Keys Locked in Trunk in Temple City, With Help That Comes to Your Car

What to expect in Temple City

Car trunks are built to stay shut against someone sitting in the cabin. That's deliberate: it's where you leave a laptop bag while you eat, and it's what a valet key is meant to keep out of reach. Engineers back that up with several layers. Many sedans include a trunk cancel or valet switch in the glove box that disables the dash release button. Some put the seatback pulls inside the trunk so the rear seats can't be folded from the cabin, and a few add a small keyed lock on the seatback or the armrest pass-through. None of this makes keys locked in trunk hopeless, but it does explain why prying a lid is a poor idea. Trunk lids are stamped thin around the latch, and a bent edge leaves a gap that lets water in and rattles over every expansion joint. The professional approach starts at a door, then uses whichever release the manufacturer left in the cabin. On cars that still have an exterior trunk keyhole, picking that cylinder with a Lishi tool is a clean alternative. We'll tell you which layers your model has before we begin.

How we can help in Temple City

• Interior trunk releases and cancel switches. Once inside, we look for the release your car already provides: a dash button, a switch on the driver's door, or a lever on the floor beside the seat. Many sedans also hide a glove-box switch that disables the dash button. If it's set to off, flipping it back often ends the job on the spot.
• Picking or decoding the trunk lock. Plenty of cars still have a keyhole on the trunk lid or tucked behind the emblem. When cabin routes are blocked, we pick that cylinder with a Lishi tool made for the keyway. It turns like your key and pops the latch without leaving a mark on the paint.
• Smart fobs sealed in the trunk. A push-start car that locked with the fob in the trunk is usually healthy once a door is open, because the interior trunk button still has power. We open the door, press the release, and the fob is back in your hand. Then we test the lock button so you know the car still recognizes it.
• Dead battery behind a locked lid. Some power trunks and liftgates won't move on low voltage even after a jump, because the motor needs more current than the latch does. We keep the pack connected longer, release the latch first and lift by hand where the design allows, never forcing a powered strut.
• Convertibles, coupes and older cars. Older cars with a trunk keyhole and no power release are often straightforward: the cylinder can be picked, and the same key usually fits the doors too. Worn wafers and dried lubricant are common on cars that sat in the sun for years, so we take it slowly and lubricate as we go.

Local factors in Temple City

Townhome garages are often tandem: two cars nose-to-tail in a narrow bay, the rear car's trunk against the garage door and the front car's trunk inches from a bumper. With the keys locked in back, the car stays put. We work around that by opening the cabin and using the seats or a partly raised lid. Shared motor courts may also need a quick word with a neighbor about where our van parks.

Downtown street parking and multi-level garages bring meters, time limits and low clearances. If your car is at a meter, keep an eye on the clock while you wait, because the car can't move until the keys are out. For garages, give us the level and stall number, since some structures limit service vans on upper decks. If you're between meetings, say so and we'll give you a realistic window.

Apartment parking puts cars tail-in against block walls, carport posts and the neighbor's bumper. A trunk backed against a wall may only open a few inches, and with the keys inside, the car can't be moved. In that case we open the cabin, release the latch and reach through the gap, or work from the seatbacks instead. Gated garages also mean we'll need a code or a meeting point near LASD Temple Station on Las Tunas Drive.

Example situations

• A college student borrows a parent's hatchback for the week, and the keys end up in a backpack under the cargo cover after a late class near Live Oak Park and Community Center. The registration is in the parent's name. We'd open a door, compare the student's ID with the registration in the glove box, and phone the parent if anything is unclear before reaching under the cover for the backpack.
• A typical example: you're loading a flat of bottled water and a case of paper towels into a sedan at a warehouse-store lot off I-210. The keys go on top of the flat while you rearrange, the lid comes down, and the doors relock a few seconds later. We'd open the driver's door with a wedge, press the dash release and check your license against the registration in the glove box.
• Moving day, for instance: a hatchback packed to the roof with boxes, keys set on a carton near the liftgate, gate pulled shut. The doors are locked and the second row is buried under lamps and bedding. In a case like that, we'd open a front door, slide the passenger seat forward and work a reach tool over the stacked boxes instead of unloading the whole car in the parking lot.
• A common jobsite example: a contractor's pickup at a new-build site near Las Tunas Drive, the truck keys tossed into the cross-bed toolbox along with a drill case. The lid snaps shut and locks. The cab is still open, but the spare key is back at the office. We'd pick the toolbox lock at the paddle handle, hand back the keys and make sure the latch still catches before we go.

Step by step with Julian's Locksmith

1. Tell us what's locked and where the keys are. Describe the key: a plain metal key, a key with a remote head, or a push-start fob. Mention whether your phone, wallet or registration is also in the trunk. That shapes how we'll verify ownership once the car is open.
2. Get a quote and an honest ETA. If the spare-key route looks quicker or cheaper for you, we'll say so plainly. If our quote works for you, we confirm the address and the vehicle, and you know the price before we pull up.
3. Open the cabin. If the doors are locked, we open one first using a protected air wedge and reach rod, or a Lishi pick on the door lock. The goal is entry without marks on paint, glass or weatherstrip. If a door is already unlocked, we skip this step entirely.
4. Reach the trunk the way the car allows. This stage takes longest on sedans with locked seatbacks and no trunk keyhole. We work patiently with lights and long reach tools, and we tell you what we're doing as we go instead of leaving you to wonder.
5. Recover the keys and verify ownership. If the car is registered to a spouse, parent or employer, we may ask to call them or see a written authorization. It's a minute of inconvenience that protects you just as much as it protects us, and it keeps the job above board.
6. Test everything and prevent a repeat. Before we leave, we close and reopen the trunk with your key or fob, test the dash release and confirm the doors lock and unlock normally. If the glove-box switch was off, we show you where it is so it doesn't catch you out again.

Pricing factors

• Battery and electrical condition. Power trunks and liftgates on a weak battery can need extra time and a careful manual release. We build that into the quote when we expect it from your description. If we discover it on site instead, we explain the added work and its price before continuing.
• Distance, access and time of day. Calls late in the evening, near our 11:30 p.m. Sunday-through-Thursday cutoff, may be priced a little differently from midday calls. We're open every day, including Fridays and Saturdays. We'll tell you up front if timing affects your quote.
• Truck boxes, covers and specialty vehicles. Keys locked in a pickup's toolbox or under a locking tonneau are priced by the lock involved. Simple wafer locks on toolboxes usually pick quickly. High-security cover locks or camper shell handles take longer and occasionally need a replacement cylinder afterward.

Every job gets a clear quote before any work starts. Call (951) 903-3193 with the details and we'll tell you what to expect for your situation in Temple City.

What not to do

• Prying the trunk lid with a screwdriver or tire iron. The metal around the latch is thin, and a pried lid rarely sits flush again. The result is wind noise, water pooling in the trunk and a body shop bill far larger than a locksmith visit would have been.
• Calling a number from an ad that won't give you a business name or a price over the phone. Ask for the company name and California locksmith license number before anyone comes out, then check it at search.dca.ca.gov while you wait.
• Pulling wires behind the dash or a trunk panel trying to trigger the latch. Modern cars run airbag, body-control and lighting circuits side by side, and a short can blow fuses or damage modules that cost far more than the lockout ever would.

What to do before we arrive

• Don't store the spare fob in the glove box. If the car locks with the main fob in the trunk, a spare behind locked doors does nothing for you. Keep it at home, at work, or with someone nearby who can drive it over when you call.
• Treat insulated cooler bags, steel toolboxes and padded laptop sleeves as bad places for a smart key. They block the low-frequency signal the car uses to find the fob. If the fob must go in a bag, use an outside pocket away from metal and electronics.
• If you drive a push-start car, test how it reacts to a fob left in the trunk, safely. With a spare fob in your pocket, put the main fob in the trunk and close the lid. Some cars beep or pop the lid back open; others say nothing at all, which is worth knowing.
• Replace the fob battery once a year or at the first sign of reduced range. A weak coin cell makes it harder for the car to sense a fob sitting in the trunk, which makes it more likely the car locks itself with your only key behind the lid.

Reaching Temple City

Temple City is about 49 miles from our San Bernardino base, roughly 55 minutes in light traffic via I-215 South to SR-210 West. When you call, you get an arrival estimate based on where the technician is and the traffic at that moment.

Stuck on the shoulder or in a parking lot along Encinita Avenue? Get somewhere safe, turn on your hazards, and give us the nearest exit or business so we can find the car without guessing.

About Temple City: The 2020 census counted 36,494 residents in 11,734 households averaging just over three people each, and the Census Bureau estimated 34,989 residents in 2024.

Friday is a full day for us. We begin at 6:30 a.m. and close at 11:30 p.m., the same as every other day, Saturday included. If a lock fails after 11:30 p.m., call us when we reopen at 6:30 a.m., and in the meantime fall back on a neighbor's spare key, a night with family, or a door you can secure from inside.

Car keys are made only for the registered owner or someone the owner has authorized. Have your driver's license plus the registration or title ready, and we match the name and VIN before cutting or programming anything. If the paperwork is inside the locked car, we open it first and check before going further.

Locked out of your car in Temple City?

Call (951) 903-3193 with the year, make and model and where the car is parked. You'll get an arrival estimate and a quote before anyone heads out. If a child or pet is shut inside a hot car or building, call 911 first.