2019 Acura ILX Key Replacement

2019 ILX key specs

From the 2016 refresh on, every ILX uses a push-button smart key. Four-button fobs (lock, unlock, trunk and panic) carry FCC ID KR5V1X on earlier cars and KR5V2X on 2019 and later models, and five-button remote-start versions also exist. Some fobs are non-memory parts while others come as Driver 1 and Driver 2 versions, so the part number on your old fob matters. Each fob hides a mechanical emergency blade.

What's specific to the 2019 ILX

The 2019 Acura ILX is the fourth of 7 model years in the ILX First generation (refreshed) (2016–2022), so it shares its key system with the rest of that run, which makes replacement parts easy to source.

A 2019 Acura ILX is about 7 years old now. Original fob batteries are near the end of their life at this age, so weak range or a "key not detected" message is often a battery before it is a failed fob. Cars this age are often on their second owner, which is when a single remaining key and a request for a spare tend to show up.

Key options for the 2019 Acura ILX

• Smart proximity key (push-to-start). Proximity keys bring a security trade-off worth understanding. Because the fob is always listening, thieves with relay equipment can stretch its signal from inside your house to the car in the driveway. Keeping the fob away from exterior walls, or in a signal-blocking pouch, closes that gap, and some fobs offer a sleep mode described in the owner's manual. If a smart key for your 2019 Acura ILX is lost or stolen, programming a replacement is the moment to delete the missing fob from the car's memory. And be wary of used fobs from online sellers: a lot of them are locked to the vehicle they came from and can't be reprogrammed to yours.

How the Acura immobilizer works on the ILX

Acura fitted an immobilizer to essentially every car it sold here from 2000 on, and the type of chip tells you a lot about how a replacement key gets made. Through the early 2000s, the TL, CL, RL, MDX, RSX, NSX and 2000-2001 Integra used a Megamos 13 fixed-code transponder inside a conventional key, with keyless entry handled by a separate remote. The 2004 TL and TSX introduced Philips ID46 (Hitag 2) crypto chips, which later moved into flip keys on the MDX, RDX, TL and TSX. The 2005 RL brought Acura's Keyless Access smart key, and by the late 2010s nearly every Acura used push-button start with a Philips ID47 (Hitag 3) smart fob. The newest designs, such as the 2022-and-later MDX and RDX, the 2023 Integra and the ADX, use Honda's latest smart key generation, while the electric 2024 ZDX uses a GM-designed system. In every case the engine computer checks the chip before it lets the engine run, so a key that is only cut will turn the ignition without starting the car. A flashing key symbol on the dash usually means the car didn't recognize the chip.

• Parts catalogs list the refreshed ILX fob with a Philips ID47 (Hitag 3) transponder, the same chip family used on the TLX of those years.
• A four-button fob will lock and drive a remote-start ILX but cannot start it remotely, so match the button layout of the original if you use that feature.
• The KR5V1X (about 315 MHz) and KR5V2X (about 434 MHz) fobs run on different frequencies, so a pre-2019 fob won't program to a 2019 or later ILX.

Programming a 2019 ILX key

Refreshed ILX smart keys are registered through the OBD-II port with a key programmer that handles Honda's Hitag 3 smart system. Adding a spare and building a new key when every one is gone are both routine on this platform, and the remote functions program in the same session as the immobilizer. We cut the emergency blade to match your door lock so the spare still gets you inside with a dead battery.

Lost every key to your ILX?

1. Gather your documents and the VIN. Call with the year, make, model and VIN if you can read it through the windshield, plus where the car is parked. Those details let us confirm whether your Acura ILX can be done on-site and bring the right key, so the first trip is the only trip.
2. Get into the vehicle without damage. Entry comes before key-making because we need access to the ignition, the OBD-II port and sometimes the documents in the glove box. We take care with weather stripping, door frames and paint, and we confirm the dash VIN matches your registration before going any further.
3. Originate a new key from the car. With no key to copy, the cuts come from the vehicle itself. We retrieve the key code through manufacturer channels where possible, or decode a door lock with a pick-decoder tool. Then we cut the blade on our code machine and confirm it turns the lock smoothly.
4. Program the key to the immobilizer. Next, the new key is introduced to the car's security system. Many vehicles allow this through the OBD-II port with a PIN or security procedure. Some all-keys-lost cases require reading a module on the bench, and a few platforms only allow dealer programming, which we'll tell you up front.
5. Erase missing keys and add a spare. Once the car starts, we remove the lost keys from memory wherever the system allows, so they can't start the engine if someone finds them. Making a second key during the same visit costs much less than a repeat all-keys-lost call down the road.

Why a spare key pays for itself

• Some vehicles make it hard to add a key once you're down to one. Certain immobilizer systems let an owner program an extra key on-board only when two working keys are present, so a second key preserves the easy options for later and avoids a full reset.
• When you sell or trade in the vehicle, buyers and dealers expect two keys. A missing key can come up during an appraisal or a private-sale negotiation, so having both on hand keeps the conversation about the car, not about what it will cost the next owner to replace one.
• Two drivers sharing one key is a daily negotiation. A second key lets a partner, teenager or coworker use the vehicle without handing keys back and forth in parking lots, and it means one person losing their key ring doesn't leave the whole household stuck.

Dealer or mobile locksmith?

Price and parts are the other half of the comparison. Dealers typically sell factory keys only and charge their posted service rates for programming. We offer factory keys where it matters and quality aftermarket alternatives where they perform well, and the quote covers cutting, programming and the trip, with nothing tacked on at the end. Timing differs too. Dealer service departments generally keep business hours, while we take automotive calls every day from 6:30 a.m. to 11:30 p.m., which covers early commutes and late evenings. We're closed overnight, and we'll be upfront if your timing means the dealer or a next-day visit is the better plan. Neither option is wrong; the right one depends on your ILX and your schedule.

ILX key battery

Most fobs for a 2019 Acura ILX open along a small slot in the seam; a coin or a plastic pry tool works better than a screwdriver, which chews up the housing. If the fob hides a mechanical blade, slide it out first, since the case often opens from that gap. Note which side of the old cell faces up, swap in a fresh CR2032, and press the halves together until they click all the way around. Handle the new battery by its edges, because skin oil on the faces can hurt contact. In most cases the fob keeps its programming through a battery change, so test lock, unlock and start, and you're done.

How the job works

1. Identify the exact key your ILX uses. We ask a few quick questions on the phone: the year, whether the car starts with a turn key or a button, how many keys you have left, and whether the remote still works the doors. Then we check the VIN against our programming references so the van arrives with the correct blank or fob, not a close guess.
2. Verify ownership before any work. Before cutting or programming, we compare your government photo ID with the vehicle registration or title and check that the VIN on the paperwork matches the VIN on the dash. If the registration is locked inside, we open the car first, confirm the documents, and only then make the key.
3. Get the key code or decode the lock. If you still have a working key, we can read its cuts directly and check them against the factory depths for the Acura keyway. A worn key gets corrected back to spec during this step, so the new key turns crisply instead of reproducing years of wear in a fresh piece of metal.
4. Cut the blade on-site. Cutting happens right beside your car. For a smart key, that means the emergency blade hidden inside the fob; for a transponder or remote-head key, it's the main blade you'll use every day. We deburr the cuts and check the fit in each lock so nothing binds or sticks later on.
5. Program the chip, remote or smart key. With the blade done, we connect to the OBD-II port and register the new key with the immobilizer. Depending on the Acura system, this may involve a security PIN, a timed waiting period, or on-board button sequences for the remote. On some vehicles we clone a working key's chip instead, when that's the more reliable path.
6. Test everything and clear out old keys. The last step is a short walkthrough. We show you how many keys the car now recognizes, point out the dead-fob start method for your vehicle, and hand you an itemized receipt. If a spare makes sense, it's simplest to add it during this same visit while the equipment is already connected.

What affects the price of an ILX key

• Factory or aftermarket parts. Factory keys and fobs carry the manufacturer's part number and usually the highest parts cost. Quality aftermarket keys use compatible electronics at a lower price and work well on many vehicles. We tell you which options we trust for your car, and where an aftermarket version has known range or fit issues, we steer you to OEM.
• Programming complexity and security access. Two cars with similar-looking keys can program very differently. Newer platforms often guard key programming behind encrypted access or paid credentials, while older systems allow straightforward OBD-II pairing. We check the exact procedure for your VIN before quoting, so the number reflects the real work involved.
• Blade style and cutting. The blade still matters on keyless cars, because the emergency insert has to fit the door lock. Cutting by code is standard for us. Decoding a door lock when no key or code exists adds time, and so does progressing any cuts the door lock doesn't show.
• Travel, timing and extra repairs. Because we come to you, the distance from our San Bernardino base and the time of the call play a part. So does anything we find along the way, such as a worn ignition cylinder or a seized door lock. You hear about each item and get a quote before we start work.

Call (951) 903-3193 with your VIN and the keys you still have, and we'll quote the job before any work starts.

Common Acura key problems

• Broken flip-key hinges on 2007-2013 MDX and RDX keys and 2009-2014 TL and TSX keys. The blade stops locking open or flops loose. A new shell can often reuse the original board and chip, but a cracked board means a new programmed key.
• Worn edge-cut keys on early-2000s Acuras. Two decades of use rounds off the cuts and makes the ignition sticky or hard to turn. A key cut to the factory code usually works better than a copy of the worn original.
• Lost remotes on models with separate fobs. On the early TL, CL, RL, MDX, RSX and first-generation TSX, the chip lives in the key, so a missing remote only affects keyless entry and can be replaced on its own.

Tips from a mobile locksmith

• Photograph the back of your fob and any key tag that came with the car. The FCC ID, part number and key code printed there make ordering a replacement faster and more accurate. Store the photos somewhere you can reach from any device, not only on the phone that might go missing along with the keys.
• Southern California heat is hard on keys. Fob batteries drain faster, plastic housings turn brittle, and rubber button pads crack when a key spends summer afternoons on a dashboard or in a sunny cup holder. Carry the fob with you or keep it shaded, and replace batteries before summer rather than after they fail.
• Every so often, use the mechanical blade in the driver's door lock. Cylinders that go years without a key can seize from dust and dried grease, and you won't find out until the day the fob dies and the blade is your only way in. A small shot of dry lubricant keeps the lock ready.

Proof of ownership

Before we cut or program a key for any vehicle, we verify that you have the right to it. Please have two things ready: the current registration or the title, and a government-issued photo ID with a matching name. We also check that the VIN on those documents matches the VIN plate on the dashboard. If the registration is locked inside the car, that's fine; we open the vehicle first, check the paperwork in the glove box, and only then make the key. If something doesn't line up, we stop and sort it out before any key is made.

Need a 2019 Acura ILX key?

Need a key for your 2019 Acura ILX? Call Julian's Locksmith at (951) 903-3193 with your VIN and tell us which keys you still have. We'll confirm what the job involves, give you a quote before any work starts, and come to you in Southern California with everything needed to cut and program the key on the spot.