
• Transponder (chip) key. Transponder chips come in families, such as Texas Instruments 4C and 4D, Philips 46, Megamos 48 and the newer 128-bit AES types, and a Jaguar S-Type only accepts the one its immobilizer was built around. That's why a hardware-store blank that looks right often won't start the car. We match the blank to the vehicle's chip and keyway before cutting. One more practical note: the chip lives in the plastic head, and when that head cracks, the chip can fall out or shift away from the antenna. If the car starts some days and not others, a damaged head is a frequent reason, and replacing the key before it quits entirely costs less than an all-keys-lost visit.
• Key with separate remote fob. Pairing a separate remote to a 2001 Jaguar S-Type is a different job from programming the ignition key. Some vehicles accept new remotes through an on-board sequence of key turns and button presses; others need a scan tool connected to the OBD-II port. On many of them, entering remote programming mode clears every remote the car already knows, so any remote you want to keep has to be present and re-paired during the same session. Before we start, gather every remote that belongs to the vehicle. Leaving one in a kitchen drawer is a classic way to end up with a remote that quits the day after a new one is added.

How the Jaguar immobilizer works on the S-Type

Jaguar keys from 2000 on fall into four families, and knowing which one your car uses explains most of what a key job involves. The XJ8 (through 2003) and XK8 (through 2006) carried over from the late 1990s and use an 8-cut Tibbe key plus a separate four-button remote; on 2000-2003 cars the transponder is a Megamos crypto (ID48) chip. The S-Type, X-Type and 2004-2009 XJ share a Ford-era immobilizer and a 6-cut Tibbe key carrying a Texas Instruments 4D60 chip, usually built into a flip remote. Jaguar's Smart Key arrived with the 2007 XK and 2009 XF, a proximity fob with a Hitag2 (ID46) transponder and push-button start. From the 2011 XJ, and then the XF, F-Type, XE and F-Pace, Jaguar moved to the KOBJTF10A fob it shares with Land Rover, which uses a Hitag Pro (ID49) transponder and an HU101 emergency blade. On smart-key cars the key data lives in a keyless vehicle module (KVM), called the remote function actuator (RFA) on later models, and its software version decides how a key can be added. The E-Pace, I-Pace and the facelifted cars from about 2020 use newer fob families, where aftermarket coverage is thinner.

• S-Type keys carry a Texas Instruments 4D60 chip, part of the Ford PATS system shared with the Lincoln LS.
• Tibbe keys need a clamp and cutter set up for Tibbe blanks; the edge-cut machines found at most hardware stores cannot duplicate them.
• Supplier tables list the flip key for S-Types from 2000 or 2001 onward, so an early car may have either layout.

Programming a 2001 S-Type key

The S-Type uses the Ford PATS immobilizer, so keys are programmed with a scan tool through the OBD-II port, and some procedures include a timed security wait before the car accepts new keys. An all-keys-lost session normally clears the old keys from memory, so a key that turns up later will not start the car until it is reprogrammed. Remotes are paired separately, and cars with a separate remote need that step even when the ignition key already works.

Lost every key to your S-Type?

1. Gather your documents and the VIN. Find your registration or title and a government photo ID in the same name. Note the VIN, which is printed on the driver's side of the dashboard and usually on your insurance card. If the paperwork is locked in the car, tell us; we'll open the vehicle first and check it there.
2. Get into the vehicle without damage. Entry comes before key-making because we need access to the ignition, the OBD-II port and sometimes the documents in the glove box. We take care with weather stripping, door frames and paint, and we confirm the dash VIN matches your registration before going any further.
3. Originate a new key from the car. Originating a key means building it without a sample. The door lock usually reveals most of the cuts; any it doesn't are worked out by test-cutting and trying the ignition or a second lock. The finished blade should feel like a factory key, not a forced fit.
4. Program the key to the immobilizer. Next, the new key is introduced to the car's security system. Many vehicles allow this through the OBD-II port with a PIN or security procedure. Some all-keys-lost cases require reading a module on the bench, and a few platforms only allow dealer programming, which we'll tell you up front.
5. Erase missing keys and add a spare. A lost key's metal blade can still open your doors even after its chip is erased. If the keys disappeared along with something showing where you live or park, consider rekeying the car's door lock cylinders too. We'll also recommend leaving with two working keys, not one.

Why a spare key pays for itself

• Two drivers sharing one key is a daily negotiation. A second key lets a partner, teenager or coworker use the vehicle without handing keys back and forth in parking lots, and it means one person losing their key ring doesn't leave the whole household stuck.
• A spare turns a future all-keys-lost emergency into a simple add-a-key job. With one working key in hand, programming is quicker, and the chip or fob can often be paired without decoding locks or reading modules, which keeps the cost of a lost key far lower.
• A spare stored safely at home rescues you from a locked car with the fob sitting on the seat, a key dropped somewhere along a hiking trail, or a fob that stops responding on a busy morning. Keep it indoors, never in a magnetic box under the bumper.

Dealer or mobile locksmith?

The biggest difference between a dealership and a mobile locksmith is where the work happens. A dealer programs keys in its service bay, so if every key is lost, the car usually has to be towed there, and you work around the service department's schedule and the time it takes to order a key by VIN. Julian's Locksmith brings the cutting machine, key blanks and programming equipment to the car, whether it sits in your driveway, a workplace lot or a parking structure. For a 2001 Jaguar S-Type we can program on-site, that means no tow and no shuttle rides back and forth. The trade-off is real, though: on vehicles where only the dealer can program keys, a tow or appointment may still be necessary, and we'll say so before you spend anything on our visit.

S-Type key battery

A fob battery rarely dies all at once. The warning signs build: you have to get closer to the car before the doors respond, the dash shows a key battery or key-not-detected message, or the push-button start only works with the fob held near the button. Inland heat speeds that decline, especially for fobs left in a hot cabin or on the dashboard. Keep a spare replacement at home in a cool drawer, sealed in its original package, and buy from a busy store where stock turns over quickly. A cell that sat on a shelf for years may arrive already partly spent.

How the job works

1. Identify the exact key your S-Type uses. We ask a few quick questions on the phone: the year, whether the car starts with a turn key or a button, how many keys you have left, and whether the remote still works the doors. Then we check the VIN against our programming references so the van arrives with the correct blank or fob, not a close guess.
2. Verify ownership before any work. Before cutting or programming, we compare your government photo ID with the vehicle registration or title and check that the VIN on the paperwork matches the VIN on the dash. If the registration is locked inside, we open the car first, confirm the documents, and only then make the key.
3. Get the key code or decode the lock. A key is cut from a code, not a guess. When the factory code can be retrieved through manufacturer channels after ownership is verified, we use it. When it can't, we decode a door lock with a pick-decoder tool that reads the wafer positions without damaging anything, then work out any missing cuts.
4. Cut the blade on-site. Cutting happens right beside your car. For a smart key, that means the emergency blade hidden inside the fob; for a transponder or remote-head key, it's the main blade you'll use every day. We deburr the cuts and check the fit in each lock so nothing binds or sticks later on.
5. Program the chip, remote or smart key. Programming tells the car's computers that the new key belongs to the vehicle. Transponder chips are added to the immobilizer, remote buttons to the body control module, and proximity fobs to the keyless system. If a step requires dealer-only access on your S-Type, you'll have heard that before we arrived, not halfway through the job.
6. Test everything and clear out old keys. The last step is a short walkthrough. We show you how many keys the car now recognizes, point out the dead-fob start method for your vehicle, and hand you an itemized receipt. If a spare makes sense, it's simplest to add it during this same visit while the equipment is already connected.

What affects the price of an S-Type key

• The type of key. The biggest factor is technology. A plain mechanical key is a cutting job only. A transponder key adds a chip and programming. Remote-head and flip keys add a circuit board, and a proximity fob for a push-button Jaguar S-Type is the most involved of all, both in the part itself and in the programming.
• Factory or aftermarket parts. Some owners want an exact factory match; others just want a dependable key that starts the car. Both are reasonable choices. The part you pick changes the quote, so we lay out the options side by side, with the trade-offs in fit, button feel and long-term durability, before you decide.
• All keys lost or adding a key. Adding a key while a working one is in hand is the simpler job. With every key gone, we may have to open the car, decode a lock to originate the cuts, and run a longer programming routine, so all-keys-lost work takes more time and costs more.
• Blade style and cutting. The blade still matters on keyless cars, because the emergency insert has to fit the door lock. Cutting by code is standard for us. Decoding a door lock when no key or code exists adds time, and so does progressing any cuts the door lock doesn't show.

Call (951) 903-3193 with your VIN and the keys you still have, and we'll quote the job before any work starts.

Common Jaguar key problems

• Proximity-key Jaguars, like other keyless cars, are exposed to relay attacks that stretch the fob's signal from inside your house to the car. A signal-blocking pouch and an OBD-II port lock are sensible, inexpensive precautions.
• Bargain aftermarket smart keys sometimes pair for lock and unlock yet fail the start or proximity functions. Matching the original part number and testing every function after programming avoids a second trip.
• Used or online-bought Jaguar smart keys are usually locked to the car they came from, and some can be reused only after an unlock or re-flash service. Check with us before buying a secondhand fob that only looks right.

Tips from a mobile locksmith

• On any vehicle with a turn-key ignition, keep the key ring light. A heavy cluster of keys, tools and charms swings with every bump and slowly wears the ignition wafers and the key itself. When the key starts to stick or needs a wiggle to turn, deal with it early, before it stops turning entirely.
• Make the spare before you need it. Adding a key while one still works is quicker and less expensive than starting from nothing, and it keeps the simpler programming options available. Good moments are right after buying the car, or as soon as one of your two keys goes missing.
• Never hide a spare key or fob on the outside of the car. Magnetic boxes in wheel wells and under bumpers are the first places a thief checks, and with a proximity fob, a hidden key can let anyone open the doors and drive away. Keep the spare at home or with someone you trust.

Proof of ownership

Making car keys is regulated work in California. Locksmiths are licensed and overseen by the Bureau of Security and Investigative Services under the Locksmith Act, Business and Professions Code section 6980 and following, and Julian's Locksmith holds company license LCO7891. Verification protects you more than anyone: a locksmith who will make a key for whoever asks will also make one for someone who wants your car. We record your name, the vehicle and its VIN on a work order, and we politely decline jobs where ownership can't be established. You can look up our license at search.dca.ca.gov.

Need a 2001 Jaguar S-Type key?

The quickest route to a working key for a 2001 Jaguar S-Type starts with a short phone call. Dial (951) 903-3193, share the VIN and where the car is parked in Southern California, and we'll tell you whether it's an on-site job, a dealer job, or a mix of both. No pressure and no surprise charges, just a straight plan.