Same Key for All House Locks in Westminster

What to know first in Westminster

The question that decides how simple this will be is which keyways you have. Kwikset KW1 and Schlage SC1 are the two you'll find on most Westminster homes, and they don't accept each other's keys. Kwikset's SmartKey cylinders use the KW1 keyway, so a SmartKey deadbolt can share a key with an older pin-tumbler Kwikset knob, and Baldwin's Prestige and Reserve lines run on SmartKey too. Many store-brand locks are built to take a KW1 or SC1 key, which often lets them join the plan. Mixing Schlage's five-pin SC1 and six-pin SC4 cylinders is normally workable; we pin them so one key runs both. Where brands collide, there are three paths. We can replace the odd lock with one in your main keyway, fit a matching cylinder if the hardware accepts one (mortise and rim locks usually do), or occasionally convert the whole house to the other brand if that side has fewer locks. High-security cylinders from makers such as Medeco or Mul-T-Lock are a separate conversation, since their patented keys can't be cut from standard blanks. We lay out each option with its cost before any work starts.

What we can do on-site

• Rekeying same-brand locks to one key. Same-brand houses are the easy case. A home fitted throughout with Kwikset, or throughout with Schlage, can usually be brought to one key using only pins, springs and a code-cut key. No hardware gets replaced, the trim stays as it is, and the visit mostly consists of disassembly, re-pinning and careful testing at each door.
• Smart locks and keypads on the house key. Some smart locks ship with cylinders in a proprietary keyway that no standard key blank fits, and key-free models have no cylinder at all. We'll tell you which category yours falls into. For a proprietary cylinder, the choice is living with one extra backup key stored safely or switching to a model whose cylinder can match.
• Garage entry and side door locks. The door from the garage into the house is one burglars like, because a stolen remote or a forced side door gets them into the garage unseen. That lock deserves the same attention as the front door. We rekey it, along with any garage side door, to your one key and check that both deadbolts throw fully.
• Gates, sheds and padlocks. Not everyone wants the yard on the house key. If a gardener, pool tech or neighbor needs gate access only, keep the gate on its own key or fit a keypad gate lock, and leave the house on your main key. We set it up whichever way fits how your property actually gets used day to day.
• Matching new hardware to your existing key. Adding a lock to a door that never had one, such as a deadbolt on the house-to-garage door, is a good time to call. We install it, set the bolt and strike properly with long screws into the framing, and pin the cylinder to the key you already carry, so nothing new goes on your ring.

Local factors in Westminster

Busy households are where one key pays off most. Kids coming home from school, a parent leaving early, a grandparent watching the children after work: nobody wants to explain which key opens the side door. In the family neighborhoods of Westminster, rekeying the front, back and garage entry doors to one key means every family member carries the same key and gets inside on the first try.

Apartment renters can rarely change locks without permission, and many complexes rekey units themselves between tenants. If your Westminster apartment has a deadbolt and knob on different keys, ask management to key them alike at the next rekey. If they approve a private locksmith, get it in writing and give the office a copy of the new key, since leases usually require one.

If you leave before dawn and return after dark, fumbling through keys at an unlit door is a daily annoyance. One key for every door lets you lock the back door, the garage entry and the front in seconds. Since our hours start at 6:30 a.m. every day, we can often schedule the rekey before you head out on SR-39 or as you get home.

Situations this covers

• For example, a remodel leaves a Westminster home with a handsome new front door and a designer handleset still keyed to its factory combination, while the rest of the house runs on one Kwikset key. If the handleset accepts a KW1 cylinder, we'd swap or re-pin it to match; if it uses its own keyway, we'd check whether a compatible cylinder is available before suggesting anything else.
• Picture a household that hires a pet sitter twice a month and doesn't love handing over the one key that opens everything. We'd key the front, back and garage doors alike for the family, then fit a keypad deadbolt on the garage side door. The sitter gets a code that can be deleted anytime, and the keypad's backup cylinder still matches the family key.
• Say a homeowner installed a Schlage Encode on the front door last year and still carries an old Kwikset key for the back door and garage. Because the Encode takes a Schlage cylinder, the fix would be swapping the two Kwikset locks for Schlage hardware and keying them, plus the Encode's backup cylinder, to one key, so a dead battery never sends anyone hunting for a different key.
• Say an older Spanish-style home near Sid Goldstein Freedom Park and the Vietnam War Memorial still has its original mortise lock on the front door, plus a newer deadbolt above it. The owner wants both on one key along with the back door. If the mortise body is sound and accepts a standard threaded mortise cylinder, we'd fit one in the house keyway and key it to match the deadbolt and back door.

From your call to the finished job

1. Send photos and a count of your locks. Walk the house before you call and count every keyed lock you use, including the garage entry, side door, security screen door and gate. A knob and a deadbolt on the same door count separately. A realistic count lets us give an honest estimate and plan enough time on-site.
2. Gather a working key for each lock. Before we arrive, find a key that opens each lock, even if it's a worn copy. With a working key, the plug comes out in moments. Without one, we pick or otherwise open the cylinder first, which adds time but is usually still cheaper than replacing the lock.
3. Verify ownership and confirm the plan. On arrival we verify that you own or live in the home, usually with ID and something showing the address. Then we walk the doors together, mark each lock as rekey, replace or leave out, and confirm the price before any cylinder comes off a door.
4. Pick the new key combination. The new key is cut by code first and becomes the pattern for every cylinder. Starting from a fresh, code-cut key avoids inheriting wear from an old copy, which matters because every lock in the house will be pinned to it.
5. Rekey and reinstall each cylinder. Door by door, we remove the cylinder, slide the plug out with a follower, replace the key pins to fit the new key and add fresh springs where needed. Each cylinder is tested on the bench before it goes back in, then again once it's mounted on the door.
6. Test every door and hand over the keys. With all locks back on, we test each new key in every door from outside, with the door closed so the bolt has to drive into the strike. Your old keys get tried too, and they should fail everywhere. Then you get your copies, and we count them with you.

Pricing factors

• How many cylinders you're matching. Counting locks before you call keeps the quote honest. People often forget the garage side door or a lock on the security screen, then add them during the visit. That's fine, since we'll requote on the spot, but a complete count from the start lets you budget accurately.
• Whether all locks share a keyway. A house fitted entirely with one brand is the least expensive to put on one key, since everything is a rekey. Every lock in a different keyway needs a replacement cylinder or replacement hardware, and that changes the total more than anything else. We'll show you how the numbers compare for each option.
• Missing keys and stuck locks. A working key for each lock keeps the job simple. A lock with no key has to be opened first, by picking or decoding, before it can be rekeyed. That's usually still cheaper than replacing it, but it adds labor, so let us know in advance which locks have no key.

Every job gets a clear quote before any work starts. Call (951) 903-3193 with the details and we'll tell you what to expect for your situation in Westminster.

Advice before you book

• If you have a keypad or smart lock, keep its backup key on your main ring rather than in a drawer. Once its cylinder is keyed to match the house, the key you carry every day also solves a dead-battery lockout, which happens more often than people expect.
• Look at the head of each key. Most residential keys carry the brand name or a blank code such as KW1 or SC1. If every key on your ring says the same thing, getting one key for the whole house will probably be a straightforward rekey without any new hardware.
• Use a dry lubricant made for locks, such as a graphite or PTFE product, once or twice a year. Oil-based sprays attract dust and gum up pins over time, especially in hot, dusty inland summers, and a sticky cylinder is the first thing that makes a one-key setup feel unreliable.
• Keep your spare with a trusted neighbor or in a lockbox you control, not under a mat, in a fake rock or on top of the door frame. With a single key running the whole house, a hidden spare that a stranger finds is a key to everything you own.

Common errors that cost time and money

• Filing or grinding a key so it fits a lock with a different keyway. A modified key can get stuck or snap inside the cylinder, and it still won't operate the lock reliably. A different keyway needs a different cylinder, not a reshaped key.
• Buying a new lock combo pack and assuming it'll match the locks already on the house. Factory packs are keyed alike only within the box, or to other boxes printed with the same keying code. Unless the new lock gets rekeyed to your existing combination, you've just added another key to the ring instead of removing one.
• Forcing a SmartKey reset with the wrong tool or without a working key. The SmartKey process only works when the current key turns the cylinder properly. Forcing it can jam the sliders and leave the lock unusable until a locksmith resets or replaces it.

Getting to Westminster

Westminster is about 61 miles from our San Bernardino base, roughly 65 minutes in light traffic via I-215 South through Colton and Grand Terrace to SR-91 West in Riverside, SR-91 West through Corona and Santa Ana Canyon to SR-55 South or SR-57 South. When you call, you get an arrival estimate based on where the technician is and the traffic at that moment.

We plan the drive the way a delivery route gets planned: freeway first, SR-22 where it makes sense, then the side streets you describe. A landmark or the color of your building helps the technician spot you.

About Westminster: Reverend Lemuel Webber founded Westminster in 1870 as a Presbyterian temperance colony, and the name comes from the 1643 Westminster Assembly of Presbyterian doctrine.

Planning a rekey in Westminster?

Call (951) 903-3193 and tell us how many doors you want on the new key and the brand of the locks if you know it. We'll quote the rekey before any work starts.