Skip to content
Julian's Locksmith

West Covina, Los Angeles County

Rekey or Replace Locks: A West Covina Locksmith's Decision Guide

Short answer: Rekey when a lock works smoothly, is decent quality and you only need different keys. Replace when it sticks, wobbles, shows heavy wear, is low-grade, or no longer suits the door or your plans. Most West Covina homes end up with a mix. Julian's Locksmith tests each lock at your door, explains both options and quotes before work begins. Call (951) 903-3193.

Rekey or Replace Locks in West Covina, CA — Locksmith rekeying a residential lock cylinder

Old does not mean weak. A heavy brass deadbolt from the 1970s can outlast three generations of box-store replacements, and a mortise lock in a West Covina bungalow may be better made than most of what's on the shelf today. New does not mean strong either: plenty of boxed locks are light Grade 3 hardware with thin latches and plastic internals. That is why we judge a lock by its construction, wear and fit, not its age. Julian's Locksmith brings rekeying tools and replacement hardware to the door, so you can decide on the spot. Call (951) 903-3193.

What to expect in West Covina

Most whole-house decisions end up as a hybrid, and that is usually the smart answer. Replace the two or three locks that fail the test or guard the most, typically the front door, the garage entry and a sliding door, and rekey everything else to match. The new locks can use whichever keyway you choose, which lets you standardize the house on one brand. Because Kwikset and Schlage use different keyways, a Kwikset deadbolt can't be re-pinned to take a Schlage key, so putting the whole house on one key sometimes means replacing the odd locks out. We lay out the plan on paper before work starts, with each lock marked keep, rekey or replace and a quote for the total, so you can approve the entire plan or just part of it. Hybrid plans also protect your budget: the front door gets the stronger hardware it deserves, the less exposed doors keep the locks they already have, and nobody pays to replace hardware that was working.

What we can do on-site

  • Handlesets and decorative entry hardware. Finish deserves its own thought. Oil-rubbed bronze wears through to brass at the grip, polished brass tarnishes unevenly, and satin nickel stays quiet. Replacing one handleset with a different finish beside others looks off. We show you samples and tell you honestly when rekeying is better than chasing a discontinued color.
  • Mortise locks and older hardware. Skeleton-key and warded locks can't be rekeyed in the usual sense, since they have no pins to change. We can cut a working key if you've lost one, but we're candid that warded locks offer little security. Many owners keep the antique lock for looks and add a modern deadbolt discreetly alongside.
  • Putting a mixed-brand house on one key. Not every exterior lock has a keyed cylinder. Sliders, garage entries and side gates may use handles, bars or padlocks. We map every keyed lock first, then propose how many need replacing to reach one key. The count is often smaller than people fear, because most rekeys work with what's already there.
  • Smart locks and keypads: the key side still matters. Not every smart lock fits every door. Thin doors, odd backsets and bored holes of unusual size can rule models out, and heat shortens battery life. We tell you plainly when a model won't suit the door, and when a keypad isn't worth the added trouble for how you live.
  • Rental, HOA and matching-finish rules. Many HOAs set rules for exterior hardware: finish, style and sometimes brand. A rekey leaves everything as approved. A replacement has to match, and some associations ask for approval first. We bring the finish samples and read the rules with you before we recommend swapping anything on the front of the home.

How West Covina shapes the job

Storefronts in West Covina run on aluminum-framed glass doors with narrow-stile locks, such as Adams Rite, and the cylinder is often the only part worth changing. Rekey the cylinder when a key is lost or an employee leaves; replace the lock if it sticks or the latch is worn. Because you can't leave a storefront open, we schedule around your opening so the door is working and secured when you are.

Older homes in West Covina often carry hardware worth saving: heavy brass deadbolts, glass knobs, mortise sets with decorative plates. Rekey those, because replacements rarely match the quality or the look. Replace what the years have worn out, such as loose spindles, painted-over latches and thin add-ons from the 1980s. Door prep in older houses can be non-standard, so we measure before suggesting any swap and say so when a carpenter should look at the frame.

Inland heat shortens the life of locks. Plastic parts warp, finishes fade, and smart lock batteries drain faster. Rekey metal-bodied locks that still work smoothly; replace those with brittle internals or sun-faded plating. Wood doors swell in summer, which can mimic a failing lock when the real problem is alignment. We check the door first, so you don't replace a lock that only needs the strike adjusted.

Common situations

  • A rural property near Baldwin Park has a gate padlock, a barn hasp and a house deadbolt, all on different keys, and the gate lock has rusted solid. The deadbolt rekeys easily. The padlock is replaced with a weather-rated shrouded model, and the barn lock is swapped for a keyed-alike one. Three keys become one, and the whole property is handled in a single visit.
  • A landlord with a four-unit building off Barranca Street wants every door ready for a new tenant. Three deadbolts are solid; one has a loose bolt and a cracked rose. We rekey three on the spot and replace the fourth. The landlord gets a keying chart showing which key opens which unit, and a note on what was done.
  • A retired resident with arthritic hands finds round knobs hard to turn. The locks work fine, so a lost key alone would mean a rekey, but comfort is the real issue. We replace the knobs with lever handles in a matching finish and rekey the deadbolt at the same time. Sometimes the decision is about function, not security.
  • A keypad deadbolt near Walnut keeps draining its batteries every summer. After checking, we find a warped door pulling the bolt tight against the strike, forcing the motor to work harder. The lock isn't the problem. We realign the strike, leave the lock in place, and rekey only the override cylinder because a spare key went missing.

Step by step with Julian's Locksmith

  1. Tell us what happened and what you want. Start with the reason: a lost key, a move, a worn lock, a break-in, or a plan for a smart lock. Tell us how many doors are involved and the brand names if you can read them. A few phone photos of each lock help us arrive prepared.
  2. Show you're allowed to decide. Businesses should show they manage the premises, with an ID plus a lease, license or authorization letter. For multi-tenant buildings, we confirm who controls which door before touching anything. It's a few minutes of paperwork that avoids bigger problems later.
  3. Run the door test on every lock. Then we look past the lock to the door and frame: the strike plate, the screws, the hinges, the weatherstripping and the gap around the edge. A good lock on a weak frame fails where the frame is weakest, so we note anything that needs attention.
  4. Sort each lock: keep, rekey or replace. We lay out a verdict for each lock with the reason beside it, so the logic is visible. Nothing is hidden behind jargon, and you can ask about any line. The list becomes your plan, whether you accept all of it or only part.
  5. Do the work and test every key. If a lock fails its test during assembly, such as a rough turn or a bolt that won't retract, we fix it on the spot or swap in another. You hear about any problem right away, and nothing is left for you to discover next week.
  6. Leave with keys, old parts and a written list. We write down the brand, model, grade and finish of every new lock, along with which locks were rekeyed. That list helps with insurance questions, future parts and the next time someone asks whether a lock was ever changed.

How we quote the job

  • Labor per cylinder on a rekey. A rekey is priced mostly by the number of cylinders, since each one is removed, re-pinned, tested and refitted. One front-door deadbolt is a small job; a house with eight keyed locks is a bigger one. We quote per lock so you can see what each adds.
  • Door prep and fit. Mortise hardware lives in a deep pocket. Replacing the whole body can mean cutting a new pocket, so we often prefer to rekey or swap the cylinder instead. When replacement is truly needed, the door work becomes a real part of the estimate.
  • Brand conversion and keyed-alike plans. Getting one key across Kwikset and Schlage locks means replacing one set with the other brand, since their keyways differ. The cost is the new hardware plus labor, and it's often worth it for the convenience of a single, simple key ring.

Every job gets a clear quote before any work starts. Call (951) 903-3193 with the details and we'll tell you what to expect for your situation in West Covina.

Practical tips before you call

  • Lubricate before you judge. A sticky lock may only need a puff of graphite or dry PTFE in the keyway, and a squeaky latch may need only a dab at the bolt. Skip oil sprays, which gather grit. If dry lube doesn't cure it, the lock is telling you something.
  • If you want one key for the house, choose the brand before you choose the lock. Kwikset and Schlage keyways don't interchange, so your count of each brand decides how much needs replacing. Pick the brand you own most of, or the one whose parts are easiest to find.
  • Look at the door and frame before spending on a lock. A strong deadbolt in a split jamb or a thin hollow door is a vault door on a tent. The money may do more good on a reinforced strike, longer screws or a solid-core door.
  • Check the inside of each door too. Make sure everyone in the home can open the main exit quickly without a key, including children and older adults. A lock that works for you but traps someone in an emergency isn't doing its job.

Mistakes to avoid

  • Replacing a good lock because a key went missing. A sound handleset or deadbolt only needs new keys, and rekeying delivers that for far less than new hardware plus installation. You also avoid the hunt for a matching finish. Check the lock's condition first.
  • Buying a lock before measuring the door. Backset, bore size and door thickness decide what fits, and a wrong box means returns or drilling into your door. A quick measurement, or a photo sent to us before you shop, saves real aggravation.
  • Rekeying a lock that is already failing. If the latch drags or the plug is worn, new pins won't fix it, and you'll pay for the rekey now and the replacement soon after. Run the wiggle and bolt tests before you commit to re-pinning anything.

Getting to West Covina

West Covina is about 42 miles from our San Bernardino base, roughly 47 minutes in light traffic via Palm Avenue to I-215 North, I-15 South to I-10 West. When you call, you get an arrival estimate based on where the technician is and the traffic at that moment.

Traffic matters more than mileage. We check conditions on Nogales Street and its connecting routes before quoting you a time, and we don't pretend a long drive through heavy congestion is a short one.

About West Covina: The Hurst family bought land at Orange and Merced Avenues in 1906, and Hurst Ranch survives on about three and a half acres as a reminder of the area's walnut and orange groves.

NeighborhoodsSouth Hills, Cortez Park area, Eastland Center area, Merced and Orange Avenues, Amar Road corridor, Galster Park and the Aroma Drive hillside
ZIP codes91790, 91791, 91792, 91793
Main routesI-10, Garvey Avenue North and South, Azusa Avenue, Citrus Street
From our San Bernardino baseabout 42 miles via Palm Avenue to I-215 North, I-15 South to I-10 West (San Bernardino Freeway) through Ontario and Pomona, exiting at Citrus Street, Azusa Avenue or Vincent Avenue; alternate via SR-210 West to Azusa Avenue and south through Covina

We start at half past six every morning, seven days a week. Every day the phones stay on until 11:30 at night, so an after-dinner lockout is usually still within reach. Saturday is no exception, with service ending at 11:30 at night. Call early that day if the problem can't wait until Sunday morning.

Safes get the same scrutiny. Before drilling or manipulating one, we need reason to believe it's yours: a purchase record, the fact that it sits in your home or business, or estate paperwork if you inherited it. A safe exists to keep people out, so proof of ownership isn't optional.

Locked out in West Covina?

Call (951) 903-3193 with the address and what's locked. You'll get an arrival estimate and a quote before anyone heads out, and when we arrive we'll ask for ID that ties you to the property. If a child or pet is shut inside a hot car or building, call 911 first.

Frequently asked questions

Can you rekey a lock if I've lost the only key?

Yes. Without a working key, we pick the cylinder or remove it, then re-pin it. That takes longer than a rekey with a key in hand, and it may affect the price. We verify that you own the property or may authorize the work before starting, and we cut the new keys on site.

When is replacement the only sensible option?

When the lock is damaged, drilled, pried or punched; when the latch or bolt is bent; when the plug is so worn that the key sticks or breaks; when plating is gone and parts are corroded; when screws no longer hold; or when you want features the lock lacks, such as a keypad or lever. In those cases, re-pinning only delays the problem.

Can I rekey the lock myself with a kit?

On many Kwikset and Schlage locks, yes, and Kwikset SmartKey is designed for it. A kit works if the lock is in good condition and you follow the steps carefully. Typical mistakes include mixing up pins and ending with a lock that opens for the wrong key. We're glad to finish a job that went sideways, or to rekey a set you would rather not touch.

What do lock grades mean, and do they change the decision?

ANSI/BHMA grades rate how well a lock withstands wear and force. Grade 1 is the toughest, Grade 3 is basic residential, and Grade 2 sits between them. A Grade 1 or 2 lock that works smoothly is worth rekeying. A Grade 3 lock on a front door is a reasonable candidate for an upgrade, especially if it already shows wear.

Can I put locks from different brands on one key?

Not by rekeying alone, because Kwikset and Schlage keyways differ and a key for one won't enter the other. To reach one key, we replace the locks that don't match your chosen brand. Within a brand, most locks can share a key. We count each brand first and tell you how many changes the plan takes.

What is the difference between rekeying and replacing a lock?

Rekeying changes the pins inside the lock so a different key works and the old one doesn't. The lock itself, including its bolt, latch and finish, stays. Replacing swaps in a new mechanism entirely. Rekeying fixes a key problem; replacement fixes a lock problem. If you have both, such as a lost key and a worn latch, you may need both.

How far is West Covina from your base?

West Covina is about 42 miles from our San Bernardino base, roughly 47 minutes in light traffic. Arrival time depends on traffic and on the job the technician is finishing, so we give you an estimate on the phone before you commit.

Rekey or Replace Locks in nearby cities

From the blog

Call now(951) 903-3193

Daily 6:30am–11:30pm