Rekey All House Locks in Sierra Madre, With Nothing Missed

How this works in Sierra Madre

All means more than most people expect. On a typical single-family home, the list starts with the front door, which often has two cylinders: a deadbolt plus a knob or lever, or a handleset whose key lives in the deadbolt. Add the back door, the door from the garage into the house, and the garage side door, each commonly with a knob and a deadbolt. Then come the outliers: a steel security screen with its own cylinder, French doors with a euro cylinder, a slider with a small keyed latch, a side gate with a keyed deadbolt or rim lock, an RV gate padlock, a shed, a casita or a keyed home office. Some homes also have keyed window locks or a manual T-handle on an older overhead garage door. Mailboxes are separate: they're small cam locks with their own keys, and cluster boxes follow post office or HOA rules. When you set out to rekey all house locks, the first job is writing that list down, because a cylinder that never makes the list never gets re-pinned.

Work included on a typical visit

• Re-pinning every exterior door. The core of the job is re-pinning each exterior door cylinder to the new key: deadbolts, knobs, levers and handlesets on the front, back and side entries. We work one door at a time, test it locked and unlocked from both sides, and only then open up the next. Your house is never left with several doors apart.
• Gates, fences and pool enclosures. Gate hardware lives outdoors full time, so cylinders there are often the grittiest on the property. Some clean up and re-pin well; others are rusted past saving. We tell you which is which, and where a gate lock needs replacing, we fit a weather-resistant one keyed to the same key as the rest of the house.
• Bringing mixed brands onto one key. Standardizing on one brand pays off later too. Spare parts, future rekeys and added locks are simpler when the house shares a single keyway. If you're planning to replace a few worn locks anyway, a whole-house rekey is the natural moment to bring everything onto one brand and one key in a single trip.
• Separate keys and simple master keying. For most single-family homes, the best plan is the simplest one that fits how you live. One key for the house, perhaps one for an outbuilding, and keypad codes for occasional visitors usually covers it. We'll suggest a structure, but you choose, and the plan is written down before any pins come out.
• Key cutting, key count and a key record. We leave a simple key record: which doors take which key, how many keys were cut, and who you plan to give them to. It sounds like paperwork, but a year later, when someone asks for a key, that list tells you if you're about to repeat the problem that led to the rekey.

How Sierra Madre shapes the job

Houses built before 1980 in Sierra Madre often show their age at the keyhole: brass knobs from the 1950s, a deadbolt added in the 1980s, a mortise lock on the front door and a different brand in each room. A whole-house rekey here begins with an honest look at which pieces still work. Original mortise sets can often be rebuilt and re-pinned, while worn knobs and loose latches are better replaced. We aim to keep the character and still end up on one key.

Hillside and foothill homes in Sierra Madre often have multiple levels, deck doors, side stairs and retaining-wall gates, so the entry count runs higher than the doors you use daily. Wind-driven dust and ash settle into cylinders, and we clean each one as we re-pin it. Keep exits operable from inside for fire season, and make sure whoever evacuates with the family keys knows which ones matter. We plan for steep driveways when scheduling.

Larger homes in Sierra Madre can carry a long list of keyed locks: multiple entries, guest houses, wine rooms, pool houses, safe rooms and gates. Rekeying all of them is a project, so we map the property first and often recommend a master key arrangement, with household staff carrying keys only for their areas. High-security keyways with controlled blanks deserve a conversation, and we'll say honestly when a low-voltage contractor should handle electronic systems.

Example situations

• Over twenty years, a family in Sierra Madre has handed spare keys to neighbors, a pet sitter, two babysitters, a visiting cousin and a long-gone housemate. Nobody can say who still has one. Instead of chasing each key, the couple rekeys every lock and decides to issue just three new keys, with a keypad code for anyone who needs occasional access.
• Two siblings inherit their parents' house near West and find a kitchen drawer holding over twenty keys, some labeled and most not. Rather than match each key to a lock, they decide to rekey everything. We confirm they can act for the estate, walk the property, re-pin the house, garage and gate, and put the workshop on its own key for whichever sibling keeps it.
• A remodel crew held a house key for three months, along with the garage keypad code. The work is finished and the family is pleased, but they would like the key count reset. We rekey the exterior doors and the garage entry, help them change the keypad code, and walk the property to be sure nothing else, like a side gate or lockbox, still works for the crew.
• A burglar finds the spare key hidden under a flowerpot and walks in through the front door. After the police report, the family decides rekeying one door isn't enough, since the same key opened the back door and the garage entry. We re-pin every cylinder, retire the hiding spot and suggest a keypad entry for visitors.

From your call to the finished job

1. Count the keyholes before we arrive. Tell us why you're rekeying. A separation, an inherited house and years of loaned copies call for slightly different plans. Knowing the reason helps us ask about codes, remotes and hidden spares you might not think to mention.
2. Gather every key and show you belong at the address. Put every key you own on the table: house keys, garage keys, padlock keys, tiny keys for cabinets and window locks. We try each in each lock to learn what opens what. Some turn out to fit nothing, which is a useful finding.
3. Agree on the key plan before any pins come out. Choose the structure first: one key for the whole house, a second for the outbuilding, perhaps a master. We sketch it door by door and write down how many keys of each you want. Changing the plan afterward means pulling cylinders twice.
4. Rekey one door at a time and test as we go. We work in an order that keeps you secure: exterior doors first, then the garage, then gates and outbuildings. If your schedule allows only part of the job on one day, the most exposed doors are the ones finished first.
5. Cut, count and test every key. We'll hand you a short list showing which door takes which key. Keep it private, since it shows how your keys work. If you ever add a lock, the list tells you which keyway and key to match.
6. Reset what rekeying doesn't touch. Cut up or recycle the old keys so they can't be mistaken for current ones. Don't keep them just in case. Then store your master copy somewhere safe and away from the house, with the key list kept separately.

Pricing factors

• How long your inventory list turns out to be. Each keyed cylinder adds time, and whole-house jobs usually reveal more of them than owners expect. Counting gates, garage doors and screens, the total often runs higher than you'd guess. Our quote follows the list we build together on the walk-through.
• Locks at the edge of the property. Gates, sheds, mailbox and window locks are small items that add up. Each may be a different type: a rim lock, a padlock, a cam lock, a casement lock. Some are quick, and others are easier to replace. We price them as their own lines.
• Key plan, key count and timing. Combining jobs saves trips. If you're also adding a deadbolt, fitting a smart lock or repairing a sticking gate, mention it when you book. We can often fold those items into one visit and quote them together. Each item still gets its own line, so you can approve them one at a time.

Every job gets a clear quote before any work starts. Call (951) 903-3193 with the details and we'll tell you what to expect for your situation in Sierra Madre.

Advice before you book

• Collect keys before the visit. Gather every key from drawers, hooks, cars, kids' backpacks and the hide-a-key spot. Keys you can't match to a lock are still worth bringing, because we can try them, tell you what they open, and let you recycle the rest.
• Plan around pets and children. We move between yard and house repeatedly, opening gates and doors. Secure dogs indoors or in a bedroom before we arrive, and let us know about any gate that has to stay latched. Kids shouldn't be left with a spare key on a necklace.
• Ask about your mailbox separately. A private mailbox has its own small key and can usually be rekeyed or replaced. A cluster box belongs to the postal service or the HOA, and its locks follow their rules. Don't lump either one into your house key plan.
• Use every new key on day one. Try each in its lock from outside with the door closed behind you. A key that sticks now is a fixable problem. One that fails a month later is much harder to diagnose, and we'd rather adjust it while the tools are still out.

Mistakes to avoid

• Spending a rekey on a failing lock. A knob with a worn latch or a deadbolt chewed up by a past break-in will keep failing no matter how new the key is. Replace the weak hardware and key it to match, instead of nursing it along.
• Rekeying in pieces over several months. The front door this week, the back door next month, the gate eventually. The gaps stay open, the key set keeps changing, and you pay for several trips. Do the whole property once, using one agreed plan.
• Keeping the old keys just in case. They open nothing after the rekey, but a drawer of dead keys confuses everyone later and tempts someone to hand one out. Recycle them, and keep only the new, labeled set and one stored master copy.

Service in Sierra Madre

Sierra Madre is about 53 miles from our San Bernardino base, roughly 55 minutes in light traffic via I-215 South to SR-210 West. When you call, you get an arrival estimate based on where the technician is and the traffic at that moment.

Most trips into Sierra Madre use Grand View Avenue for at least part of the drive, and the technician keeps an eye on live traffic along the way so the arrival estimate you heard on the phone stays honest.

About Sierra Madre: Pacific Electric Red Cars served Sierra Madre from 1906 until the last train left on October 6, 1950.

Planning a rekey in Sierra Madre?

Call (951) 903-3193 and tell us how many doors you want on the new key and the brand of the locks if you know it. We'll quote the rekey before any work starts.