2019 Jaguar I-Pace Key Replacement

2019 I-Pace key specs

Launch-era I-Pace models use a proximity smart key with a mechanical emergency blade inside; with the fob in the cabin, you press the brake and the start button to ready the car. Supplier listings show JLR's KOBJXF18A fob family on the I-Pace. The S, SE, HSE and First Edition trims all use the same type of fob. Jaguar also offered a wristband Activity Key in some markets, and if your car has one, mention it, because it is a separate device. Spare fobs should be ordered by VIN, since the part number matters more than the look.

What's specific to the 2019 I-Pace

2019 was the first model year of the I-Pace X590 (launch models). Early-production cars sometimes use different part numbers than later ones, so for a 2019 Jaguar I-Pace we confirm the exact key from the VIN or the old key's FCC ID before cutting anything.

A 2019 Jaguar I-Pace is about 7 years old now. Original fob batteries are near the end of their life at this age, so weak range or a "key not detected" message is often a battery before it is a failed fob. Cars this age are often on their second owner, which is when a single remaining key and a request for a spare tend to show up.

Key options for the 2019 Jaguar I-Pace

• Smart proximity key (push-to-start). Making a new smart key is mostly a programming job. The fob has to match the vehicle's FCC ID, frequency and chip, and then the keyless system must be told to accept it, normally through the OBD-II port. Depending on the platform, that can mean entering a PIN, waiting through a timed security procedure, or on some newer vehicles, using manufacturer online access. When every key is lost, certain models need a module removed and read on the bench. For your Jaguar I-Pace X590 (launch models), we'll tell you which of those applies, and if a step is dealer-only, you'll hear it before we drive out. The emergency blade hidden inside the fob is cut by code during the same visit.

How the Jaguar immobilizer works on the I-Pace

Jaguar keys from 2000 on fall into four families, and knowing which one your car uses explains most of what a key job involves. The XJ8 (through 2003) and XK8 (through 2006) carried over from the late 1990s and use an 8-cut Tibbe key plus a separate four-button remote; on 2000-2003 cars the transponder is a Megamos crypto (ID48) chip. The S-Type, X-Type and 2004-2009 XJ share a Ford-era immobilizer and a 6-cut Tibbe key carrying a Texas Instruments 4D60 chip, usually built into a flip remote. Jaguar's Smart Key arrived with the 2007 XK and 2009 XF, a proximity fob with a Hitag2 (ID46) transponder and push-button start. From the 2011 XJ, and then the XF, F-Type, XE and F-Pace, Jaguar moved to the KOBJTF10A fob it shares with Land Rover, which uses a Hitag Pro (ID49) transponder and an HU101 emergency blade. On smart-key cars the key data lives in a keyless vehicle module (KVM), called the remote function actuator (RFA) on later models, and its software version decides how a key can be added. The E-Pace, I-Pace and the facelifted cars from about 2020 use newer fob families, where aftermarket coverage is thinner.

• Twin electric motors make every I-Pace all-wheel drive, so a flatbed is the safe way to move one to a dealer.
• The I-Pace has a conventional 12-volt battery alongside the traction pack, and a weak one can cause keyless faults.
• The fob contains a mechanical emergency blade for getting in when the fob or 12-volt battery is dead.

Getting a 2019 I-Pace key from the dealer

Fob programming on the I-Pace is normally done on Jaguar's dealer diagnostic system, and we are not aware of dependable aftermarket coverage for adding or originating I-Pace keys. That makes a Jaguar dealer the place for a new fob. We can still help by opening the car if the fob is locked inside or dead, and by helping you prepare for the dealer visit with your VIN and proof of ownership ready.

New I-Pace fobs are programmed by a Jaguar dealer; we can help with lockouts and preparing for the dealer visit.

How we help when the key must come from Jaguar

Losing every key to a Jaguar can be recoverable, but the route depends on the year. For the Ford-era S-Type and X-Type we cut a Tibbe key to the lock and program it through OBD-II, usually the simplest case, though the result still depends on the car's module and our tool coverage. The 2000-2006 XJ8 and XK8 and the 2004-2009 XJ can be done with the right early-Jaguar coverage, though an aging security module sometimes has to come out for a bench read. Smart-key cars from 2007 through about 2020 vary by module version; some years are covered over OBD-II and others need the module removed, which takes longer than adding a spare. For the E-Pace, the I-Pace and the facelifted cars from about 2020 on, the dealer is often the realistic answer, and we say so up front. We verify your ID and proof of ownership before making any key.

1. Get you back into the car. If the car is locked, we open it on site without damage, so you can reach the registration, the VIN plate and anything you need inside.
2. Line up the dealer order. We help you gather what the Jaguar dealer will ask for: the VIN, current registration or title, and photo ID in the owner's name. That avoids a second trip.
3. Keep the car where it is if possible. Ask the dealer whether the key can be programmed with the car in place or whether it needs to be towed in. Some brands deliver a pre-coded key; others must program it at the vehicle.
4. Plan for a spare. Once you have a working key, order a second one. Losing the only key on a dealer-only system is the slowest and most expensive situation to recover from.

Why the 2019 I-Pace needs a dealer key

On the 2019 I-Pace, the immobilizer and the keyless system trust only keys that Jaguar's own system has authorized for that VIN. Programming happens through a secure online connection, and the key itself is usually ordered with the car's security data already written to it. Independent locksmith equipment is very capable on most vehicles, but on dealer-only generations like this one the honest answer is that the factory has to be involved. Being upfront about that saves you the cost of a wasted service call.

What to bring to the dealer

Bring the vehicle registration or title in your name, a matching government photo ID, and the VIN (on the lower driver's side of the windshield and on the door-jamb label). If the car is financed or leased, the dealer may also ask for the lender's paperwork, so call ahead and ask exactly what they need. If any key still works, bring it; adding a key is usually faster than replacing every key.

While you wait for the new key

Waiting on a factory key can take anywhere from the same day to a week or more, depending on stock. In the meantime, avoid buying a used key online; on dealer-only systems a used key almost never programs to a different car. If you're locked out of the car or need something from inside it, call us; that part is quick and doesn't depend on the dealer.

What affects the dealer's price for an I-Pace key

Expect the dealer's quote to include the key itself, a programming or setup charge, and sometimes a separate charge for cutting an emergency blade. If every key is lost, add the cost of getting the car to the dealership. Comparing two dealers is worth a phone call; programming charges vary more than the price of the key.

Avoid doing this twice

Once you have a working key for your 2019 I-Pace, order a second one while the car's information is already on file. On dealer-only systems, adding a key while one still works is simpler, faster and cheaper than replacing every key after a loss. Keep the spare somewhere you can reach quickly, not in the car, and note where you stored it.

I-Pace key battery

If a new replacement doesn't bring the fob back, the battery wasn't the problem. Common culprits include a battery holder whose solder joints have cracked from drops, contacts corroded by moisture, worn rubber button pads that no longer reach the circuit, or a board damaged by water. We can test whether the fob is transmitting at all and inspect the board closely. Sometimes a new shell or a resoldered holder solves it; sometimes the fob has to be replaced and programmed. Meanwhile, the car can usually still be started with the fob held at the backup spot described in the owner's manual.

Common Jaguar key problems

• Low 12-volt battery voltage produces odd immobilizer and keyless-entry faults and can abort key programming partway through. Several Jaguars mount the battery in the trunk, which makes a dead battery and a locked car a trickier combination.
• Flip-key hinges on the S-Type, X-Type and 2004-2009 XJ wear out, leaving a blade that flops or won't lock open. The 4D60 chip and circuit board usually survive, so a new shell and blade can save the original remote.
• Bargain aftermarket smart keys sometimes pair for lock and unlock yet fail the start or proximity functions. Matching the original part number and testing every function after programming avoids a second trip.
• Proximity-key Jaguars, like other keyless cars, are exposed to relay attacks that stretch the fob's signal from inside your house to the car. A signal-blocking pouch and an OBD-II port lock are sensible, inexpensive precautions.
• Tibbe keys on 2000s Jaguars wear along with the ignition and door locks. A key cut to factory code, rather than copied from a worn original, usually works far better in a tired ignition cylinder.

Tips from a mobile locksmith

• If your vehicle has a proximity key, think about where it sleeps at night. A fob hanging by the front door can sit within range of relay equipment used to open and start cars from outside. A drawer deeper inside the house, a signal-blocking pouch, or the fob's own sleep mode reduces that risk considerably.
• On any vehicle with a turn-key ignition, keep the key ring light. A heavy cluster of keys, tools and charms swings with every bump and slowly wears the ignition wafers and the key itself. When the key starts to stick or needs a wiggle to turn, deal with it early, before it stops turning entirely.
• Photograph the back of your fob and any key tag that came with the car. The FCC ID, part number and key code printed there make ordering a replacement faster and more accurate. Store the photos somewhere you can reach from any device, not only on the phone that might go missing along with the keys.

Proof of ownership

Before we cut or program a key for any vehicle, we verify that you have the right to it. Please have two things ready: the current registration or the title, and a government-issued photo ID with a matching name. We also check that the VIN on those documents matches the VIN plate on the dashboard. If the registration is locked inside the car, that's fine; we open the vehicle first, check the paperwork in the glove box, and only then make the key. If something doesn't line up, we stop and sort it out before any key is made.

Need a 2019 Jaguar I-Pace key?

Call Julian's Locksmith at (951) 903-3193 if you're locked out of a 2019 Jaguar I-Pace or need help preparing a dealer key order. We'll tell you plainly what we can do on site and what has to go through Jaguar.