Acura ILX Key Replacement

ILX keys by generation

From the 2016 refresh on, every ILX uses a push-button smart key. Four-button fobs (lock, unlock, trunk and panic) carry FCC ID KR5V1X on earlier cars and KR5V2X on 2019 and later models, and five-button remote-start versions also exist. Some fobs are non-memory parts while others come as Driver 1 and Driver 2 versions, so the part number on your old fob matters. Each fob hides a mechanical emergency blade. Refreshed ILX smart keys are registered through the OBD-II port with a key programmer that handles Honda's Hitag 3 smart system. Adding a spare and building a new key when every one is gone are both routine on this platform, and the remote functions program in the same session as the immobilizer. We cut the emergency blade to match your door lock so the spare still gets you inside with a dead battery.

Keyless Access with push-button start was standard on the early ILX, including the 2013-2014 Hybrid. The four-button smart key (lock, unlock, trunk and panic) carries FCC ID KR5434760 and comes in Driver 1 and Driver 2 versions, part numbers 72147-TX6-A01 and 72147-TX6-A11. A mechanical emergency blade slides out of the fob for the driver's door. The same FCC ID appears on the 2013-2015 RDX fob, but that one has a hatch button instead of a trunk button. Early ILX smart keys are registered through the OBD-II port with a key programmer that supports Honda's smart key system, and the transponder and remote functions program together. Adding a spare and replacing every lost key are both routine on this car. Honda's registration can drop keys that aren't present, so bring every fob you still use, and we'll cut the emergency blade to your door lock.

Acura key security

Acura fitted an immobilizer to essentially every car it sold here from 2000 on, and the type of chip tells you a lot about how a replacement key gets made. Through the early 2000s, the TL, CL, RL, MDX, RSX, NSX and 2000-2001 Integra used a Megamos 13 fixed-code transponder inside a conventional key, with keyless entry handled by a separate remote. The 2004 TL and TSX introduced Philips ID46 (Hitag 2) crypto chips, which later moved into flip keys on the MDX, RDX, TL and TSX. The 2005 RL brought Acura's Keyless Access smart key, and by the late 2010s nearly every Acura used push-button start with a Philips ID47 (Hitag 3) smart fob. The newest designs, such as the 2022-and-later MDX and RDX, the 2023 Integra and the ADX, use Honda's latest smart key generation, while the electric 2024 ZDX uses a GM-designed system. In every case the engine computer checks the chip before it lets the engine run, so a key that is only cut will turn the ignition without starting the car. A flashing key symbol on the dash usually means the car didn't recognize the chip.

Most Acura key programming happens through the OBD-II port under the dash with a professional key programmer. There's no owner-side procedure for the immobilizer chip, although the separate keyless entry remotes used from about 2000 to 2008 can usually be paired on board with Honda's timed ignition-and-lock-button routine. Flip keys and smart keys get their remote functions registered along with the chip. Two habits save trouble. First, bring every key you still use, because Honda's registration routine can drop keys that aren't present. Second, check the FCC ID and part number on your current fob, since Acura fobs run on several frequencies (308, 312, 314, 315 and 434 MHz) and many come in Driver 1 and Driver 2 versions tied to seat memory. Laser-cut blades are cut to code on a dedicated machine. We verify your ID and proof of ownership before any key is made.

All ILX keys lost

Losing every key to an Acura is usually fixable where the car sits, but the path depends on the year. For cars with Megamos 13 or ID46 chips, roughly 2000 to 2013 including the flip-key models, we cut a key to your locks by code or by decoding a lock, then program it to the immobilizer through the OBD-II port. Most push-button models from about 2009 to 2020 follow the same pattern with a new smart fob, though low-volume cars like the RL, RLX and first ZDX can take extra steps. The newest platforms, such as the 2022-and-later MDX and RDX, the current Integra, the ADX and the 2021-2025 TLX, depend on current tool coverage, while the hybrid NSX and electric ZDX are dealer jobs. Before anything is cut, we check your photo ID against the registration or title.

1. Gather your documents and the VIN. Find your registration or title and a government photo ID in the same name. Note the VIN, which is printed on the driver's side of the dashboard and usually on your insurance card. If the paperwork is locked in the car, tell us; we'll open the vehicle first and check it there.
2. Get into the vehicle without damage. Entry comes before key-making because we need access to the ignition, the OBD-II port and sometimes the documents in the glove box. We take care with weather stripping, door frames and paint, and we confirm the dash VIN matches your registration before going any further.
3. Originate a new key from the car. Originating a key means building it without a sample. The door lock usually reveals most of the cuts; any it doesn't are worked out by test-cutting and trying the ignition or a second lock. The finished blade should feel like a factory key, not a forced fit.
4. Program the key to the immobilizer. All-keys-lost programming often takes longer than adding a key, because the car has no trusted key to authorize the change. We follow the procedure your Acura ILX requires, then confirm the engine starts and keeps running and the remote or keyless functions respond.
5. Erase missing keys and add a spare. A lost key's metal blade can still open your doors even after its chip is erased. If the keys disappeared along with something showing where you live or park, consider rekeying the car's door lock cylinders too. We'll also recommend leaving with two working keys, not one.

Dealer or mobile locksmith?

Price and parts are the other half of the comparison. Dealers typically sell factory keys only and charge their posted service rates for programming. We offer factory keys where it matters and quality aftermarket alternatives where they perform well, and the quote covers cutting, programming and the trip, with nothing tacked on at the end. Timing differs too. Dealer service departments generally keep business hours, while we take automotive calls every day from 6:30 a.m. to 11:30 p.m., which covers early commutes and late evenings. We're closed overnight, and we'll be upfront if your timing means the dealer or a next-day visit is the better plan. Neither option is wrong; the right one depends on your ILX and your schedule.

How the job works

1. Identify the exact key your ILX uses. We ask a few quick questions on the phone: the year, whether the car starts with a turn key or a button, how many keys you have left, and whether the remote still works the doors. Then we check the VIN against our programming references so the van arrives with the correct blank or fob, not a close guess.
2. Verify ownership before any work. California holds licensed locksmiths responsible for knowing whose car they're making keys for. We record your name, the VIN and the plate on a work order. If you aren't the registered owner, you'll need the owner's written authorization along with your own photo ID before we begin.
3. Get the key code or decode the lock. A key is cut from a code, not a guess. When the factory code can be retrieved through manufacturer channels after ownership is verified, we use it. When it can't, we decode a door lock with a pick-decoder tool that reads the wafer positions without damaging anything, then work out any missing cuts.
4. Cut the blade on-site. Cutting happens right beside your car. For a smart key, that means the emergency blade hidden inside the fob; for a transponder or remote-head key, it's the main blade you'll use every day. We deburr the cuts and check the fit in each lock so nothing binds or sticks later on.
5. Program the chip, remote or smart key. Programming tells the car's computers that the new key belongs to the vehicle. Transponder chips are added to the immobilizer, remote buttons to the body control module, and proximity fobs to the keyless system. If a step requires dealer-only access on your ILX, you'll have heard that before we arrived, not halfway through the job.
6. Test everything and clear out old keys. The last step is a short walkthrough. We show you how many keys the car now recognizes, point out the dead-fob start method for your vehicle, and hand you an itemized receipt. If a spare makes sense, it's simplest to add it during this same visit while the equipment is already connected.

What affects the price of an ILX key

• The type of key. The biggest factor is technology. A plain mechanical key is a cutting job only. A transponder key adds a chip and programming. Remote-head and flip keys add a circuit board, and a proximity fob for a push-button Acura ILX is the most involved of all, both in the part itself and in the programming.
• Factory or aftermarket parts. Factory keys and fobs carry the manufacturer's part number and usually the highest parts cost. Quality aftermarket keys use compatible electronics at a lower price and work well on many vehicles. We tell you which options we trust for your car, and where an aftermarket version has known range or fit issues, we steer you to OEM.
• All keys lost or adding a key. Adding a key while a working one is in hand is the simpler job. With every key gone, we may have to open the car, decode a lock to originate the cuts, and run a longer programming routine, so all-keys-lost work takes more time and costs more.
• Blade style and cutting. Traditional edge-cut blades are quick to cut. High-security laser-cut blades, with a groove milled into the side, need a specialized machine and more care, and the blanks themselves cost more. If we have to decode a lock to find the cuts, that adds labor as well.

ILX key types explained

• Smart proximity key (push-to-start). Making a new smart key is mostly a programming job. The fob has to match the vehicle's FCC ID, frequency and chip, and then the keyless system must be told to accept it, normally through the OBD-II port. Depending on the platform, that can mean entering a PIN, waiting through a timed security procedure, or on some newer vehicles, using manufacturer online access. When every key is lost, certain models need a module removed and read on the bench. For your Acura ILX First generation (refreshed), we'll tell you which of those applies, and if a step is dealer-only, you'll hear it before we drive out. The emergency blade hidden inside the fob is cut by code during the same visit.

Why a spare key pays for itself

• Electronics fail without warning. A fob dropped on concrete, run through the washing machine or soaked at the pool can quit for good. With a second programmed key, that's an annoyance you fix on your own schedule, not a stranded car that needs attention today.
• When you sell or trade in the vehicle, buyers and dealers expect two keys. A missing key can come up during an appraisal or a private-sale negotiation, so having both on hand keeps the conversation about the car, not about what it will cost the next owner to replace one.
• Some vehicles make it hard to add a key once you're down to one. Certain immobilizer systems let an owner program an extra key on-board only when two working keys are present, so a second key preserves the easy options for later and avoids a full reset.

Tips from a mobile locksmith

• When a key's head cracks or its blade bends, replace it before it fails. A transponder chip can slip out of a split head, and a bent blade can break off inside the ignition or door lock, turning a simple key replacement into an extraction and repair job. Small symptoms are the inexpensive time to act.
• On any vehicle with a turn-key ignition, keep the key ring light. A heavy cluster of keys, tools and charms swings with every bump and slowly wears the ignition wafers and the key itself. When the key starts to stick or needs a wiggle to turn, deal with it early, before it stops turning entirely.
• Southern California heat is hard on keys. Fob batteries drain faster, plastic housings turn brittle, and rubber button pads crack when a key spends summer afternoons on a dashboard or in a sunny cup holder. Carry the fob with you or keep it shaded, and replace batteries before summer rather than after they fail.
• Photograph the back of your fob and any key tag that came with the car. The FCC ID, part number and key code printed there make ordering a replacement faster and more accurate. Store the photos somewhere you can reach from any device, not only on the phone that might go missing along with the keys.

Common Acura key problems

• Broken flip-key hinges on 2007-2013 MDX and RDX keys and 2009-2014 TL and TSX keys. The blade stops locking open or flops loose. A new shell can often reuse the original board and chip, but a cracked board means a new programmed key.
• Lost remotes on models with separate fobs. On the early TL, CL, RL, MDX, RSX and first-generation TSX, the chip lives in the key, so a missing remote only affects keyless entry and can be replaced on its own.
• Worn edge-cut keys on early-2000s Acuras. Two decades of use rounds off the cuts and makes the ignition sticky or hard to turn. A key cut to the factory code usually works better than a copy of the worn original.
• Weak smart key batteries. Most Acura smart fobs from 2009 on take a CR2032 coin cell. With a dying battery, holding the fob against the ENGINE START/STOP button usually lets the car read its chip and start anyway.
• Seized driver's door lock cylinders on smart key cars. The emergency blade almost never gets used, so the cylinder can corrode and refuse to turn the day the fob dies. Try your blade in the door lock every few months.
• Ordering the wrong fob online. Acura fobs that look identical can differ in frequency, transponder and memory position (Driver 1 or Driver 2). Match the FCC ID and part number on your current fob before buying, or let us source the part.
• Four-button spares on remote-start cars. Some 2014 and later Acuras shipped with a five-button fob that includes remote engine start. A four-button replacement will drive the car but won't start it remotely, so count your buttons before ordering.
• No-start after a key is dropped or run through the wash. A damaged chip can leave the key turning the ignition, or the fob locking doors, while the engine refuses to start. Testing the transponder tells us whether the key needs replacing.

Proof of ownership

Not every situation fits the simple case, so here's how we handle the common exceptions. For a leased or financed vehicle, a registration that lists you as the registered owner or lessee works with your ID. If you just bought the car, bring the signed title or bill of sale along with your ID. For a company or fleet vehicle, we need written authorization from the business plus the driver's ID. If the car belongs to a family member, the registered owner should be present or provide signed permission and a copy of their ID. Rental vehicles go through the rental company.