2004 Acura NSX Key Replacement

2004 NSX key specs

The 2000-2005 NSX uses a conventional chip key with a Megamos 13 transponder in its head, sharing its blade and chip family with the TL, CL and RL of the period. That keeps blanks available even though the car itself is rare. Many of these cars have spent long stretches in storage, so a worn or brittle original key is common, and cutting a new key to the code gives a cleaner result than copying the old one.

What's specific to the 2004 NSX

The 2004 Acura NSX is the fifth of 6 model years in the NSX First generation (NA1/NA2) (2000–2005), so it shares its key system with the rest of that run, which makes replacement parts easy to source. A 2004 Acura NSX is about 22 years old. Original keys are often worn smooth, and some factory remotes for cars this age are discontinued, so we may suggest a quality aftermarket remote or a separate fob. Because older immobilizers are simpler, all-keys-lost jobs on cars this age are usually more straightforward than on late models.

If a newly cut key turns the 2004 NSX's ignition but the engine cranks and dies, the transponder isn't recognized yet; that's a programming step, not a cutting problem, and it's handled at the car.

Key options for the 2004 Acura NSX

• Transponder (chip) key. Transponder chips come in families, such as Texas Instruments 4C and 4D, Philips 46, Megamos 48 and the newer 128-bit AES types, and an Acura NSX only accepts the one its immobilizer was built around. That's why a hardware-store blank that looks right often won't start the car. We match the blank to the vehicle's chip and keyway before cutting. One more practical note: the chip lives in the plastic head, and when that head cracks, the chip can fall out or shift away from the antenna. If the car starts some days and not others, a damaged head is a frequent reason, and replacing the key before it quits entirely costs less than an all-keys-lost visit.

How the Acura immobilizer works on the NSX

Acura fitted an immobilizer to essentially every car it sold here from 2000 on, and the type of chip tells you a lot about how a replacement key gets made. Through the early 2000s, the TL, CL, RL, MDX, RSX, NSX and 2000-2001 Integra used a Megamos 13 fixed-code transponder inside a conventional key, with keyless entry handled by a separate remote. The 2004 TL and TSX introduced Philips ID46 (Hitag 2) crypto chips, which later moved into flip keys on the MDX, RDX, TL and TSX. The 2005 RL brought Acura's Keyless Access smart key, and by the late 2010s nearly every Acura used push-button start with a Philips ID47 (Hitag 3) smart fob. The newest designs, such as the 2022-and-later MDX and RDX, the 2023 Integra and the ADX, use Honda's latest smart key generation, while the electric 2024 ZDX uses a GM-designed system. In every case the engine computer checks the chip before it lets the engine run, so a key that is only cut will turn the ignition without starting the car. A flashing key symbol on the dash usually means the car didn't recognize the chip.

• Parts catalogs list the same Ilco HD106 transponder blank for the NSX that they list for the TL, MDX and RSX of the era.
• The 2002 facelift replaced the pop-up headlights with fixed units, but catalogs still list a single HD106 key blank for the NSX from 1997 through 2005.
• Megamos 13 is a fixed-code chip, so a working key can serve as the source for a cloned spare.

Programming a 2004 NSX key

A spare for a fixed-code Megamos 13 key can often be cloned from a working original without connecting to the car. Originating a key with none left means programming the immobilizer through the diagnostic port, and on a low-volume car like the NSX we confirm that our programmer supports your exact year before starting. If it doesn't, we can cut the key and coordinate programming with an Acura dealer.

Cloning a spare from a working key is usually simple; with every key lost we confirm tool coverage for your exact year first, and some cases go to an Acura dealer.

Lost every key to your NSX?

1. Gather your documents and the VIN. Call with the year, make, model and VIN if you can read it through the windshield, plus where the car is parked. Those details let us confirm whether your Acura NSX can be done on-site and bring the right key, so the first trip is the only trip.
2. Get into the vehicle without damage. Entry comes before key-making because we need access to the ignition, the OBD-II port and sometimes the documents in the glove box. We take care with weather stripping, door frames and paint, and we confirm the dash VIN matches your registration before going any further.
3. Originate a new key from the car. With no key to copy, the cuts come from the vehicle itself. We retrieve the key code through manufacturer channels where possible, or decode a door lock with a pick-decoder tool. Then we cut the blade on our code machine and confirm it turns the lock smoothly.
4. Program the key to the immobilizer. Next, the new key is introduced to the car's security system. Many vehicles allow this through the OBD-II port with a PIN or security procedure. Some all-keys-lost cases require reading a module on the bench, and a few platforms only allow dealer programming, which we'll tell you up front.
5. Erase missing keys and add a spare. Once the car starts, we remove the lost keys from memory wherever the system allows, so they can't start the engine if someone finds them. Making a second key during the same visit costs much less than a repeat all-keys-lost call down the road.

Why a spare key pays for itself

• A spare stored safely at home rescues you from a locked car with the fob sitting on the seat, a key dropped somewhere along a hiking trail, or a fob that stops responding on a busy morning. Keep it indoors, never in a magnetic box under the bumper.
• Some vehicles make it hard to add a key once you're down to one. Certain immobilizer systems let an owner program an extra key on-board only when two working keys are present, so a second key preserves the easy options for later and avoids a full reset.
• Two drivers sharing one key is a daily negotiation. A second key lets a partner, teenager or coworker use the vehicle without handing keys back and forth in parking lots, and it means one person losing their key ring doesn't leave the whole household stuck.

Dealer or mobile locksmith?

The biggest difference between a dealership and a mobile locksmith is where the work happens. A dealer programs keys in its service bay, so if every key is lost, the car usually has to be towed there, and you work around the service department's schedule and the time it takes to order a key by VIN. Julian's Locksmith brings the cutting machine, key blanks and programming equipment to the car, whether it sits in your driveway, a workplace lot or a parking structure. For a 2004 Acura NSX we can program on-site, that means no tow and no shuttle rides back and forth. The trade-off is real, though: on vehicles where only the dealer can program keys, a tow or appointment may still be necessary, and we'll say so before you spend anything on our visit.

How the job works

1. Identify the exact key your NSX uses. We ask a few quick questions on the phone: the year, whether the car starts with a turn key or a button, how many keys you have left, and whether the remote still works the doors. Then we check the VIN against our programming references so the van arrives with the correct blank or fob, not a close guess.
2. Verify ownership before any work. California holds licensed locksmiths responsible for knowing whose car they're making keys for. We record your name, the VIN and the plate on a work order. If you aren't the registered owner, you'll need the owner's written authorization along with your own photo ID before we begin.
3. Get the key code or decode the lock. A key is cut from a code, not a guess. When the factory code can be retrieved through manufacturer channels after ownership is verified, we use it. When it can't, we decode a door lock with a pick-decoder tool that reads the wafer positions without damaging anything, then work out any missing cuts.
4. Cut the blade on-site. Our van carries a code-cutting machine that handles both traditional edge-cut blades and the laser-cut, side-milled profiles common on newer keys. The blade is cut to the code, then test-fitted in a door lock and the ignition or emergency keyhole to confirm smooth operation before any programming begins.
5. Program the chip, remote or smart key. With the blade done, we connect to the OBD-II port and register the new key with the immobilizer. Depending on the Acura system, this may involve a security PIN, a timed waiting period, or on-board button sequences for the remote. On some vehicles we clone a working key's chip instead, when that's the more reliable path.
6. Test everything and clear out old keys. Before we leave, every function gets checked: doors, trunk or liftgate, panic button, remote range, engine start, and the emergency blade in the driver's door. If keys are missing, we delete them from the car's memory where the system allows, so a lost key can no longer start the engine.

What affects the price of an NSX key

• The type of key. The biggest factor is technology. A plain mechanical key is a cutting job only. A transponder key adds a chip and programming. Remote-head and flip keys add a circuit board, and a proximity fob for a push-button Acura NSX is the most involved of all, both in the part itself and in the programming.
• Programming complexity and security access. Some immobilizers accept a new key with a few on-board steps. Others need a PIN code, a timed security wait, manufacturer online access, or removing a module to read its data. Every extra layer of security on the Acura system adds equipment time and labor to the job.
• Blade style and cutting. The blade still matters on keyless cars, because the emergency insert has to fit the door lock. Cutting by code is standard for us. Decoding a door lock when no key or code exists adds time, and so does progressing any cuts the door lock doesn't show.
• Travel, timing and extra repairs. Sometimes a key problem is really a lock problem: an ignition that won't turn even with the right key, or a door cylinder that has been jammed for years. Fixing those is separate work. We point them out, explain the options, and quote the whole job up front so the bill holds no surprises.

Call (951) 903-3193 with your VIN and the keys you still have, and we'll quote the job before any work starts.

Common Acura key problems

• Seized driver's door lock cylinders on smart key cars. The emergency blade almost never gets used, so the cylinder can corrode and refuse to turn the day the fob dies. Try your blade in the door lock every few months.
• Four-button spares on remote-start cars. Some 2014 and later Acuras shipped with a five-button fob that includes remote engine start. A four-button replacement will drive the car but won't start it remotely, so count your buttons before ordering.
• Broken flip-key hinges on 2007-2013 MDX and RDX keys and 2009-2014 TL and TSX keys. The blade stops locking open or flops loose. A new shell can often reuse the original board and chip, but a cracked board means a new programmed key.

Tips from a mobile locksmith

• Photograph the back of your fob and any key tag that came with the car. The FCC ID, part number and key code printed there make ordering a replacement faster and more accurate. Store the photos somewhere you can reach from any device, not only on the phone that might go missing along with the keys.
• Every so often, use the mechanical blade in the driver's door lock. Cylinders that go years without a key can seize from dust and dried grease, and you won't find out until the day the fob dies and the blade is your only way in. A small shot of dry lubricant keeps the lock ready.
• When a key's head cracks or its blade bends, replace it before it fails. A transponder chip can slip out of a split head, and a bent blade can break off inside the ignition or door lock, turning a simple key replacement into an extraction and repair job. Small symptoms are the inexpensive time to act.

Proof of ownership

Not every situation fits the simple case, so here's how we handle the common exceptions. For a leased or financed vehicle, a registration that lists you as the registered owner or lessee works with your ID. If you just bought the car, bring the signed title or bill of sale along with your ID. For a company or fleet vehicle, we need written authorization from the business plus the driver's ID. If the car belongs to a family member, the registered owner should be present or provide signed permission and a copy of their ID. Rental vehicles go through the rental company.

Need a 2004 Acura NSX key?

Don't wait until the last key disappears. If your Acura NSX is down to one key, or the one you have is falling apart, call (951) 903-3193. We're a licensed California locksmith, license LCO7891, serving Southern California and the rest of the Inland Empire with mobile car key service every day from 6:30 a.m. to 11:30 p.m.